HXN50162x2
Product Specifications
HXN50162x2
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HXN50162x2 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HXN50162x2: 1500 W that is two devices, not one, and the combiner that follows
The HXN50162x2 is not a transistor. It is a row on the 50 V shelf that describes an amplifier built from two HXN50162 devices to give above 1500 W pulsed output across 1200 to 1400 MHz, and the page says so in one sentence: if you want to duplicate the same arrangement, order HXN50162. Read it as a reference build rather than a part number, and the rest of the row makes sense, including the 16 dB of gain and the 58 per cent efficiency, which are figures for the pair at the combining point and not for a die.
1500 W is 61.76 dBm. Split evenly, each device carries 750 W, which is 58.75 dBm, and the 3.01 dB between the two numbers is the sum of two equal powers. That arithmetic is the first thing a buyer needs, because the devices themselves are the purchase and the combiner is the buyer's problem: a 1500 W combiner that holds balance across 200 MHz and survives a mismatch is a real piece of engineering, not a connector.
The window is narrow, 200 MHz wide, and the mode is pulse. Nothing on the row publishes a pulse width, a duty cycle or a thermal resistance, so the 58 per cent efficiency cannot be turned into a heat figure for a real waveform without a condition from the factory.
The HXN50162x2 rows as the vendor publishes them
| Part class | Reference amplifier row, two HXN50162 devices |
| Frequency range, index row | 1.2 to 1.4 GHz |
| Window width, calculated | 200 MHz |
| Band ratio, calculated | 1.17 to 1 |
| Saturation output, index row | 1500 W, 61.76 dBm |
| Per device, calculated | 750 W, 58.75 dBm |
| Sum of two equal devices, calculated | 3.01 dB |
| Output per megahertz of window, calculated | 7.5 W |
| Gain, index row | 16 dB |
| Drive level at 16 dB, calculated | 37.68 W, 45.76 dBm |
| Drain efficiency, index row | 58 per cent |
| DC input at 58 per cent, calculated at continuous duty | 2586 W |
| Drain current at 50 V, calculated at continuous duty | 51.72 A |
| Heat at continuous duty, calculated | 1086 W |
| Drain rail, index row | 50 V |
| Load voltage at 1500 W into 50 ohm, calculated | 273.9 V rms, 387.3 V peak |
| Peak against the rail, calculated | 7.75 times |
| Peak at a 2 to 1 mismatch, calculated | 774.6 V |
| Mode, index row | Pulse |
| Pulse width and duty cycle | Not published |
| Combiner type, loss and balance | Not published |
| Thermal resistance | Not published |
| Package, flange and body | Not published, no image on the page |
| Load impedance and load pull | Not published |
| Data sheet | No document linked, page carries no parameter block |
| Orderable addendum | None published, the page names HXN50162 as the orderable device |
| Packing quantity and moisture level | Not published |
| Applications listed | RF and microwave systems |
What 1500 W does to the output network, and why the pair is the easy part
At 1500 W into 50 ohm the output carries 273.9 V rms and 387.3 V peak, which is 7.75 times a 50 V rail, and at a 2 to 1 mismatch the same node has to hold 774.6 V. That is the figure that decides the output connector, the cable, the circulator rating and the voltage class of every capacitor in the match. Almost no 50 ohm coaxial connector rated for laboratory use is comfortable at 775 V peak with a standing wave, so the amplifier's interface is a constraint on the build in its own right.
The combiner has a similar problem in a different currency. Two 750 W devices have to be summed with low loss and with balance that holds across 200 MHz, because an unbalanced pair puts more than 750 W through one device and the efficiency figure no longer describes the build. A Wilkinson or a hybrid at this power is a machined part with a heat path of its own, and its insertion loss lands directly on the 0.3 dB of margin between 1500 W and the 1600 W that two perfect 750 W devices would give.
The current tells the same story from the supply side. At 58 per cent and continuous duty the pair would draw 51.72 A at 50 V. Even at a 10 per cent duty the average is 5.2 A, and the peak during the pulse is still 51.72 A, so the supply, the bus bars and the decoupling have to be sized for the pulse and not for the average.
The pulse condition is the missing number
Pulse is a mode word, not a condition. A 1500 W figure taken at 100 microseconds and 10 per cent duty describes a die that runs cool between pulses. The same figure at 1 millisecond and 20 per cent describes a much hotter junction and a much shorter life if the thermal path is sized for the first case. Neither document on this row publishes the width, the duty or the thermal resistance, so none of the three can be inferred.
The heat arithmetic shows why it matters. At continuous duty the pair would produce 1086 W of heat, which is a water cooled chassis. At 10 per cent duty the average is 109 W, which a forced air heatsink can move. Both are consistent with the same 1500 W row, and they are not the same amplifier.
For a radar or an industrial pulse application the pulse width and the duty are usually fixed by the system, so the buyer can state them and ask the factory to confirm the rating at that condition. That question, asked before the order, is cheaper than a batch of devices that meet a catalogue figure and fail on the bench.
Where the HXN50162x2 sits on the 50 V shelf
The nearest rows are the other L band pulse parts. The HXN50160F is 800 W over 1200 to 1600 MHz with 16 dB and 60 per cent, which is 2.73 dB below this pair and covers a window twice as wide. The HXN50156x2 is 1500 W over 960 to 1225 MHz with 13 dB and 57 per cent, the same output on a different window and 3 dB less gain, so it needs 75 W of drive instead of 38 W. The HX5141K00VP is a single 1000 W device over 960 to 1400 MHz with 18 dB and 70 per cent, which is 1.76 dB below the pair but arrives as one part number and one flange.
Read as a ladder, the shelf offers 800 W, 1000 W, 1500 W and 1500 W again, and the choice is rarely about the last 1.8 dB. It is about how many devices the customer wants to combine, how much drive is available, and whether the band is 200 MHz wide or 400 MHz wide. The comparison with the drive figure for each row is on the RF power transistor cross reference page.
What an order for the HXN50162x2 has to state, and what it cannot yet
The page names HXN50162 as the orderable device, so a purchase order that quotes HXN50162x2 as a part number will not be met by a shipment of that number. The order has to carry two HXN50162 devices per amplifier, the window, the rail, the pulse width and duty, the flange and body variant, the quantity and the incoming test. It should also state whether the combiner comes from the buyer or is expected with the devices, because the row describes a build and does not sell one.
For the incoming gate, a pair is worth testing as a pair: gain and output on each device, then the combined output and the balance between the two branches. A pair that is fine individually and 1 dB down when combined has a combiner problem rather than a device problem, and that distinction is only visible if both measurements are recorded. The incoming inspection plan page sets out the record, and the consolidated buy for the driver, the circulator and the passives against one date is on the one stop RF supply page.
Questions buyers ask about the HXN50162x2
Can I order HXN50162x2? The page says to order HXN50162. Treat the x2 row as a reference build and put two devices on the order per amplifier.
Is 1500 W available from one device? Not on this shelf. The pair is two 750 W devices summed, and the combiner is the part that has to hold 1500 W with balance across 200 MHz.
What pulse condition applies? Not published. The mode is pulse and the power is a pulse figure with no width and no duty, so the factory has to confirm the condition before the thermal path is closed.
How much drive does it need? 16 dB of gain means 37.68 W at 1500 W output, which is 45.76 dBm. That is a two stage driver in most systems and should be in the power budget from the first draft.