Contact Us

ISO7241CDWR

Brand: Texas Instruments
Texas Instruments ISO7241CDWR is a power management component designed for Industrial Automation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ISO7241CDWR — Power Management & Signal Chain | Superb Automation

ISO7241CDWR

Texas Instruments — Power Management & Signal Chain

Product Overview

The ISO7241CDWR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

ISO7241CDWR: quad-channel digital isolator at 25 Mbps with three forward and one reverse channel

ISO7241CDWR is a four-channel digital isolator with three forward and one reverse channel at 25 Mbps in a SOIC body of 16 pins. The 7241 arrangement matches a four wire interface where the controller drives three lines and the peripheral answers on one. The C suffix is the 25 Mbps grade with TTL input thresholds and an input noise filter, which is the grade that tolerates a slow edge or a ringing line without passing the ring through as extra pulses.

Order code and package

Order codeISO7241CDWR
Functionquad-channel digital isolator
PackageSOIC, 16 pins, DW wide body
Channelsfour, three forward and one reverse
Signaling rate25 Mbps, the C grade
Input thresholdsTTL with an integrated input noise filter
Pulse width distortionspecified for the C grade in the switching table
Supply3.3 V or 5 V
ESD4 kV
Isolation2500 V RMS per UL 1577
Lifetimeover 25 years at the rated working voltage
Temperature rangeminus 40 to plus 125 C

Electrical parameters that decide the application

Barriersilicon dioxide
Grade options25 Mbps C suffix, 150 Mbps M suffix
Direction options7241 three forward one reverse, 7240 all forward, 7242 two and two
Noise filterrejects short transients at the input
OutputCMOS push pull
CertificationsVDE 0884-17, UL 1577, IEC 61010-1, IEC 62368-1
Channel to channel skew1 nanosecond maximum
Channel countfour in this body

Points to check before this part goes on a BOM

The input noise filter is the reason to choose the C grade on a real machine. A motor cable that couples a spike onto an enable line will pass that spike through an unfiltered isolator as a valid pulse, and the C grade rejects pulses shorter than its filter width.

TTL thresholds sit lower than CMOS thresholds, so a 3.3 V driver with a long trace still crosses the threshold at the far end. That is a small detail that decides whether an isolator works on a backplane with 30 centimetre stubs and fails on a short one.

Three forward and one reverse is the arrangement for an SPI link. A board that needs two returns has to move to the 7242 arrangement, and a board that needs all four lines the same way takes the 7240, both in the same body and the same pin count.

Twenty five megabits per second leaves margin for a 10 MHz SPI clock and its setup and hold margins. Pushing the clock to the 25 Mbps limit spends all of that margin on the isolator and none on the cable, which is why a link that works on the bench fails when the harness is fitted.

Where this order code fits

Isolated SPI ports, motor drive control interfaces and industrial IO cards order this code because three forward lines and one return line is exactly what those interfaces use. Boards comparing it with a neighbouring part start from our Pin to Pin Cross Reference page, and boards replacing a part that has gone end of life start from the BOM Consolidation page.

Questions buyers ask

Is the reverse channel fast enough for a status line? Yes, 25 Mbps covers any status or acknowledge line used with this channel arrangement.

Does the C grade need a different supply? No, it runs from 3.3 V or 5 V on each side like the M grade, with TTL thresholds and a noise filter instead of CMOS thresholds.

SUPERB holds and sources this Texas Instruments line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a line is moving, the Supplier Quality Audit page sets out the checks that keep a substitute from failing on the bench.