Contact Us

VBA4309

Brand: VBsemi
VBsemi VBA4309 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

VBA4309 — Discrete & Power Semiconductors | Superb Automation

VBA4309

VBsemi — Discrete & Power Semiconductors

Product Overview

The VBA4309 from VBsemi is a discrete power semiconductor delivering efficient switching and power conversion. VBsemi specializes in discrete MOSFETs, power transistors, and protection devices at competitive cost for power supplies, motor control, and consumer electronics.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

VBA4309: two minus 30 V P channels at 7 milliohm for high side switching

The VBA4309 is a dual P channel MOSFET in the SO-8 body, printed at minus 30 V drain to source and plus or minus 25 V on the gate, halogen free and carrying 100 per cent gate resistance and unclamped inductive switching testing. Each leg is 7 milliohm at a minus 10 V gate with 10 A flowing and 11.5 milliohm at minus 4.5 V with 8 A flowing, and the typical gate charge is 29.5 nC at the 4.5 V point or 57 nC at 10 V. Continuous drain current is 13.5 A with the case at 25 C, 11.9 A at 70 C, 10.9 A at a 25 C ambient and 8.6 A at 70 C, with a 50 A pulsed rating. The vendor lists load switch and notebook adaptor switch, which is where a low resistance P channel pair belongs.

Two P channels in one body is a different proposition from two N channels, because each leg can sit in the positive rail with no charge pump and no bootstrap. On a 19 V or 20 V adaptor input, a P channel pair gives a main switch and a battery switch in one placement, both driven by pulling the gate below the source. The 7 milliohm die is large for the body: 2550 pF of input capacitance, 455 pF of output capacitance and 390 pF of reverse transfer capacitance, with 22 nC of gate to drain charge. That reverse transfer capacitance is high and is the row to watch when the drain node is inductive, because it couples the drain edge back into the gate and stretches the Miller plateau.

The ratings a buyer checks first

Drain to source voltageminus 30 V
Gate to source voltageplus or minus 25 V
On resistance at minus 10 V gate, 10 A7 milliohm
On resistance at minus 4.5 V gate, 8 A11.5 milliohm
Continuous drain current13.5 A at 25 C case, 11.9 A at 70 C case
Continuous drain current in still air10.9 A at 25 C ambient, 8.6 A at 70 C ambient
Pulsed drain current50 A
Continuous source to drain diode current4.1 A at 25 C case, 2.2 A in still air
Single pulse avalanche energy20 mJ, avalanche current 20 A into 0.1 mH
Power dissipation5.0 W at 25 C case, 2.7 W at 25 C ambient
Junction to ambient, junction to foot38 and 20 C per watt typical, 46 and 25 maximum
Gate threshold voltageminus 1.4 V minimum, minus 2.5 V maximum
Total gate charge at minus 10 V and minus 4.5 V57 nC and 29.5 nC typical
Input, output and reverse transfer capacitance2550, 455 and 390 pF
Body diode forward voltage at 3 Aminus 0.75 V typical, minus 1.2 V maximum
Junction and storage rangeminus 55 to plus 150 C

Gate drive on a P channel pair

The threshold window is minus 1.4 V to minus 2.5 V at 250 microamp, which is a wide window in absolute terms and means a 4.5 V drive gives 2 V of overdrive on the worst case die. The switching rows show how much the drive voltage costs: at minus 10 V the turn on delay is 13 ns, rise 12 ns, turn off delay 40 ns and fall 9 ns, while at minus 4.5 V the same rows are 48, 92, 34 and 19 ns. A 92 ns rise is slow, and on a 19 V rail with a capacitive load that is a deliberate inrush limiting behaviour; in a switching converter it is a loss. The 25 V gate rating is generous for a 30 V part, which matters because on a 19 V rail the gate has to swing to about 10 V below the source and any ringing then sits well inside the limit.

