Contact Us

HXN50209

Brand: Hisiwell
Hisiwell HXN50209 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXN50209 — Discrete & Power Semiconductors | Superb Automation

HXN50209

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXN50209 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXN50209: fifteen watts of saturation across a gigahertz and a half at 4.4 to 5.9 GHz

The HXN50209 is an unmatched gallium nitride power transistor from Hisiwell on a 28 V rail, filed in the 4.4 to 5.9 GHz window. Three output figures sit on the index row: 15 W of saturation, 25 W of peak and 2 W of average. Power gain is 15 dB and drain efficiency 26 per cent. The mode column does not carry a mode word at all, it carries a frequency range of 5.7 to 5.9 GHz, and that is the first row to settle with the factory before a schedule is set.

Fifteen watts of saturation is 41.76 dBm by calculation and 25 W of peak is 43.98 dBm, a gap of 2.22 dB. That gap is small for a part that also quotes an average column, and it says something useful: the 25 W row is barely a peak figure, so the envelope headroom on this part comes mostly from the 2 W average row rather than from the 2.22 dB between saturation and peak. Average sits at 33.01 dBm, which is 10.97 dB below peak.

The band is 1.5 GHz wide. At a centre of 5.15 GHz that is 29.1 per cent fractional bandwidth, and on a 28 V device with no internal matching it is the widest window in this shelf. The price of the width is efficiency. Twenty six per cent is low next to the 55 per cent of the 4.4 to 6 GHz pair on the same index page, and the difference is in the match loss across a band that broad rather than in the die.

With 15 dB of gain the drive at saturation is 0.47 W, which is 26.76 dBm. A single stage driver reaches that on its own, so the line up in front of this part is two stages and not three. At the average point the drive falls to about 0.03 W, which is a level the same driver holds without a pad.

The package is not on the index row and neither is the thermal resistance. What is known is the arithmetic: at 15 W and 26 per cent the drain takes 57.7 W and the part leaves 42.7 W of heat for the copper to carry. For a 4 W class body that is a board question long before it is a device question.

The parameter rows behind the HXN50209

Part classGallium nitride HEMT power transistor, unmatched
Frequency range4.4 to 5.9 GHz
Band width, calculated1,500 MHz
Fractional bandwidth at 5.15 GHz centre, calculated29.1 per cent
Saturation output, index row15 W
Saturation in dBm, calculated41.76 dBm
Peak output, index row25 W
Peak in dBm, calculated43.98 dBm
Average output, index row2 W
Average in dBm, calculated33.01 dBm
Peak over saturation, calculated2.22 dB
Peak over average, calculated10.97 dB
Power gain15 dB
Gain as a ratio, calculated31.6 times
Drive at saturation, calculated0.47 W, 26.76 dBm
Drain efficiency26 per cent
DC input at saturation and 26 per cent, calculated57.7 W
Drain current at saturation, calculated2.06 A at 28 V
Heat at saturation, calculated42.7 W
DC input at peak and 26 per cent, calculated96.2 W, 3.43 A, 71.2 W of heat
DC input at average and 26 per cent, calculated7.7 W, 0.27 A, 5.7 W of heat
Drain rail28 V
Mode column as printed5.7-5.9 GHz, a frequency range where the mode word belongs
Load voltage at 50 ohm, calculated27.4 V RMS, 38.7 V peak at 15 W
Load voltage under a two to one mismatch, calculated54.7 V peak
Output per gigahertz of band, calculated10.0 W per GHz
MatchingUnmatched, network on the customer board
Package and bodyNot published on the index row
Thermal resistance, junction to caseNot published
Gate bias point and quiescent currentNot published
Pulse width and duty cycle limitsNot published

Two amps at saturation and three and a half at peak

The two operating points do different work. At saturation the drain draws 2.06 A and the part leaves 42.7 W of heat. At the peak row it draws 3.43 A and leaves 71.2 W. Neither of those numbers sizes the sink on a modulated signal, because the average point draws 0.27 A and leaves 5.7 W, and the sink follows the average while the device follows the crest.

That split is why a 15 W part can look oversized in a DC budget and undersized in a thermal one on the same afternoon. A 42.7 W continuous dissipation needs a copper coin or a flange and a via field that survives the reflow. A 5.7 W average needs a modest spreader. The same part is doing both jobs and the two requirements are met by different parts of the assembly.

