STM32F217VET6
Product Specifications
STM32F217VET6
ST — MCU & Embedded Processors
Product Overview
The STM32F217VET6 from ST is a microcontroller / embedded processor engineered for real-time control, signal processing, and connectivity. STMicroelectronics is a European semiconductor leader with a strong portfolio in MCUs, power management, sensors, and analog ICs.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- ARM Cortex / RISC-V / proprietary core with high-performance real-time processing
- Integrated flash memory and SRAM for efficient code execution
- Rich peripheral set: UART, SPI, I2C, ADC, timers, PWM
- Low-power modes for battery-operated and energy-sensitive applications
- Hardware security features: secure boot, crypto accelerator, TRNG
- Extensive development ecosystem with IDE, HAL, and RTOS support
Key Specifications
| Core | — |
| Max Frequency | MHz |
| Flash | KB |
| SRAM | KB |
| GPIO | — |
| ADC | bits |
| Interfaces | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
STM32F217VET6: 512 Kbyte, LQFP100 body
STM32F217VET6 is a member of the STM32F215 and STM32F217 performance line with cryptographic acceleration described by DocID17050 Rev 13. The order code fixes 512 Kbytes of Flash, 128 Kbytes of SRAM, the LQFP100 body at 14 x 14 mm with 100 pins, 82 general purpose I/O and 16 external channels on each of the 12 bit converters, and the core runs at up to 120 MHz from a 1.8 to 3.6 V supply.
Order code and memory
| Order code | STM32F217VET6 |
| Program Flash | 512 Kbytes |
| SRAM | 128 Kbytes |
| Package | LQFP100, 14 x 14 mm, 100 pins |
| Maximum general purpose I/O | 82 |
| Analog input channels | 16 external channels per converter |
| Digital to analog converter | not present |
| External memory controller | bank 1 or bank 2 only on this 100 pin body, bank 1 multiplexed NOR or PSRAM on NE1, bank 2 a 16 or 8 bit NAND on NCE2, no interrupt line because port G is not bonded |
| Supply voltage | 1.8 to 3.6 V |
| Maximum CPU clock | 120 MHz |
| Temperature grade | suffix 6, minus 40 to plus 85 C ambient, 105 C junction |
| Datasheet | DocID17050 Rev 13 |
Peripheral and electrical parameters
| Core | ARM Cortex-M3 at up to 120 MHz with the adaptive real time accelerator, 1.25 DMIPS per MHz, 150 DMIPS, a memory protection unit and single cycle multiply and divide |
| Clock sources | 4 to 26 MHz high speed external crystal, 16 MHz factory trimmed internal RC, 32.768 kHz low speed internal and external sources, a main PLL and a separate audio PLL for the I2S blocks |
| Timers | two advanced-control 16 bit timers with complementary outputs and dead time, four full featured general purpose timers of which TIM2 and TIM5 are 32 bit, six further general purpose 16 bit timers, two basic timers, the independent and window watchdogs, the SysTick counter and the RTC, which is the seventeen the cover counts |
| Serial interfaces | three SPI blocks two of which mux to I2S, three I2C blocks, four USARTs and two UARTs, two CAN 2.0B active controllers and one SDIO interface |
| DMA | two DMA controllers with eight streams each and a FIFO per stream, sixteen streams in total, with circular buffer support |
| ADC | three 12 bit successive approximation converters with a 0.5 microsecond conversion time, each sharing up to 16 external channels, up to 24 channels across the three on the larger bodies and up to 6 Msps in triple interleaved mode |
| DAC | two 12 bit channels with output buffers |
| Ethernet | 10/100 MAC with dedicated DMA, MII or RMII, IEEE 1588 timestamping |
| Camera interface | parallel camera interface present in the line, but the usable data width on this body follows the pin table and is limited to the low byte |
| Cryptographic acceleration | AES 128, 192 and 256 bit, Triple DES and a HASH unit for MD5 and SHA-1, plus an analog true random number generator |
| Programmable voltage detector | programmable voltage detector with selectable thresholds, plus power on reset, power down reset and brownout reset |
| Debug port | serial wire debug and JTAG, with the trace port sharing low order port bits |
| Backup domain | the VBAT domain keeps the RTC, the 4 Kbytes of backup SRAM and the backup registers alive with the main rail off |
| Flash endurance and retention | 10 kcycles at minus 40 to plus 85 C and 1 kcycle at 105 C, with 30 years of retention at 85 C after one kcycle, 20 years at 55 C after 10 kcycles and 10 years at 105 C |
| Thermal resistance junction to ambient | 46 C/W on this package |
| Input tolerance | almost all inputs 5 V tolerant, with fast I/O toggling to 60 MHz on the larger bodies |
| USB | one OTG full speed port on the device pins and one OTG high speed port that needs an external ULPI PHY |
| Status | production data per the datasheet cover |
Points to check before this part goes on a BOM
This is the entry point to the STM32F217 line in the 100 pin body: 512 Kbytes of Flash with the full 128 Kbytes of SRAM, the MAC with IEEE 1588, the cryptographic block and the random number generator. Everything except the Flash size matches the 1 Mbyte code, so the two form a natural pair for second sourcing.
The SRAM being the full 128 Kbytes at the smaller Flash density is what makes the substitution practical. A TLS session needs buffers on both sides of the cipher and a receive queue for the MAC, and those depend on SRAM. Substituting down to this part costs code space, not memory headroom.
Five hundred and twelve Kbytes holds a protocol stack, a TLS library with two cipher suites and a certificate store, but not a dual image update with a full second copy. On equipment that must be updated remotely, the update path on this density is a compressed image in a reserved region, and the Flash budget has to be planned before the library choices are frozen.
The 100 pin body gives one MAC, two CAN channels, three USARTs, two UARTs, three I2C blocks and two SPI blocks, with RMII as the practical Ethernet interface. Pin collisions between MII, the memory controller and the low byte camera interface are the same as on the rest of this package, and the pin table is the document that decides the product feature list.
The device runs from 1.8 to 3.6 V, and the cryptographic block, the MAC and the USB transceiver all prefer the upper end of that range for timing margin. A board that runs the part from a 2.0 V rail to save power should check the maximum frequency allowed at that voltage in the datasheet table rather than assuming 120 MHz.
Where this order code fits
It is the 512 Kbyte version of the secure 100 pin part, for gateways whose firmware fits in half a megabyte and whose cost target rules out the 1 Mbyte code. Boards comparing it against a neighbouring memory size or pin count start from our MCU Cross Reference page, and boards replacing a line that has gone end of life start from the Pin to Pin Cross Reference page. Both list the figures that have to match before a substitute goes on a BOM.
Questions buyers ask
What is the difference from STM32F217VGT6? Flash only, 512 Kbytes against 1 Mbyte. SRAM, package, pinout, Ethernet, cryptographic block and temperature grades are identical, so a firmware that fits runs on either.
Is the random number generator suitable for key generation? It is an analog true random number generator intended to seed key material, and it is used together with the AES and HASH blocks. For production keys, the entropy source and the key injection procedure are separate security decisions that belong to the key management plan.
Can this part run from a 2.0 V supply at full speed? Not at 120 MHz. The datasheet gives a maximum frequency that depends on the supply voltage, and the full clock needs the upper part of the 1.8 to 3.6 V range. The voltage and frequency table in the datasheet gives the allowed point.
SUPERB holds and sources ST microcontroller lines including this order code for production and repair demand, quoted against the exact ordering string with date codes and packing stated. When a line is changing, the BOM Shortage Recovery page sets out the checks that keep a substitute from failing on the bench.