Contact Us

CD4046BD

Brand: Texas Instruments
Texas Instruments CD4046BD is a power management component designed for Industrial Automation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

CD4046BD — Power Management & Signal Chain | Superb Automation

CD4046BD

Texas Instruments — Power Management & Signal Chain

Product Overview

The CD4046BD from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

CD4046BD: the small outline suffix the vendor addendum does not publish

The CD4046BD is the 16-lead small outline entry in this catalogue for the CD4046B micropower phase-locked loop, the CMOS part that carries a voltage controlled oscillator, two phase comparators, a source follower demodulator output and a zener reference on one die. The vendor product page describes the family in one line as a CMOS micropower phase-locked loop and marks it ACTIVE, with a catalogue rating and an operating range of minus 55 to plus 125 degrees. What the vendor does not do is offer a D body: the package option addendum dated 18 September 2026 lists sixteen orderable rows for this family and not one of them is a small outline integrated circuit.

That single fact changes how the part number on a bill of materials has to be read. The D suffix is a body code, and a body code that no longer appears in the addendum cannot be quoted, cannot be scheduled and cannot be shipped, however familiar the string looks on a drawing from 1998. The 2003 revision of the vendor document is explicit about the bodies it covers: 16-lead hermetic ceramic with the F3A suffix, 16-lead plastic dual in line with the E suffix, 16-lead small outline with the NSR suffix and 16-lead thin shrink small outline with the PW and PWR suffixes. Four families of body, and the small outline NSR body is the one that sits closest to a D footprint in pitch and lead count.

The CD4046B rows as the vendor addendum publishes them

Part classCMOS micropower phase-locked loop, VCO plus two phase comparators
Vendor descriptorCMOS Micropower Phase-Locked Loop, catalogue rating
Vendor documentSCHS043B, revised July 2003, acquired from Harris Semiconductor
Package addendum date18 September 2026
Rows in the addendum16, covering E, F, F3A, NSR, PW and PWR bodies
Small outline rowNone, the family has no D body
SOIC equivalentCD4046BNSR and CD4046BNSR.A, 2000 pieces on a large reel
TSSOP rowsCD4046BPW 90 piece tube, CD4046BPWR 2000 piece large reel
PDIP rowCD4046BE, 25 pieces in a tube
Ceramic rowsCD4046BF and CD4046BF3A, 25 pieces in a tube, SNPB finish
Military drawing row5962-9466401MEA, CDIP, 25 pieces in a tube
Supply range3 V to 18 V, with 5 V, 10 V and 15 V parametric ratings
Power consumption70 microwatts typical at a 10 kHz VCO frequency and 5 V supply
Operating frequencyUp to 1.4 MHz typical at 10 V with a 5 k timing resistor
Frequency drift0.04 per cent per degree typical at 10 V
VCO linearityBetter than 1 per cent typical at 10 V
Phase comparatorsExclusive-OR network, and edge controlled memory network with phase pulse output
Extra functionsVCO inhibit for on-off keying, source follower demodulator output, zener diode
Quiescent currentTested on every unit at 20 V
Operating rangeMinus 55 to plus 125 degrees
Marking on the reel bodyCD4046B, per the NSR rows

What the loop does at 5 V and at 10 V

The headline frequency is 1.4 MHz typical, and the condition attached to it matters as much as the number. That figure belongs to a 10 V supply with a 5 kilohm timing resistor, so a board running the loop from 5 V sits well below it. The vendor prints no 5 V maximum in the text of the document, and the Harris era switching tables that would carry the curve are scans rather than text, so this page does not invent a 5 V figure. What it does publish is the 70 microwatt consumption at 10 kHz from 5 V, which is the number that decides whether the loop can stay biased in a battery instrument.

