VNH5050ATR-E
Product Specifications
VNH5050ATR-E — Integrated Motor Driver / Smart Power Switch by STMicroelectronics
The VNH5050ATR-E is an STMicroelectronics integrated motor driver / smart power switch in PowerSSO-36 for automotive and industrial actuator control applications.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| VNH5050ATR-E | Full Part Number | STMicroelectronics Motor Driver / Power Switch |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | VNH5050ATR-E |
| Package | PowerSSO-36 |
| Type | Integrated Motor Driver / Smart Power Switch |
| Qualification | Automotive AEC-Q100 / Industrial |
Product Overview
The VNH5050ATR-E is an STMicroelectronics integrated motor driver / smart power switch in PowerSSO-36 package. Featuring ST's VIPower technology with monolithic integration of power MOSFETs, gate drivers, and protection/diagnostic circuitry, it simplifies motor control and high-side/low-side switching designs with reduced BOM count and enhanced reliability.
Key Features & Benefits
VIPower Monolithic Integration — Power + Control in One Package
ST's VIPower technology integrates N-channel power MOSFETs, gate drivers, charge pump, and comprehensive protection circuitry on a single die — eliminating external MOSFETs, bootstrap diodes, and sense resistors.
Comprehensive Protection & Diagnostics
Built-in overcurrent, overtemperature (thermal shutdown), undervoltage lockout, and load-dump protection with diagnostic feedback (current sense output, fault status flag) enables self-protecting designs suitable for safety-critical and autonomous systems.
Automotive-Grade Robustness
Designed to withstand harsh automotive and industrial environments including load dump, reverse battery, and extended temperature range for reliable operation in drone payload systems, robotics, and vehicle applications.
Target Applications
Drone Payload & Actuator Control
Drives brushed DC motors, solenoids, and resistive/inductive loads in drone gimbal systems, payload release mechanisms, landing gear actuators, and auxiliary power switching.
Automotive Body & Powertrain
Targets automotive applications including throttle control, EGR valves, HVAC actuators, mirror folding, headlamp leveling, and relay/lamp drivers — all requiring AEC-Q100 qualification.
Industrial Automation & Robotics
Powers motor control, valve actuation, and power distribution in industrial robots, conveyor systems, automated guided vehicles (AGVs), and factory automation equipment.
Frequently Asked Questions
What protection features does the VNH5050ATR-E include?
The VNH5050ATR-E features overcurrent protection, overtemperature shutdown, undervoltage lockout, and diagnostic feedback — ensuring robust, self-protecting operation in demanding environments.
Is external current sensing required?
No. The integrated current-sense output provides proportional load current feedback, eliminating the need for external shunt resistors and differential amplifiers.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics VNH5050ATR-E with full traceability and batch-level QA documentation. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
VNH5050ATR-E: a 30 A automotive H bridge with 50 milliohms per leg
VNH5050ATR-E is a fully integrated H bridge motor driver from STMicroelectronics in the PowerSSO-36 TP body, tape and reel. It handles 30 A of output current from a supply up to 41 V, with 50 milliohms maximum on resistance per leg, and it integrates a dual high side driver and two low side switches on three dies assembled on isolated lead frames. The part is aimed at automotive loads: window lifts, seat adjusters, pumps, throttle bodies and HVAC flaps.
What makes it usable without a pile of external parts is the protection set. Undervoltage and overvoltage shutdown, an overvoltage clamp, thermal shutdown, cross conduction protection and current and power limitation are all inside, and the current sense output gives a current proportional to the motor current so the controller can detect a stall without a shunt. The inputs are 3 V CMOS compatible, so a 3.3 V microcontroller drives it directly.
The vendor table for this code
| Function | Fully integrated H bridge motor driver |
| On resistance | 50 milliohms maximum per leg |
| Output current | 30 A |
| Maximum supply | 41 V |
| Input compatibility | 3 V CMOS |
| PWM operation | Up to 20 kHz, speed control in all four quadrants |
| Current sense | Output proportional to the motor current, with a disable pin |
| Protections | Undervoltage and overvoltage shutdown, overvoltage clamp, thermal shutdown, cross conduction, current and power limitation |
| Fault handling | Loss of ground and loss of supply, short to ground and short to supply |
| Standby | Very low standby power consumption |
| Package | PowerSSO-36 TP, three isolated lead frames |
| Technology | VIPower M0, ECOPACK package |
The 30 A rating and what it costs in heat
Fifty milliohms per leg at 30 A is 1.5 V of drop and 45 W of conduction loss in the bridge, which no package can hold. The 30 A figure is a peak and a short duration number, not a continuous one. At 10 A the loss is 5 W, which the PowerSSO-36 with its exposed pads and a proper copper area will carry, and at 15 A it is 11 W, which needs the board to be part of the thermal answer rather than an afterthought.
The current sense output is worth a paragraph of its own. It delivers a current proportional to the motor current, so a resistor to ground turns it into a voltage the microcontroller can read, and the disable pin puts the output into a high impedance state so several drivers can share one sense line. That is how a body controller distinguishes a stalled window motor from a normal end of travel, and it does it without a shunt in the motor path.
Where it is used, and the related pages
Typical loads are automotive actuators, pumps and flap motors, and the same part appears on industrial equipment that wants an automotive grade bridge. Related pages are power management cross reference, component traceability report for the automotive chain of custody, and incoming inspection plan.
Questions buyers ask on this code
Whether 30 A can be run continuously is the first, and it cannot: the conduction loss at that current is far beyond the package. The second is the supply ceiling of 41 V, which is chosen for a 12 V automotive rail with load dump protection ahead of it, and a 24 V system needs a different part. The third is the current sense accuracy, which is good enough for stall detection and not good enough for torque control, so a build that needs the second has to add a shunt.