Gate charge of 29.5 nC at 4.5 V and 86 nC maximum at 10 V is a real load for a P channel driver. A 10 k pull up resistor from gate to source turns the part off in about 26 microseconds at the typ point and much longer at the maximum charge, which is fine for a load switch and a problem for a converter that switches every 2 microseconds. A small N channel pull down driven by the controller is the usual answer, and the 390 pF reverse transfer capacitance means the pull down has to sink the Miller current during the drain transition rather than just the gate charge. That is the difference between a clean edge and a slow one that heats the die.

Thermal data is generous for a P channel of this size. Junction to foot is 20 C per watt typical, so at 10 A and 7 milliohm the die loses 0.7 W and the junction sits 14 C above the tab. Junction to ambient is 38 C per watt on a 10 second pulse and 46 C per watt maximum, so the same loss puts the junction 32 C above ambient in still air, which is why the vendor prints 10.9 A at a 25 C ambient. A pair of legs sharing the lead frame has to count both losses: 10 A through both legs is 1.4 W and a 53 C rise in still air, which in a 60 C box reaches 113 C and leaves little margin.

Adaptor and battery switching

A notebook adaptor switch is the textbook case: a 19 V adaptor on one leg and a battery on the other, with the pair selecting which source feeds the system. The 7 milliohm die keeps the drop at 70 mV for 10 A, well inside the 30 V rating with margin for the adaptor transient, and the 25 V gate rating allows a 15 V clamp without a large margin loss. The 20 mJ avalanche rating with a 20 A pulse covers the inductive kick from a long adaptor cable when the switch opens, which is the event that kills P channels in this role. Two legs in one body also mean one thermal path, so a product that runs on the adaptor most of the time heats only the leg that is on.

The second use is a battery disconnect in a portable product, where the P channel sits in the positive lead and the gate is pulled low by a resistor to switch on. The 50 A pulsed current covers the inrush into the system capacitance, and the minus 1.4 V minimum threshold means a 3.3 V logic pin can switch the part through a small N channel pull down without a level shifter. The third use is reverse polarity protection on a 24 V industrial input, where two legs in parallel give 3.5 milliohm and the body diode carries the reverse condition at 4.1 A with a 0.75 V drop, which is 3 W and beyond the package in still air, so the diode is a transient path only.

Sourcing notes and the second source question

Dual P channel at 7 milliohm in SO-8 is a small club, and the parts that match the resistance differ widely in gate charge, which is the number that decides whether an existing pull down network still works. Our pin to pin cross reference compares each leg separately and lists the gate charge and reverse transfer capacitance beside the resistance. For products that are already qualified, the lifecycle route in component obsolescence management is the one that keeps a P channel pair from disappearing mid programme, because these bodies are trimmed from portfolios faster than N channels of the same voltage.

Date code control matters on a large die, because a change of die in the same body moves the gate charge and the threshold window, and a pull down resistor chosen for one lot can be marginal on the next. The controls in date code management cover the reservation and the traceability we hold for each shipment, and the incoming record includes an on resistance sample at both gate voltages plus a threshold check at 250 microamp.

Questions we answer before a reel is booked

Buyers ask whether 13.5 A is available on a two layer board. It is a 25 C case figure, and the ambient derating gives 10.9 A at 25 C air with the junction at 150 C, so the practical continuous current in a 60 C box is nearer 7 A per leg, and less where both legs run at once. The second question is whether the body diode can carry the load in a reverse battery condition. At 4.1 A the drop is 0.75 V, which is 3 W, so the answer is that it survives a short event and not a sustained one, and a series fuse or a Schottky is the usual protection.

On the gate, buyers ask whether the 25 V rating allows a direct drive from a 19 V rail. It allows a clamp at 15 V, and the pull down device has to be rated for the full rail plus the cable transient. A direct connection with no clamp puts the gate at the rail and leaves the part off, which is a common mistake on a P channel used as a load switch. The other question is about the 20 mJ avalanche rating, which is one pulse into 0.1 mH; a repeated event derates with temperature and needs a clamp.

On supply, we quote the reel and the date code from the packing list, hold the incoming records per lot, and can supply both legs from one date code so a paralleled pair shares current. Where a customer needs the capacitance curve set for a snubber, we request it against the order rather than quoting a figure the document does not print.