Contact Us
  • Home
  • COMPONENTS
  • Wi-Fi and Bluetooth Modules for Industrial IoT Devices

Wi-Fi and Bluetooth Modules for Industrial IoT Devices

A Wi-Fi module puts the radio, the matching network, the crystal and the antenna on a certified board, so the product only needs a 3.3 V rail and a serial or SDIO port. Flash and PSRAM decide which part fits: 4 MB carries a sensor sketch, 8 MB to 16 MB carries an over the air image plus a display buffer. Peak transmit current reaches 379 mA on the dual core part at 19.5 dBm, which sets the bulk capacitor on a coin cell or solar product. The ESP32-S3 and ESP32-C3 families add BLE 5 and a native USB port, and the C3 moves to a RISC-V core at a lower active current. Every row lists core, memory, antenna and footprint, because those decide the firmware image and the enclosure opening.
quote now

Product Specifications

Product Overview

A Wi-Fi module is the shortest route from a sensor board to a connected product. The module carries the 2.4 GHz radio, the matching network, the crystal, the flash and the antenna on a board that already holds the modular approvals, so the product team does not run an RF layout, an impedance match or an antenna clearance review. What is left is a 3.3 V rail with enough bulk capacitance, a serial or SDIO connection to the host, and an opening in the enclosure that does not detune the antenna.

The family choice is a memory and core choice. The ESP32-WROOM-32E carries a dual core Xtensa LX6 at up to 240 MHz, 802.11b/g/n and Bluetooth 4.2 in both classic and low energy modes, and 4 MB, 8 MB or 16 MB of flash with an optional 2 MB of PSRAM. That is enough for a gateway that terminates a display, a TLS session and a local web server. The ESP32-C3-MINI-1 moves to a single RISC-V core with 4 MB of flash and 15 usable pins, which suits a sensor node that reports over MQTT and sleeps between reports.

The ESP32-S3 family sits between them and is the part to pick when the product needs a camera, a display or a voice front end. The LX7 dual core adds vector instructions for signal work, the module offers up to 16 MB of flash and 8 MB of PSRAM in the WROOM-1 size, and the radio adds Bluetooth 5 with long range coding. The S3-MINI-1 version fits the same silicon into a 15.4 x 20.5 mm board with 39 usable pins, which is the version used when the enclosure is small and the pin count is high.

Peak current is the number that decides the power stage. The WROOM-32E draws 239 mA average and 379 mA peak while transmitting 802.11b at 19.5 dBm, and 112 mA to 118 mA while receiving. The S3 parts draw 330 mA peak at 20.5 dBm and 97 mA in receive. On a mains product those numbers only size the regulator; on a battery or solar product they size the bulk capacitor, because a 379 mA burst out of a coin cell will pull the rail below the brownout threshold unless a capacitor close to the module supply pin supplies the burst.

The antenna arrangement decides the mechanical work. A module with a PCB antenna needs a keep out area under and around the antenna, and any copper, battery or metal that enters that area shifts the resonance and costs range. A module with a U connector, marked by a U in the code such as the WROOM-32UE or the S3-MINI-1U, takes an external antenna through a short coax tail, which is the route for a metal enclosure. Both versions are certified as modules, but the certification covers the antenna type that was tested, so a product that changes from PCB to external antenna needs the module approval that covers both.

The tables below list the parts we quote most often for gateways, sensor nodes and handheld instruments. Core, memory, supply, current and footprint come from the maker data sheet for each order code.

