ISO6721FQDWVRQ1
Product Specifications
ISO6721FQDWVRQ1
Texas Instruments — Power Management & Signal Chain
Product Overview
The ISO6721FQDWVRQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
ISO6721FQDWVRQ1: The Automotive Quad Flat Body Version of the Dual 50 Mbps Isolator
ISO6721FQDWVRQ1 is an automotive grade dual-channel digital isolator with one channel each way in a SOIC (DW) body of 16 pins. It is the automotive qualified member of the ISO672x dual family, one channel each way with the low default, and the industrial document that carries the electrical tables does not print the automotive reel rows.
Order code and package
| Ordering string | ISO6721FQDWVRQ1 |
| Family | ISO672x-Q1, the automotive and reinforced option named in the industrial document |
| Package implied by the suffix | SOIC, 16 pins, DW wide body |
| Reel and packing | Not printed in SLLSFJ0F, confirm on the automotive addendum and the label |
| Industrial reference row | ISO6721FBDR, 3000 pieces on a large reel, level 2, marking 6721FB |
| Temperature range | Minus 40 to plus 125 degrees on the industrial rows |
| Channel direction | One channel each way |
| Default output | Low, the F suffix sets it |
| Isolation class | Reinforced, which is why the automotive family exists separately |
Electrical parameters that decide the application
| Signaling rate | 50 Mbps on the industrial rows of the same silicon family |
| Supply range | 1.71 to 1.89 V, or 2.25 to 5.5 V, per side |
| Level translation | 1.71 V to 5.5 V |
| Supply current per channel | 1.8 mA typical at 1 Mbps |
| Propagation delay | 11 ns typical, 18 ns maximum at 5 V |
| Pulse width distortion | 0.2 ns typical, 7 ns maximum at 5 V |
| Common mode transient immunity | 150 kV per microsecond typical, 100 kV per microsecond minimum |
| Common mode rejection | Above 25 kV per microsecond at the minimum rail |
| ESD across the barrier | Plus or minus 8 kV IEC 61000-4-2 contact discharge |
| Channel to channel skew | 0.2 ns typical at 5 V |
| Part to part skew | 6 ns maximum |
| Barrier | Double capacitive silicon dioxide |
| Enable pin | Not present on the dual body |
| Fail state | Output driven to the default level, low on this suffix |
Family variants and how they differ
| ISO6721FBDR | Industrial version of the same channel split and the same low default |
| ISO6721BDR | Industrial version with the high default |
| ISO6721RFBDR | Reversed pin arrangement, low default, for a board that needs the barrier on the far side |
| ISO6720FBDR | Both channels forward with the low default |
| ISO7741-Q1 | Quad automotive isolator at 100 Mbps when two channels are not enough |
| ISO6741FDWR | Industrial quad at 50 Mbps as a cost reference |
Points to check before this part goes on a BOM
The automotive rows are not printed in the industrial document. This page states the reel size, the moisture level and the part marking from the industrial rows of the same silicon and leaves the automotive cell open rather than copying a figure that was never printed.
The low default matters in an automotive rail sequence where the controller can come up after the isolated stage. A line that must read low during that window needs the F suffix, not the plain part.
Reinforced isolation is the reason to take the Q1 body. The industrial ISO672x in the eight pin body carries a basic rating, so a system that needs reinforced has no cheaper member of this family.
The 16 pin wide body gives a larger creepage than the eight pin narrow body that the industrial rows use, and the addendum has to be read for the body before the footprint is fixed.
The reversed pin option exists in this family too, and it is a separate ordering string. A board that was routed for the standard pin order cannot take the reversed body without changing the copper.
Two channels is the ceiling in the eight pin body. A three or four line interface in the same application moves to the quad families, which have a different body and a different clearance.
The tape width letter and the reel suffix both appear in this string, and both are packing facts rather than electrical ones. A purchase order that gets either wrong receives a part that works and cannot be fed to the line.
The Q1 string is normally bought against a customer drawing rather than a catalogue line, and the reel size is stated on that drawing. A distributor listing that shows a quantity for the industrial part is not evidence for the automotive part.
Reading a suffix that the industrial document does not print
The letters in this string each carry information. Q1 is the automotive qualification, F sets the default output low, DW is the wide body, V marks the tape width and R is the reel. Four of those six facts can be read from the industrial rows and two cannot, and the page keeps that split visible instead of presenting the whole string as confirmed.
Where an automotive dual isolator is actually used
The common case is a controller on one rail and a transceiver or gate driver on another, with the two grounds that cannot be tied because one of them is the chassis and the other is a signal reference. Two channels cover the drive signal and the fault return, and the low default keeps the driver off while the controller is still booting.
The second case is a sensor interface where the sensing element sits on a floating supply. The channels carry a clock out and data back, and the isolation class is set by the fault voltage the harness can deliver rather than by the signal level.
Paperwork that has to be collected before a build
An automotive part is bought with documents as well as with a reel. The qualification report, the moisture classification, the marking and the reel label all have to match the drawing that the customer approved, and a distributor page is not one of those documents.
That is the practical reason this page separates what the industrial document prints from what it does not. Where the reel cell is unknown, the answer is a request to the vendor for the automotive addendum, not a figure taken from a neighbouring row of a different family.
Eight pin body against sixteen pin body
The industrial dual lives in an eight pin narrow body and the automotive version in a sixteen pin wide body. The wide body buys clearance and creepage, and the automotive requirement is what pays for it. A product that does not need the reinforced class should not carry the larger footprint for the sake of a family name.
The channel count is identical, which means the function can be proven on the industrial part and the production build moved to the automotive string once the qualification documents exist. The pin maps differ, so the two are not interchangeable on one board.
Where this order code fits
It is specified where a vehicle rail sequence can leave the isolated side live after the controller has dropped, and where a basic barrier is not accepted. Teams comparing it with a neighbouring part start from our How to Verify a Drop in Replacement page, and teams replacing a part that has gone end of life start from the Incoming Inspection Plan page.
Questions buyers ask
Can the industrial ISO6721FBDR be used as a substitute? Electrically it is the same channel split and the same rate, but the isolation class and the qualification are different, so a substitution has to be approved against the automotive requirement rather than the electrical table.
Which document carries the automotive reel rows? The ISO672x-Q1 addendum. The industrial document used for this page names the automotive family and stops there, which is why the packing cell on this page is left open.
What is the practical effect of the low default? On power up the output reads low until the input side is powered and stable, so a receiver that treats a low as a start condition sees a false start unless the protocol allows for it.
SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the Pin to Pin Cross Reference page sets out the checks that keep a substitute from failing on the bench.