Contact Us

DRV8461SPWPR

Brand: Texas Instruments
Texas Instruments DRV8461SPWPR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

DRV8461SPWPR — Power Management & Signal Chain | Superb Automation

DRV8461SPWPR

Texas Instruments — Power Management & Signal Chain

Product Overview

The DRV8461SPWPR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

DRV8461SPWPR: 65 V, 3 A and a load adaptive current loop

The DRV8461SPWPR is the 28-pin HTSSOP body of the DRV8461, a bipolar stepper driver rated 65 V and 3 A full scale per bridge. It is the top of the 16 to 28 pin ladder in this family and it carries the features that the smaller members leave out: sensorless stall detection, open load detection, automatic microstepping, a standstill power saving mode and an auto torque function that changes the winding current with the load instead of holding it at a fixed value.

The supply range is 4.5 V to 65 V operating with 70 V absolute maximum, and the vendor states the 24 V, 36 V and 48 V rails as the intended ones. On resistance is 300 mOhm high side plus low side at 24 V and 25 C, the lowest in the family, and the current is quoted as 3 A full scale and 2.1 A rms per bridge. At 2.1 A rms the conduction loss across both phases is about 2.6 W, which is a real thermal problem and the reason the 28-pin body with its 62 mm squared pad exists at all.

The interface is either SPI or hardware, and the SPI port gives access to the stall detection thresholds, the auto torque setting, the microstepping table and the diagnostics. Automatic microstepping interpolates between the step pulses the controller sends and the microsteps the driver applies, so a controller can send 1/16 step pulses and the driver still runs the motor smoothly at a finer resolution. Standstill power saving reduces the current when the motor is not moving, which matters on a battery instrument that holds a position for hours.

Protection covers undervoltage, charge pump undervoltage, overcurrent, thermal shutdown and an open load report, with nFAULT and an indexer home output called nHOME. Sleep current is 2.5 microamps, spread spectrum is included, and the logic supply is separate at VCC so a 1.8 V processor can drive the pins directly.

Key data for the DRV8461SPWPR

Operating supply4.5 V to 65 V, absolute maximum 70 V, built around 24 V, 36 V and 48 V rails
Current3 A full scale, 2.1 A rms per bridge
On resistance300 mOhm high side plus low side at 24 V and 25 C
InterfaceSPI or hardware, STEP and DIR pins in both cases
MicrosteppingUp to 1/256, automatic microstepping interpolation, custom indexer table
Current senseInternal, plus or minus 6 percent full scale, no sense resistors
DiagnosticsSensorless stall detection, open load, overtemperature, nFAULT, nHOME
Power savingStandstill mode and auto torque load adaptive current
Sleep current2.5 microamps typical
TemperatureMinus 40 C to plus 125 C operating

Body, packing and marking data

Body in this code28-pin HTSSOP, the PWP outline, 9.70 mm by 6.40 mm, 62 mm squared with a PowerPAD
Other body44-pin HTSSOP, the DDW outline, 14.00 mm by 8.10 mm, 113 mm squared
Pin compatibilityPWP shares its footprint with DRV8434, DRV8452, DRV8424 and DRV8426; DDW shares with DRV8452DDWR and DRV8462DDWR
CarrierTape and reel; the count is per order code and read from the vendor addendum row

Reading the code before you buy it

DRV8461 is the circuit, PWP is the 28-pin HTSSOP, S is not part of the circuit name here but belongs to the order code you find on the reel, and the trailing R is the large reel. The 44-pin DDW body is the one to pick when the current has to go to 5 A, because the vendor lists the DDW footprint as shared with DRV8452 at 55 V and 5 A and DRV8462 at 65 V and 5 A. Same copper, more current, more heat to remove.

That pin to pin ladder is the single most useful fact about this order code for a sourcing file. A machine that runs at 3 A today can move to 5 A on the same pad without touching the copper, and a machine that runs at 2.5 A can drop down to the DRV8434 in the same PWP footprint if the 65 V part is on allocation. The differences that come with the move are the on resistance and the current accuracy, not the pinout. Our pin to pin cross reference page keeps the electrical side of that table.

One caution on the letters: the S in the reel marking is easy to confuse with the S in DRV8434S, and the two circuits are not related by that letter. The check is always the full order code against the addendum row, not the marking on the top of the package.

Where the DRV8461SPWPR fits

48 V industrial steppers above 2 A per phase are the target: packaging lines, textile machinery, CNC axes, and the larger laboratory automation stages. The 65 V rating is what makes a 48 V system practical, because a 48 V supply that is set at 52 V and rings to 60 V on a fast stop is still inside the operating window rather than above the absolute maximum.

Battery and portable instruments use the standstill power saving and the auto torque function, both of which cut the winding current when the load is light. A pump that holds pressure for an hour at 20 percent of its rated torque draws a fifth of the current with auto torque on, and the difference is the battery life of the instrument.

Robotics and defence platforms use the stall detection in place of limit switches in places where a switch cannot be mounted or where the wiring would be exposed. Our drone and UAV components page covers the gimbal and actuator builds where we see this part, and the incoming inspection we run on the reel before it goes to the line.

Questions we get on this code

Does auto torque need a calibration per motor? Yes. The function measures the load from the current waveform and adjusts, but the starting point and the limits come from registers that are set for the motor. Two motors of the same model from two batches usually share a setting, and two different models do not.

How does automatic microstepping differ from 1/256 mode? 1/256 mode takes 256 step pulses per full step from the controller, so the controller has to generate that pulse rate. Automatic microstepping takes the pulses the controller sends, for example 1/16, and interpolates them internally to a finer resolution, so the controller runs at a modest rate and the motor still runs smoothly.

What is the thermal limit at 3 A? At 2.1 A rms and 300 mOhm the two phases dissipate about 2.6 W, and the 62 mm squared pad on a four layer board with vias will hold a rise of roughly 40 C to 50 C in still air. An enclosure without airflow needs the 44-pin body, which is why the DDW option exists.

Can it be driven from 12 V? The range starts at 4.5 V so a 12 V rail is inside it, but the on resistance figure and the current rating are for the higher rails and the part is more than a 12 V system needs. The 16-pin members cover 12 V at a lower cost and a smaller footprint.