Key Specifications

ParameterESP32-WROOM-32EESP32-S3-WROOM-1ESP32-S3-MINI-1ESP32-C3-MINI-1
CoreDual core Xtensa LX6, up to 240 MHzDual core Xtensa LX7, up to 240 MHzDual core Xtensa LX7, up to 240 MHzSingle core RISC-V, up to 160 MHz
Radio802.11b/g/n 2.4 GHz, Bluetooth 4.2 classic and LE802.11b/g/n 2.4 GHz, Bluetooth 5 LE with long range802.11b/g/n 2.4 GHz, Bluetooth 5 LE802.11b/g/n 2.4 GHz, Bluetooth 5 LE
Flash4 MB, 8 MB or 16 MB quad SPIUp to 16 MB quad SPIUp to 8 MB quad SPI4 MB in package
PSRAM2 MB option on the R2 codesUp to 8 MB option on the R8 codes2 MB option on the N4R2 codeNone
Supply voltage3.0 V to 3.6 V3.0 V to 3.6 V3.0 V to 3.6 V2.7 V to 3.6 V
Transmit current239 mA average, 379 mA peak at 19.5 dBm330 mA peak at 20.5 dBm330 mA peak at 20.5 dBmLower peak, single core radio
Receive current112 mA at 20 MHz, 118 mA at 40 MHz97 mA on 20 MHz HT2097 mA on 20 MHz HT20Lower than the dual core parts
AntennaPCB antenna, U code for external connectorPCB antenna, 1U code for external connectorPCB antenna, 1U code for external connectorPCB antenna, 1U code for external connector
Footprint18.0 x 25.5 x 3.1 mm18.0 x 25.5 x 3.1 mm15.4 x 20.5 x 2.4 mm13.2 x 16.6 x 2.4 mm
Temperature-40 C to +85 C, H codes to +105 C-40 C to +85 C, high temperature codes to +105 C-40 C to +85 C-40 C to +85 C

Included Models and Order Codes

The order codes below are the ones we quote most often. The letters after the family name carry the memory and the antenna: N4, N8 and N16 are flash sizes, R2 and R8 add PSRAM, U and 1U mean an external antenna connector, and H marks the 105 C grade. Where a figure is not published for that exact code the cell is left empty rather than copied from a sister part.

Part NumberRadioCoreFlash and PSRAMSupplyAntennaFootprint
ESP32-WROOM-32E-N4Wi-Fi b/g/n, Bluetooth 4.2Dual core LX64 MB flash3.0 V to 3.6 VPCB antenna18.0 x 25.5 x 3.1 mm
ESP32-WROOM-32E-N8Wi-Fi b/g/n, Bluetooth 4.2Dual core LX68 MB flash3.0 V to 3.6 VPCB antenna18.0 x 25.5 x 3.1 mm
ESP32-WROOM-32E-N16Wi-Fi b/g/n, Bluetooth 4.2Dual core LX616 MB flash3.0 V to 3.6 VPCB antenna18.0 x 25.5 x 3.1 mm
ESP32-WROOM-32E-N8R2Wi-Fi b/g/n, Bluetooth 4.2Dual core LX68 MB flash, 2 MB PSRAM3.0 V to 3.6 VPCB antenna18.0 x 25.5 x 3.1 mm
ESP32-WROOM-32UE-N8Wi-Fi b/g/n, Bluetooth 4.2Dual core LX68 MB flash3.0 V to 3.6 VExternal via connector18.0 x 19.2 x 3.2 mm
ESP32-S3-WROOM-1-N8Wi-Fi b/g/n, Bluetooth 5 LEDual core LX78 MB flash3.0 V to 3.6 VPCB antenna18.0 x 25.5 x 3.1 mm
ESP32-S3-WROOM-1-N16R8Wi-Fi b/g/n, Bluetooth 5 LEDual core LX716 MB flash, 8 MB PSRAM3.0 V to 3.6 VPCB antenna18.0 x 25.5 x 3.1 mm
ESP32-S3-MINI-1-N8Wi-Fi b/g/n, Bluetooth 5 LEDual core LX78 MB flash3.0 V to 3.6 VPCB antenna15.4 x 20.5 x 2.4 mm
ESP32-C3-MINI-1-N4Wi-Fi b/g/n, Bluetooth 5 LESingle core RISC-V4 MB flash2.7 V to 3.6 VPCB antenna13.2 x 16.6 x 2.4 mm
ESP32-C3-MINI-1U-N4Wi-Fi b/g/n, Bluetooth 5 LESingle core RISC-V4 MB flash2.7 V to 3.6 VExternal via connector13.2 x 16.6 x 2.4 mm

Key Features

Radio, match and antenna already on the module – the module carries the balun, the matching network and the antenna, so the product board needs no RF layout and no antenna clearance study.

