Contact Us

HXN40053

Brand: Hisiwell
Hisiwell HXN40053 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXN40053 — Discrete & Power Semiconductors | Superb Automation

HXN40053

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXN40053 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXN40053: a 4.4 to 5.0 GHz internally matched GaN transistor at 53 dBm pulsed

HXN40053 is a GaN on silicon carbide power transistor from Hisiwell with the input and output matching networks already on the package, specified across 4.4 GHz to 5.0 GHz. The vendor table gives 53 dBm of saturated output power, 10 dB of gain, 45 percent drain efficiency, a 28 V drain rail and plus or minus 0.8 dB of flatness, in a 100 microsecond pulse at 10 percent duty. Internally matched means the part arrives at 50 ohm on both ports, so the board does not have to carry a broadband matching network of its own.

The band is the one that covers the 4.4 GHz to 5.0 GHz radar and data link allocations, and the power class is the one that sits behind a driver stage rather than at the antenna. 53 dBm is 199.5 W of peak envelope power, and the arithmetic that decides whether a product can use it is heat, not gain: at 45 percent efficiency the device draws 443.4 W of DC during the pulse and turns 243.9 W of it into heat for the length of that pulse. At 10 percent duty the average heat is 24.4 W and the average DC current from the 28 V rail is 1.58 A, which is a supply and a heatsink a product can actually carry.

The figures in this page come from the Hisiwell GaN internally matched transistor table and are the ones we quote against a customer requirement. They are not a substitute for the vendor data sheet when a board is signed off, and the two numbers that are never in the summary table, thermal resistance and the load pull contour at the band edges, have to come from the full document.

What internal matching does and does not cover

A discrete GaN die at this band needs a matching network with bond wires or a thin film structure in front of it, and that network is the part of an RF power stage that most often fails first article. The internally matched package moves that work to the vendor: the part presents close to 50 ohm at both ports across the band, the gain is specified as a single figure rather than as a contour, and the amplifier chain behind it can be assembled with connectors and microstrip instead of tuned stubs.

What it does not cover is the harmonic termination outside the band, the bias feed impedance and the thermal path under the flange. Those three remain board decisions. A part that is matched in band and sees an open circuit at the second harmonic will deliver less than the table promises, and a bias line that is a quarter wave at the wrong frequency will make the pulse droop. The vendor table gives the in band number and nothing about the out of band environment, which is why every first article we ship for this band is measured at the customer fixture before volume is released.

Where HXN40053 sits in the 4.4 to 5.0 GHz ladder

Hisiwell builds this band as a ladder of the same die and the same package, with output power as the only step. Reading the ladder is how a link budget picks a part instead of picking the biggest one.

PartBand (GHz)Psat (dBm)Gain (dB)Vd (V)Mode
HXN400474.4 to 5.0371228CW
HXN400484.4 to 5.0401228CW
HXN400494.4 to 5.0431228CW
HXN400504.4 to 5.0471128CW
HXN400514.4 to 5.0501028CW
HXN400524.4 to 5.0511032CW
HXN400534.4 to 5.0531028Pulse 100 us, 10 percent

Two rows are worth noting. HXN40052 reaches 51 dBm on a 32 V rail, and HXN40053 reaches 53 dBm on 28 V but only in pulse. A product that runs continuous wave at 4.4 GHz to 5.0 GHz stops at HXN40051, because the 53 dBm row is not rated for CW in the vendor table, and a product that needs the last 2 dB has to be a pulsed product with the supply and the thermal path to match.

The numbers a 53 dBm stage turns on

FunctionInternally matched GaN power transistor, 50 ohm in and out
Frequency band4.4 GHz to 5.0 GHz
Saturated output power53 dBm, which is 199.5 W peak envelope power
Gain10 dB at saturation
Drain efficiency45 percent at saturation
Drain voltage28 V nominal
Flatness in bandplus or minus 0.8 dB, which is 20.2 percent of power across the band
Operating modePulse, 100 microseconds, 10 percent duty
Pulsed DC input443.4 W during the pulse at 45 percent efficiency
Pulsed DC current15.8 A during the pulse from a 28 V rail
Pulsed dissipation243.9 W during the pulse
Average DC input at 10 percent duty44.3 W
Average DC current at 10 percent duty1.58 A from a 28 V rail
Average dissipation at 10 percent duty24.4 W
Input return loss expectationSet by the internal match, confirm on the data sheet curve
Second harmonic terminationBoard decision, not part of the internal match
BiasDrain 28 V, gate set for the quiescent current the vendor curve states
PackageFlange mount, screw fixed to the heatsink
Interface50 ohm microstrip or coplanar launch at both ports
CoolingHeatsink sized on the 24.4 W average, not on the peak

