HXC50062
Product Specifications
HXC50062
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HXC50062 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HXC50062: 30 W matched from 700 to 2700 MHz, with no document to check it against
The HXC50062 is a 30 W internally matched LDMOS device filed for cellular base station and ISM work from 700 to 2700 MHz, on a 28 V rail, in pulse. The index row gives it 30 W, 20 dB of gain and 60 per cent efficiency. The product page repeats the description and the applications, and its document link points at the site root and serves nothing, so this row has to be specified from the index table plus arithmetic.
That is a different situation from the row below it on the same shelf, the 15 W HXC50061, whose page links a real document for a 30 W part measured at 1470 to 1530 MHz and 2500 to 2700 MHz. The two rows sit 3.01 dB apart on the index and the documents do not line up with the labels, which is a pattern on this shelf worth naming: the vendor attaches the document it has rather than the one that matches the row, and the buyer has to read both.
What can be said with confidence is the shape of the part. 30 W on 28 V with 20 dB of gain and 60 per cent efficiency is a normal cellular small cell device, and matched at both ports it covers 700 to 2700 MHz only because the match is broadband rather than tuned. The price of a broadband internal match is a lower efficiency than a narrowband part would give, and 60 per cent is consistent with that trade.
The HXC50062 rows as the vendor publishes them
| Part class | LDMOS RF power transistor, internally matched, cellular base station and ISM |
| Output, index row and page | 30 W |
| Output in dBm, calculated | 44.77 dBm |
| Frequency range, page | 700 to 2700 MHz |
| Drain rail, index row | 28 V |
| Mode, index row | Pulse |
| Gain, index row | 20 dB |
| Drain efficiency, index row | 60 per cent |
| Drive at 20 dB, calculated | 0.30 W, or 24.77 dBm |
| Load voltage at 30 W into 50 ohm, calculated | 38.7 V rms, 54.8 V peak |
| Peak against the 28 V rail, calculated | 1.96 times |
| Load voltage at a 2 to 1 mismatch, calculated | 110 V peak |
| Load voltage at a 3 to 1 mismatch, calculated | 164 V peak |
| DC input at 60 per cent, calculated | 50.0 W, 1.79 A at 28 V |
| Heat to remove at 60 per cent, calculated | 20.0 W |
| DC input at 50 per cent, calculated | 60.0 W, 2.14 A at 28 V |
| Heat to remove at 50 per cent, calculated | 30.0 W |
| Thermal resistance, junction to case | Not published for this row |
| Breakdown voltage and capacitance set | Not published for this row |
| Test fixture and board material | Not published for this row |
| Document link on the page | Points at the site root and serves nothing |
| Applications listed on the page | Cellular base station and ISM RF energy |
| Orderable addendum | None published |
| Packing quantity and moisture level | Not published |
What 30 W on 28 V asks of the rail, and what a broadband match costs
30 W into 50 ohm is 38.7 V rms and 54.8 V peak, 1.96 times a 28 V rail. On a matched part at this power the ratio is small enough that the breakdown voltage is not a limiting factor, which is why the missing breakdown figure is less serious here than it would be on a 300 W row. The current is 1.79 A at 60 per cent efficiency, which is a load a small cell radio can feed from its own rail without a separate supply.
The mismatch case reaches 110 V at 2 to 1 and 164 V at 3 to 1. Those are still modest, but on a matched part the external network is minimal, so the parts that see the mismatch are the connector, the isolator and any filter after the stage. An isolator after a 30 W stage costs about 0.4 dB of output and buys protection against a load that moves, which in a small cell product is usually the right trade.
The broadband match is the trade that cannot be seen from outside. Covering 700 to 2700 MHz with an internal network means the match is a compromise at every frequency, and the 60 per cent efficiency is the average of that compromise. A narrowband part at 2.6 GHz would give 5 to 10 points more, which matters if the product is battery powered or fanless.
Thermal: 20 W of heat and a figure that has to be bounded
At 60 per cent efficiency and 30 W the heat is 20 W, and at 50 per cent it is 30 W. With no published thermal resistance, bound it from the shelf: a 10 W part publishes 3 degrees per watt, a 70 W part 0.7, and a 30 W matched part normally sits near 1.0 to 1.5. At 1.2 the rise is 24 degrees, so at an 85 degree case the junction is near 109 degrees against a 225 degree limit. At 2.0 the rise is 40 degrees and the junction near 125 degrees.
Both bounds sit well inside the limit, which means the part is thermally easy and the flange can be small. The risk on a matched part is not the die but the interface: a thin, even interface material and a flat flange are what keep the case at 85 degrees, and on a 20 W part a poor interface is worth 10 degrees rather than 40.
The pulse mode in the index changes the answer again. If the product is pulsed at 10 per cent duty the average heat is 2 W and the junction barely moves, so a heat sink chosen on the continuous case is generous. If the product is continuous the 20 W figure stands, and the bound above is the one to use.
Drive, gain and the band that is wider than the match
20 dB of gain means the drive for 30 W is 0.30 W, or 24.77 dBm, which a single small driver can supply. That is 1 dB more gain than the 15 W row below it and 3 dB more than the 100 W row above it, so this is the gain peak of the 700 to 2700 MHz group.
The band claim is 700 to 2700 MHz, which is 5.9 dB in octave terms and wide for a matched device. A matched network that holds a reasonable return loss across that range will not hold 20 dB of gain at both ends; expect 2 to 3 dB of gain slope from 700 MHz to 2.7 GHz and specify the driver with that slope in mind. The index gives one gain figure with no frequency, so the only honest reading is that 20 dB is a mid band number.
Efficiency follows the same pattern. 60 per cent at 700 MHz and 50 per cent at 2.7 GHz would be normal for a broadband match, and the index figure is likely the middle. A product that runs at the top of the band should be planned on the lower efficiency, which raises the heat from 20 W to 30 W.
Where the HXC50062 sits on the shelf
The group has the 15 W HXC50061 below it, the 100 W part at 1.8 to 2.7 GHz above it, and the 300 W matched part at 700 to 1000 MHz on a different band. In decibels 15 W to 30 W is 3.01 dB and 30 W to 100 W is 5.23 dB. The 100 W part is the only one of the three with a gain figure low enough, 11 dB, to need a real driver.
Read as a choice, this row is the one for a 30 W cellular or ISM socket where a matched broadband part removes the output network, and where the buyer accepts an index-only specification and intends to measure the part on the first build. A buyer who needs a document takes the 2.6 GHz 100 W row and runs it below rating; a buyer who needs 15 W and a document should look at the HXC50061 page, where the document at least exists, even though it describes a 30 W part.
Before the purchase order goes out
Two procurement points. No document is reachable for this row, so request the thermal resistance, the breakdown voltage and the fixture in writing, and the incoming route that handles a part arriving with no published document is on the incoming inspection plan page. Buyers comparing 30 W matched parts across 700 to 2700 MHz should start from the RF power transistor cross reference, where band, gain and package can be lined up before wattage, and the sourcing side of a small cell bill of materials is covered on the RF component sourcing page.