Memory codes that match the firmware image – 4 MB carries a sensor application, 8 MB carries an image plus a display buffer, and 16 MB with PSRAM carries a camera frame and an over the air update slot.

Peak current stated for the power stage – 379 mA peak on the dual core part at 19.5 dBm is the figure that sizes the bulk capacitor, not the average current in the data sheet summary.

External antenna option in the same footprint – the U and 1U codes keep the pinout and add a connector, so a metal enclosure can be served without a new board.

RISC-V option at a lower active current – the C3 single core part draws less in receive than the dual core LX6 parts, which matters on a solar or coin cell node.

Native USB on the S3 and C3 families – the S3 and C3 parts bring out a USB port directly from the chip, which removes the bridge chip from a configuration or debug interface.

105 C grade available – the H codes on the WROOM-32E and the high temperature codes on the S3 are quoted for products that sit near a power stage.

Applications

These modules are quoted for products that need a local radio link, typically where:

Sensor nodes and meters – a node that reports every few minutes sleeps between reports, so the active current and the sleep current matter more than the peak rate.

Gateways and bridges – a gateway that terminates a local web interface and forwards to a cellular modem needs the memory to hold two images and a TLS session.

Handheld instruments and cameras – a device with a display or a camera needs PSRAM for the frame buffer, and the S3 parts carry 8 MB of it in the module.

The module sits on the same board as the sensor front end and the power stage, so it is quoted with the SUPERB PCB and the SUPERB PCBA build for that board.

Sourcing and Cross-Reference

Selection starts with the firmware image. A sensor application with no display fits in 4 MB, a product with a web interface and a bootloader plus a second slot needs 8 MB, and a camera or voice product needs 16 MB of flash and PSRAM for the frame buffer. The second check is the pin count: a product that drives a display, a keypad and three sensors runs out of the 15 pins on the C3-MINI-1 and needs the 39 pins on the S3-MINI-1 or the 38 pins on the WROOM parts.

The power side is checked next. A mains product only needs a regulator that holds 500 mA; a battery product needs a bulk capacitor within a few millimetres of the module supply pin, and it needs the deep sleep current of the module, which is a few microamps, not the transmit current. The third check is the enclosure: a PCB antenna needs a keep out area with no copper or metal, and a metal box needs the U version and an antenna mounted outside it.

Where a module is out of stock or replaced, the swap is checked on pinout, memory, antenna type and certification at once, because a part with the same radio but a different flash map will not accept the existing image. The route for obsolete and last time buy parts is on our source obsolete components page, and the memory comparison is on pin to pin cross reference. Related families are listed under MCU and embedded processors and multi function ICs.

For volume builds, SUPERB Assembly support covers the module footprint, the bulk capacitor at the supply pin, the antenna keep out and the shielding over the radio section.

Q: Can you quote ESP32-WROOM-32E-N8 and confirm whether the U version keeps the same pinout for an external antenna?

A: Yes. Send the firmware image size, the pin count and the enclosure material, and the SUPERB Tech team will confirm the memory code, the antenna version and the peak current from the maker data sheet before quoting.

Why Buyers Source Wi-Fi Modules Through SUPERB

  1. Memory code matched to the image: flash and PSRAM are quoted against the firmware and the display buffer, so the product does not ship with a module that cannot hold the second slot.
  2. Antenna version quoted with the enclosure: PCB and external antenna codes are compared on the same pinout, because a metal housing changes which version can be used.
  3. Peak and sleep current both given: the transmit peak sizes the capacitor and the sleep current sizes the battery, and a quote that gives only one of them is not enough.
  4. Order code confirmed against the maker data sheet: the suffix carries memory, antenna, temperature grade and packaging, and the module approval only covers the antenna type that was tested.

Related Product Families

This page is part of the component range we supply for industrial, telecom, medical and defence builds. Continue with: Bluetooth low energy SoCs, GNSS receiver modules, LTE Cat 1 and Cat 4 modules, temperature and humidity sensors.