Contact Us

HXN42013

Brand: Hisiwell
Hisiwell HXN42013 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXN42013 — Discrete & Power Semiconductors | Superb Automation

HXN42013

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXN42013 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXN42013: 562 W over 3.1 to 3.5 GHz with no flatness row

The HXN42013 is the largest output in the 3 GHz group and the only member of this batch whose flatness column is blank. It covers 3.1 to 3.5 GHz, 400 MHz wide, and delivers 57.5 dBm at saturation, which is 562.3 W, with 13.5 dB of gain and 55 per cent drain efficiency from a 48 V rail, in 100 microsecond pulses at 10 per cent duty.

At 55 per cent the rail supplies 1022.4 W during the pulse, the drain current is 21.3 A at 48 V, and the heat is 460.1 W. That is a kilowatt class DC load keyed in bursts, and the average at 10 per cent duty is 46 W of dissipation and 2.13 A, which is a modest steady load by comparison.

The 48 V rail is a third voltage in a family that already uses 28, 32 and 50 V. Systems built around 48 V, which is common in telecom and in datacom power shelves, take this part without a supply change; systems built around 50 V can use it but lose the 2 V of headroom that the neighbouring part assumes.

The missing flatness row is the detail that deserves attention. Every other part in the family prints a figure, mostly plus or minus 0.8 dB, and this one prints a slash. The index also shows the part with a 400 MHz window, wider than the 300 MHz members below it, so the absence is not explained by a narrow match. It is simply not published, and a system that needs a flatness number has to ask for it.

The parameter rows Hisiwell publishes for HXN42013

Part classGallium nitride power transistor, internally matched
Frequency range3.1 to 3.5 GHz
Bandwidth, calculated400 MHz, 12 per cent fractional
Saturation output power as published57.5 dBm
Saturation output power in watts, calculated562.3 W
Gain as published13.5 dB
Drain efficiency as published55 per cent
Drain voltage48 V
Flatness across the bandnot published, the index prints a slash
Operating modepulsed, 100 microsecond width at 10 per cent duty
Input impedance50 ohm
Output impedance50 ohm
Output at 1 dB compressionnot published, the index prints a slash
DC input at saturation, calculated1022.4 W
Drain current at saturation, calculated21.30 A at 48 V
Dissipation during the pulse, calculated460.1 W
Average dissipation at 10 per cent duty, calculated46.0 W
Average drain current at 10 per cent duty, calculated2.13 A
Charge drawn per 100 microsecond pulse, calculated2.13 mC
Drive power for the rated output, calculated44 dBm, 25.1 W
Dissipation if efficiency falls to 50 per cent, calculated562.3 W
Output per 100 MHz of the band, calculated140.6 W
Thermal resistance, junction to casenot published
Transient thermal impedancenot published
Package outline and dimensionsnot published in text, one image on the product page
Scattering parametersnot published
Pinch off voltage and gate bias pointnot published on this page
Operating and storage temperaturenot published
Moisture level and floor lifenot published
Orderable addendum and packingnot published
Neighbour at 398 W on a 50 V railHXN40040 over 3.1 to 3.4 GHz
Neighbour at 501 W on the 2.7 to 2.9 GHz bandHXN40038, same 50 V rail, 48 per cent

Twenty one amperes, one kilowatt and a hundred microsecond burst

The supply has to deliver 1022 W for 100 microseconds, which is 102 mJ in every pulse at a 1 kHz repetition, or 102 W of average DC power. The charge drawn is 2.13 mC, so a rail allowed to sag 2 V needs 1.07 mF close to the device and a rail allowed 1 V needs 2.13 mF. At 21.3 A of leading edge current the ESR of the bank, the feed geometry and the flange interface produce the droop, not the capacitance alone.

Twenty one amperes through a flange is a mechanical question before it is an electrical one. The vendor publishes one outline image and no dimension table, so the pin arrangement, the current path and the mounting method have to be established with the vendor before the assembly is frozen. A feed with too much inductance limits the pulse edge before the die does.

The 460 W of pulse heat needs the same treatment. On the average it is 46 W, which a good carrier removes; inside the pulse it is 460 W with no transient curve published, and the junction excursion is the number that decides whether the part survives a production run. At 50 per cent efficiency the pulse heat rises to 562 W and the current to 23.4 A, which is a different class of feed and cooling for the same radio frequency.

The 55 per cent and 13.5 dB rows are printed without typical markers, unlike the members below on the same window, so they read as the published values and any floor has to be asked for in writing.

What a blank flatness column means in practice

Flatness is the row that tells a system builder how much equalisation the chain needs. With a plus or minus 0.8 dB part, a 400 MHz band needs little or nothing; with a part whose flatness is not published, the answer is unknown until the part is measured, and a build that assumes the family norm is taking a risk on the one row where this part differs from its siblings.

There are two plausible readings and both have to be checked. The first is that the parameter exists but was not printed when the table was assembled, in which case the vendor can supply it. The second is that the match was optimised for output and efficiency over the 400 MHz window and the flatness is wider than the family norm, in which case a system with a tight amplitude budget needs to know before it commits.

Because the part is the largest in the group and the widest on that band, it is also the one where a flatness problem costs most: 562 W that varies by 1.5 dB across the band is a different radar than one that varies by 0.8 dB, and the correction has to be done in the driver or in the antenna.

Where a 562 W pulse stage at 3.1 to 3.5 GHz fits

The fit is a high power radar transmitter, a long range instrumentation radar, a satellite ground station final stage or a laboratory load pull amplifier where 562 W is the point of the exercise. The 400 MHz window covers the radar allocations inside 3.1 to 3.5 GHz, and the 13.5 dB gain means a 25.1 W driver, the same as the 398 W member below.

It is a poor fit for a compact assembly, for any continuous wave duty, for a system that needs a published flatness or compression figure, and for a build whose supply cannot hold 48 V under a 1 kW transient. Our RF power transistor cross reference work lists this part against the 398 W member on nearly the same window with the rail and the drive printed, so the step can be priced against the cooling and the supply rather than the dBm.

Where a second source is being considered, the drop in replacement check starts from the flange, the pin positions and the 50 ohm ports, because a 562 W part with a different rail and a different match is not interchangeable with a 501 W part on a 2.7 to 2.9 GHz window even though both are 57 to 57.5 dBm.

Questions we answer on HXN42013 before a lot is booked

The first is the flatness row. It is blank on the index and it is the one number a system with a tight amplitude budget needs in writing.

The second is the flange and the feed at 21.3 A, which decide whether the assembly can be built at all.

The third is the lot. With no addendum, no marking and no moisture level published, the purchase order names the band, the rail, the pulse width and the duty cycle, and the incoming inspection plan records the flange and the DC behaviour of each lot. A saturated power sweep at 3.3 GHz and a case temperature at the rated pulse belong on the customer bench or at a partner RF laboratory, and the RF procurement process states that division before the first order.