Contact Us

CD4094BE

Brand: Texas Instruments
Texas Instruments CD4094BE is a power management component designed for Industrial Automation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

CD4094BE — Power Management & Signal Chain | Superb Automation

CD4094BE

Texas Instruments — Power Management & Signal Chain

Product Overview

The CD4094BE from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

CD4094BE: the eight stage shift register in a 16-lead plastic DIP

The CD4094BE is the plastic dual in line entry for the CD4094B, an eight stage serial shift register with a storage latch on each stage and three state parallel outputs, in a 16-lead body. The vendor page lists the device as ACTIVE with eight bits, serial input, a clock of 3 MHz in the parametric table, a drive of 4.2 mA in both directions, a maximum supply current of 3000 microamps and an operating range of minus 55 to plus 125 degrees. The tube row is 25 pieces with a nickel palladium gold finish, and the marking is CD4094BE.

The part is chosen for the two things that a plain shift register does not do. The storage latch lets the parallel outputs hold their last value while the next byte is shifted in, so a display or a relay bank does not flicker during an update. The three state outputs let several devices share one bus. The vendor describes data shifting on the positive clock edge, transfer to the storage register while the strobe input is high, and outputs appearing while the output enable is high, which is the sequence a driver has to follow.

The CD4094B rows as the addendum publishes them

Part classEight stage serial shift register with latched three state outputs
Vendor descriptor8-bit serial-in shift register, 3 state parallel outputs
Vendor statusACTIVE, catalogue rating
Data sheetSCHS054 family document, acquired from Harris Semiconductor
Package addendum date18 September 2026
Supply range3 V to 18 V, 20 V type rating in the headline
Clock3 MHz in the parametric table, 5 MHz typical at 10 V in the feature list
Output drive4.2 mA sink and source
Supply current3000 microamps maximum
Serial outputsQS on the positive edge and Q'S on the negative edge, for cascading
Parallel outputsEight, three state, controlled by the output enable input
Latch controlStrobe input transfers the shift register to the storage latch
Input current1 microamp at 18 V over temperature, 100 nA at 25 degrees
PDIP body16 leads, 181.42 square millimetres, 19.3 by 9.4 mm
PDIP rowsCD4094BE and CD4094BE.A, 25 pieces, Active
SOIC bodyNot offered, the family has no D body
SOP reel rowCD4094BNSR, 2000 pieces, Active
TSSOP tube rowCD4094BPW, Obsolete, blank quantity, Call TI
TSSOP reel rowCD4094BPWR, 2000 pieces, Active
Ceramic rowsCD4094BF Active at 25 pieces, CD4094BF3A Last Time Buy
Military rows7702501EA on the F3A rows, Last Time Buy

The missing SOIC body is the fact that surprises people. Every other 16-lead device in this band offers a D body with a 2500 piece reel, and this one does not. The surface mount formats are the SOP at 2000 pieces and the TSSOP at 2000 pieces, and the TSSOP tube is closed. A board that was laid out for a wide SOIC has to change footprint or stay with the plastic DIP, and that is a board change rather than a substitution.

What the parametric table fixes

The clock figure needs to be read carefully. The parametric table lists 3 MHz, and the feature list says medium speed operation at 5 MHz typical with a 10 V rail. The two are not the same statement: 3 MHz is the catalogue entry, 5 MHz is a typical at one rail, and a board that needs a guaranteed 5 MHz has no such promise on this page. A cascaded chain also loses margin, because the second device sees the first device's serial output delayed by the clock to output time.

The supply current of 3000 microamps maximum is twenty times the quiescent current of a quad gate in the same family. That is the cost of eight flip-flops, eight latches and eight three state output stages. A battery product that keeps the register powered with the clock stopped still pays the quiescent figure, and a product that scans the register continuously pays more.

Drive is 4.2 mA, which is lower than the 6.8 mA of the gate family, because the output stage is shared with the three state function. That figure is enough for a CMOS input and for a small light emitting diode at low current, and it is not enough for a relay coil. The vendor also states a maximum input current of 1 microamp at 18 V over the full temperature range, which is the leakage a driving stage has to supply.

Where the plastic DIP is the right choice

At 181.42 square millimetres the plastic DIP is the largest body in the family and the only one that can be socketed. For a driver board that fans out to a display, a relay bank or a lamp panel, the socket is worth the area because the register is the part most likely to be damaged by a field fault on the load side. A 25 piece tube also keeps a spare on the shelf without a moisture controlled store.

The alternative is the SOP at 79.56 square millimetres or the TSSOP at 32, both on 2000 piece reels. Neither can be socketed and neither is offered in a tube that is still live on the TSSOP side. A board that is built in the thousands should take the SOP, and a board that is repaired in the field should take the DIP, and the two decisions are made at different stages of a programme.

What the documents do not publish

No maximum clock at temperature, no setup and hold times, no output enable time and no bus contention rating appear on the page. Those are in the data sheet, and for a shift register they matter more than the typical clock, because a strobe that arrives early transfers the wrong byte and a bus that turns on two drivers at once is a fault. The page also does not print the sequence table for strobe and output enable, which is the first thing a driver needs.

There is one more timing detail on the page worth recording. The two serial outputs are not interchangeable: QS changes on the positive clock edge and is the one to use when the clock rise time is fast, while Q'S changes on the next negative edge and exists for cascaded systems where the clock edge is slow. A chain that mixes the two outputs across devices will add a half clock of skew per stage, and at 3 MHz that half clock is 167 ns, which is larger than the propagation delay of the register itself and enough to corrupt the last stage of a long chain of eight or sixteen registers, so the choice is made once for the whole chain and recorded on the drawing.

Second source and long term availability

The CD4094B is second sourced under the same number, and the nearest alternative is a 74HC595, which has a different pin out and a different latch arrangement, so it is a board change. The ceramic F3A row is Last Time Buy, which means the wide temperature option is closing even though the plastic rows are active. The last time buy and LTB planning page explains how a final order is sized, and the obsolete part cross reference hub covers the equivalence checks for a replacement.

What to send with an enquiry

Send the string, the body, the quantity and the date. If the board is surface mount, confirm whether the SOP footprint is available, because there is no SOIC body for this device and the TSSOP tube is closed. If the register drives a load, say what the load is, because the 4.2 mA drive decides whether a buffer is needed. The BOM shortage recovery page explains how a closed body is handled when a build is already released.