Drift is the second number an engineer sizing a locking loop looks for, and the vendor gives 0.04 per cent per degree at 10 V. Over a 100 degree swing that is a 4 per cent move in frequency, which is inside the pull-in range of a loop built around a 1 per cent linear VCO but outside a narrow band application that expects the free running frequency to sit still. The linearity figure of better than 1 per cent is what makes the part usable as a modulator rather than only as a clock recovery block, because a nonlinear VCO turns an analogue control voltage into distortion on the demodulated output. A loop that has to hold a carrier at 10.7 MHz from a 5 V rail therefore needs its own frequency measurement rather than a figure carried over from the 10 V row, and the vendor's 1.4 MHz headline does not describe that case at all.

The two phase comparators are not interchangeable and the vendor says so in the feature list. Comparator one is an exclusive-OR network with a linear transfer through the lock range and no lock indicator. Comparator two is an edge controlled memory network with a phase pulse output that doubles as a lock indication and a much wider capture window. A loop that has to acquire from cold without a sweep generator takes comparator two; a loop that has to hold a clean phase relationship on a noisy carrier takes comparator one and pays for it with a narrower capture range.

Why a D body disappeared from a family that still ships

The CD4046B is not an obsolete part. Every row in the addendum is Active, including the ceramic body that feeds the military drawing, which is unusual for a logic family first released in the 1970s. What happened is narrower than obsolescence: the small outline body fell out of the catalogue while the SOP and TSSOP bodies, which carry the same die in a thinner package, stayed. A purchasing system that keys on the D suffix will report a lead time of never, while the same die sits on a 2000 piece reel under the NSR suffix.

The practical difference between the two surface mount bodies is board area and stencil. The SOP body measures 79.56 square millimetres at 10.2 by 7.8 millimetres, the TSSOP body 32 square millimetres at 5 by 6.4 millimetres, and the PDIP body 181.42 square millimetres at 19.3 by 9.4 millimetres. A board with the room takes the SOP for the wider lead pitch and easier inspection; a board that is already tight takes the TSSOP and accepts 0.65 millimetre pitch. Both are tape and reel at 2000 pieces, both carry a nickel palladium gold finish and moisture level 1 unlimited floor life, and both are marked with the family code rather than the body code, which is why a reel label has to be read rather than the top mark alone. A 16-lead SOP footprint is also the closest existing pad set on a legacy board, which is why the NSR row is the one most often used when a drawing is converted from the D suffix without touching the copper.

What the document cannot tell a buyer

This page states where the vendor text stops. The 2003 document is a scan of the Harris original, so the VCO frequency against timing capacitor curves, the phase comparator transfer characteristics and the capture and lock range tables are images. No figure from those tables is quoted here. A customer who needs a guaranteed lock range at a specific supply has to work from the parametric tables in the printed document or from a bench measurement on the actual board, and any supplier who quotes a lock range from memory is guessing.

Where the family sits against a modern replacement

TI lists a drop-in replacement with upgraded functionality against the CD4051B and the CD4066B, and the same shelf of parts invites the question for the 4046B. There is no pin compatible successor published for the loop itself, so a board that has to keep the same footprint stays on the CD4046B, and a board that is free to change can move to a modern PLL with a divider and a smaller package. Keeping the original is not a compromise when the alternative is a re-qualification of the locking loop in a radio that already passed type approval.

Customers who come to us with the D suffix on a bill of materials usually want one of two things: a reel of the nearest published body for a production run, or a small quantity for a repair line that has to match an existing board. Both are answerable, and both depend on which body the board can accept. The obsolete part cross reference hub is the page to start from when the string on the drawing no longer exists, and the pin to pin cross reference page covers the case where the body has to stay identical.

What to send with an enquiry

Send the line from the bill of materials as it is written, including the body suffix, the quantity per build and the date the line is needed. Add a photograph of the footprint if the board is already laid out, because the lead pitch decides whether the SOP body drops in or a TSSOP adapter is needed. With those three items a quote can name a published body rather than a string that no longer exists, and lead time can be checked against the reel size the line actually needs. Our component lead time solutions page explains how a 2000 piece reel and a 25 piece tube are scheduled differently.