Two point one amps on a 28 V rail is a 150 mil trace at one ounce copper, and the choke behind it needs a saturation rating above 4 A to cover the peak row. The bulk bank is sized on the envelope at the crest, not on the average current, which is what the 3.43 A figure describes.

At the output the 27.4 V RMS and 38.7 V peak at 50 ohm are comfortable for 100 V capacitors. Under a two to one mismatch the peak reaches 54.7 V, which is still inside that rating with margin. That makes the match on this part cheaper than on the 50 W members of the same shelf, where the peak already sits at 70.7 V before any mismatch.

HXN50209 against the rest of the 5 GHz shelf

HXN502094.4 to 5.9 GHz15 W saturation, 25 W peak, 2 W average15 dB26 per centReference point
HXN503344.4 to 5.9 GHz25 W peak, 4 W average12 dB25 per cent2.22 dB more peak, twice the average, 3 dB less gain
HX2580258GX5.2 to 5.9 GHz25 W peak, 4 W average12 dB25 per centSame power on a narrower window
HX446030F24.4 to 6 GHz30 W saturation14 dB55 per cent3.01 dB more output, half the heat per watt
HXN502145 to 6 GHz50 W peakNot publishedNot published5.23 dB more peak on a narrower window
HX5060140P25 to 6 GHz140 W saturation11 dB50 per cent9.70 dB more output, needs 11 W of drive

The first comparison is the one that matters, because the HXN50334 sits on exactly the same band. It trades 2.22 dB of peak for twice the average and 3 dB less gain. A system that runs a modulated carrier with a high crest factor wants the average row and takes the HXN50334. A system that runs near saturation on a continuous carrier wants the gain and the cleaner peak margin and takes the HXN50209.

The efficiency row cannot be compared across this table without care. Twenty six and 25 per cent are close, but the 55 per cent of the HX446030F2 is a saturation figure and the 26 per cent here is most likely an average point figure, since a 28 V GaN device at saturation at 5.5 GHz usually lands between 45 and 60 per cent. The page prints both as the vendor prints them and does not rank them.

The whole 5 GHz region is on the RF power transistor cross reference, which is the page to use when the efficiency figures have to be lined up with a note of the operating point, and RF component sourcing covers how a measured set of curves is requested with the order.

Board notes for a fifteen watt stage at five and a half gigahertz

The operating point question comes first. A part with three power columns and one efficiency column has to be read with the factory before a sink is sized, and the mode column that carries a frequency range rather than a mode word is a second question for the same message.

The match is the second item. A 29.1 per cent window at 5.5 GHz is not carried by a single section ladder on a standard laminate. The usual build is a two section network on a low loss material with a defined dielectric constant, and the stack is fixed before the first tuning pass, because changing the material afterwards moves the match more than the network can absorb.

The third item is the bias. No gate voltage and no quiescent current is published. For a continuous carrier the point is set for gain and for a modulated one it is set for linearity, and the two are not the same setting. A temperature compensated network keeps the point where it was set over the case temperature range.

The fourth item is identification. No package is stated on the index row, so a purchase order should carry the part number, the band and the power, and a sample should be measured at 4.4, 5.15 and 5.9 GHz before a reel is released to the line.

Questions buyers ask about HXN50209

Is 25 W the continuous rating? No. The index row carries 15 W of saturation, 25 W of peak and 2 W of average. The 25 W figure is a peak column and the continuous case is closer to the 15 W row.

Why is the mode column a frequency range? Because the vendor filled it with 5.7 to 5.9 GHz rather than a mode word. It may mean the part is specified for continuous wave only inside that narrower window, and it may be a clerical entry. It is quoted as unconfirmed and settled in writing.

What is the efficiency at the average point? Not published separately. Twenty six per cent is the only figure, and the DC budget at the average point in this page is calculated from it.

Can it run at 6 GHz? The row stops at 5.9 GHz, so 6 GHz is outside the stated window. A 6 GHz requirement is the HX446030F2 or the HX446050F2, both of which are filed to 6 GHz.

How do we start? Send the band edges, the output at the connector, the signal and its crest factor, the ambient and the rail. We will confirm the operating point and the mode question with the factory, quote from the schedule and ship a sample measured at 4.4, 5.15 and 5.9 GHz.