Peak power, average heat and the capacitor bank

A pulsed stage at 10 percent duty draws 15.8 A from the 28 V rail while the pulse is on. The supply does not have to deliver that continuously, but the capacitor bank in front of the drain does have to deliver it for 100 microseconds without drooping below the point where the pulse starts to lose power. A 100 microfarad bank with 20 milliohm of equivalent series resistance drops 1.6 V when 15.8 A is switched in for the full pulse, which is 5.7 percent of the rail and already visible in the output envelope.

The usual cure is a bank of ceramic capacitors close to the flange plus a larger electrolytic behind a small series resistor that isolates it from the pulse. The series resistor is what stops the electrolytic from ringing with the ceramics. On a first article we look at the drain waveform at the flange, not at the supply output, because the droop that matters happens across the last 20 mm of copper, not at the regulator.

The heatsink is sized on the average, 24.4 W, and the pulse train decides the temperature ripple. With a copper flange and a heatsink of 1.5 degrees per watt, the average rise is 37 degrees, and the 100 microsecond pulse adds a ripple that the thermal mass of the flange mostly absorbs. On a 25 degree baseplate that keeps the junction inside the vendor rating with margin, on a 60 degree baseplate the margin is thin and the flange temperature is the number to measure in the chamber rather than in a spreadsheet.

Matching, bias feed and the things the package does not fix

The bias feed on a 4.4 GHz to 5.0 GHz stage is a quarter wave at the centre of the band, which is about 15 mm of microstrip on 0.25 mm laminate with a dielectric constant near 3. That line is also a low impedance at the second harmonic, and the exact length of the fan out changes the gain by a fraction of a dB from unit to unit. The parts that ship with the same length and the same via fence behave the same way, which is why we keep the launch geometry in the assembly drawing and not in the operator notes.

Gate bias on a GaN part has to be applied before the drain and removed after it, with a clamp that holds the gate negative if the drain rail collapses. A sequence that lets the drain come up with the gate floating puts the device into a conduction state with no current limit, and the failure is immediate and permanent. Any product that shares a 28 V rail with motors or relays needs the clamp, and it belongs on the board, not in the controller code.

What we check before an HXN40053 order ships

This is a GaN part on silicon carbide with a flange, so the incoming checks are mechanical and thermal before they are electrical. We read the part marking against the reel label and the certificate, check the flange flatness and the screw hole, and confirm the moisture and storage history, because a flange that has been stored without a desiccant pack can need a bake before it is soldered. Those steps sit in our incoming inspection plan, and the lot record that follows the parts to the customer sits in our component traceability report.

On the electrical side we test DC parameters and function on the assembly line and do not publish RF figures of our own. Gain, output power and efficiency in the 4.4 GHz to 5.0 GHz band are confirmed on the customer fixture or at a partner RF laboratory, and the report comes back with the unit serial. That split is deliberate: a DC and functional screen catches the assembly faults, and only a calibrated RF bench can say what the part does at 4.5 GHz.

Reading a Hisiwell code and ordering the right row

The HXN prefix covers the internally matched GaN transistors, and the four digits after it step through the band and the power class rather than encoding the package. Within one band the last two digits climb with output power, and the drain voltage column is the place where two adjacent rows differ, as HXN40052 at 32 V and HXN40051 at 28 V show. A BOM that lists the part by power and not by voltage can land on the wrong row, and a 32 V part on a 28 V rail loses the top of its output range without failing.

When a customer needs this power class on a continuous wave duty cycle, the honest answer is that the row does not exist in the table and the choice is a lower power part pushed harder or two lower power parts combined. Our RF power transistor cross reference lists the parts from other vendors in the same band and power class for that comparison, and our one stop RF supply page covers the passive parts, the laminate and the connectors that go with them. Defense programs that need the full certificate chain start from our defense grade components page, where the traceability requirement is set before the part is quoted.