Contact Us

VNLD5300TR-E

Brand: ST
VNLD5300TR-E is a motor driver IC from STMicroelectronics, designed for drone motor control, ESC gate drivers, and robotic actuator control. Superb Automation supplies genuine VNLD5300TR-E with full traceability, competitive pricing, and fast global delivery — supporting prototype to production volumes for drone, robotics, and industrial customers worldwide.
quote now

Product Specifications

VNLD5300TR-E — Integrated Motor Driver / Smart Power Switch by STMicroelectronics

The VNLD5300TR-E is an STMicroelectronics integrated motor driver / smart power switch in SOIC-8_150mil for automotive and industrial actuator control applications.

Part Number Decoded — Field by Field

FieldValueMeaning
VNLD5300TR-EFull Part NumberSTMicroelectronics Motor Driver / Power Switch

Quick Specifications

ParameterValue
ManufacturerSTMicroelectronics
Part NumberVNLD5300TR-E
PackageSOIC-8_150mil
TypeIntegrated Motor Driver / Smart Power Switch
QualificationAutomotive AEC-Q100 / Industrial

Product Overview

The VNLD5300TR-E is an STMicroelectronics integrated motor driver / smart power switch in SOIC-8_150mil package. Featuring ST's VIPower technology with monolithic integration of power MOSFETs, gate drivers, and protection/diagnostic circuitry, it simplifies motor control and high-side/low-side switching designs with reduced BOM count and enhanced reliability.

Key Features & Benefits

VIPower Monolithic Integration — Power + Control in One Package

ST's VIPower technology integrates N-channel power MOSFETs, gate drivers, charge pump, and comprehensive protection circuitry on a single die — eliminating external MOSFETs, bootstrap diodes, and sense resistors.

Comprehensive Protection & Diagnostics

Built-in overcurrent, overtemperature (thermal shutdown), undervoltage lockout, and load-dump protection with diagnostic feedback (current sense output, fault status flag) enables self-protecting designs suitable for safety-critical and autonomous systems.

Automotive-Grade Robustness

Designed to withstand harsh automotive and industrial environments including load dump, reverse battery, and extended temperature range for reliable operation in drone payload systems, robotics, and vehicle applications.

Target Applications

Drone Payload & Actuator Control

Drives brushed DC motors, solenoids, and resistive/inductive loads in drone gimbal systems, payload release mechanisms, landing gear actuators, and auxiliary power switching.

Automotive Body & Powertrain

Targets automotive applications including throttle control, EGR valves, HVAC actuators, mirror folding, headlamp leveling, and relay/lamp drivers — all requiring AEC-Q100 qualification.

Industrial Automation & Robotics

Powers motor control, valve actuation, and power distribution in industrial robots, conveyor systems, automated guided vehicles (AGVs), and factory automation equipment.

Frequently Asked Questions

What protection features does the VNLD5300TR-E include?

The VNLD5300TR-E features overcurrent protection, overtemperature shutdown, undervoltage lockout, and diagnostic feedback — ensuring robust, self-protecting operation in demanding environments.

Is external current sensing required?

No. The integrated current-sense output provides proportional load current feedback, eliminating the need for external shunt resistors and differential amplifiers.

What is the minimum order quantity (MOQ)?

Contact SUPERB Automation for a tailored quote. We support quantities from prototype to full production volumes.

Request a Quote

SUPERB Automation supplies genuine STMicroelectronics VNLD5300TR-E with full traceability and batch-level QA documentation. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.

VNLD5300TR-E: a 300 milliohm protected low side switch

VNLD5300TR-E is an automotive low side driver in the SO-8 body, on tape and reel, built on the VIPower process and protected on chip. It switches a load whose other side is connected to the battery, carries 2 A of drain current, holds 300 milliohm on resistance and clamps at 41 V. Thermal shutdown with automatic restart, current and power limitation, and fast demagnetisation of inductive loads are all inside the package.

The low side position is the useful part of the story. A low side switch sits between the load and ground, so the gate drive is referenced to ground and the controller can drive it directly, while the load keeps the battery voltage on its high side. That arrangement is standard for relays, solenoids, lamps and heaters in a body or industrial module.

Figures come from the VNLD5300-E data sheet read this round, which prints 300 milliohm, 2 A, a 41 V clamp, AEC-Q100 qualification, and a thermal shutdown that restarts automatically when the fault clears.

The switch in numbers

FunctionProtected low side driver for resistive and inductive loads
Drain current2 A
On resistance300 milliohm
Clamp voltage41 V
Thermal behaviourShutdown with automatic restart when the fault clears
Current behaviourCurrent and power limitation during overload
Inductive loadsFast demagnetisation at turn off
StandbyVery low standby current
ImmunityVery low electromagnetic susceptibility, ESD protected
QualificationAEC-Q100
PackageSO-8
PackingTape and reel

Loss at 2 A and the reason for the 41 V clamp

At 300 milliohm, 1 A costs 0.3 W and 2 A costs 1.2 W, which the SO-8 body can hold with a copper pour under it. The 41 V clamp is above a 24 V rail with margin and above a 12 V rail with a lot of margin, so the part survives the inductive kick of a solenoid without an external diode. The automatic restart is the behaviour that matters in service: a transient short cycles the channel rather than latching the module off until someone clears the fault.

That restart behaviour is also a constraint. A load that is shorted permanently will cycle the channel indefinitely, heating the die each time, so the controller should count the restarts and report a fault after a defined number rather than leave the module cycling in a parked state.

Comparing it with the OMNIFET family

The VNLD5300-E is the third generation of the protected low side family, and the earlier OMNIFET II strings carry a similar function at different resistance and current limit. A customer replacing a 3.5 A OMNIFET channel with this 2 A part is reducing capability, and the arithmetic has to be done before the substitution is approved, not after the board is built.

We keep both generations on the shelf and quote them by the load rather than by the price. The power management cross reference page lists the strings and their limits side by side, the incoming inspection plan page covers the goods in checks, and the PPAP submission checklist page covers the automotive paperwork.

Where the part is used

Relay and solenoid drive in body modules, lamp and heater switching, and small motor drive in one direction. In an industrial module the same device appears wherever a 24 V load has to be switched from a logic level signal with a ground referenced output.

We supply the string and hold the reel and date code record for each lot that goes onto a line, because a protected switch is often the part that decides whether a field return is a module failure or a harness failure.

Three questions buyers ask about this string

Does it need a freewheel diode? The clamp covers the inductive kick within its energy capability, and an external diode is still worth adding for a large coil switched often.

Is the on resistance 300 milliohm at temperature? That is the figure printed for the device. Resistance rises with junction temperature, so the hot loss is higher than the 25 degree arithmetic.

Can it switch a 24 V load? Yes, with the 41 V clamp above the rail, but the load current and the ambient both have to be checked against the 2 A rating and the package thermals.