ISO7240MDWR
Product Specifications
ISO7240MDWR
Texas Instruments — Power Management & Signal Chain
Product Overview
The ISO7240MDWR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
ISO7240MDWR: quad-channel digital isolator at 150 Mbps with all four channels in the same direction
ISO7240MDWR is a four-channel digital isolator with every channel facing the same way at 150 Mbps in a SOIC body of 16 pins. The 7240 arrangement puts all four channels in one direction, which is what an isolated parallel bus or a wide control word needs. The M suffix is the 150 Mbps grade, pulse width distortion is 2 nanoseconds maximum, and the 16-pin wide body gives the creepage that a 2500 V RMS barrier needs at the board edge.
Order code and package
| Order code | ISO7240MDWR |
| Function | quad-channel digital isolator |
| Package | SOIC, 16 pins, DW wide body |
| Channels | four, all in the same direction |
| Signaling rate | 150 Mbps, the M grade |
| Pulse width distortion | 2 nanoseconds maximum |
| Channel to channel skew | 1 nanosecond maximum |
| Jitter | 1 nanosecond typical at 150 Mbps |
| Supply | 3.3 V or 5 V |
| ESD | 4 kV |
| Isolation | 2500 V RMS per UL 1577 |
| Lifetime | over 25 years at the rated working voltage |
| Temperature range | minus 40 to plus 125 C |
Electrical parameters that decide the application
| Barrier | silicon dioxide |
| Grade options | 25 Mbps on the C suffix, 150 Mbps on the M suffix |
| Direction options | 7240 all forward, 7241 three forward one reverse, 7242 two and two |
| Default output | the CF suffix of the 7240 allows the default state to be selected |
| Input thresholds | CMOS on the M suffix, TTL with an input noise filter on the C suffix |
| Certifications | VDE 0884-17, UL 1577, IEC 61010-1, IEC 62368-1 |
| Output | CMOS push pull on every channel |
| Channel count | four in this body |
Points to check before this part goes on a BOM
All four channels in one direction is the arrangement for a parallel bus. A board that needs three forward and one reverse has the 7241 in the same body size, and putting the 7240 in that socket leaves one signal with no return path at all.
Two nanoseconds of pulse width distortion is the number that limits how far a narrow pulse survives the barrier. At 150 Mbps a bit is 6.7 nanoseconds, so a two nanosecond change in width is nearly a third of a bit and the receiver at the far end needs the sampling point set from the worst case rather than the typical one.
The M suffix uses CMOS input thresholds while the C suffix uses TTL thresholds with an input noise filter. A slow or noisy signal on the M part can toggle at the threshold, while the same signal on the C part is filtered, so the grade choice is about the signal as much as about the rate.
The wide body is what buys the isolation rating. The same die in a narrow 8-pin body is a dual-channel part with a lower working voltage, so a comparison that matches on data rate and misses the body is comparing two different barriers.
Where this order code fits
Isolated data acquisition front ends, motor control interface cards and parallel bus extenders order this code when a whole word has to cross one barrier at full speed. Boards comparing it with a neighbouring part start from our Pin to Pin Cross Reference page, and boards replacing a part that has gone end of life start from the Component Lead Time Solutions page.
Questions buyers ask
Can one channel be reversed? No. The direction of each channel is fixed in silicon; the 7241 carries three forward and one reverse in the same 16-pin body.
Does the part need a supply on both sides? Yes, one supply per side within the 3.3 V to 5 V range, and the barrier isolates data only.
SUPERB holds and sources this Texas Instruments line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a line is moving, the How to Verify a Drop in Replacement page sets out the checks that keep a substitute from failing on the bench.