HXC50070
Product Specifications
HXC50070
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HXC50070 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HXC50070: 45 W on 28 V with the input matched and the output left to the builder
The HXC50070 is a 45 W LDMOS transistor on 28 V, and the vendor page uses a phrase that matters more than any figure on the row: input matched. Every other part covered on this shelf is internally matched, which means both the input and the output networks sit inside the package. This one has the input match inside and leaves the output match to the board, and that single difference changes the work a buyer has to do, the board area, and the band the part can serve.
With the output unmatched, the device presents a low impedance at the drain that the board has to transform to 50 ohm, and the band over which that transformation holds is set by the board rather than by the vendor. The vendor page claims 700 to 1700 MHz, which is 2.43 to 1 in frequency, while the index row prints 1.2 to 1.7 GHz. That is a 500 MHz gap at the bottom, and for an unmatched output it is entirely plausible that the wider band is achievable with a good board and the narrower one is what the vendor's own test fixture covers.
The rest of the row is strong: 20 dB of gain, which is the highest on this shelf, 68 per cent efficiency, which is also the highest, and 28 V. The combination of high gain, high efficiency and a low power makes it the best row on the shelf for a small transmitter, provided the output network is built properly.
The HXC50070 rows as the vendor publishes them
| Part class | LDMOS RF power transistor, input matched, output matched on the board |
| Output, index row | 45 W |
| Output in dBm, calculated | 46.53 dBm |
| Voltage at 50 ohm, calculated | 47.4 V rms, 67.1 V peak |
| Peak against the 28 V rail, calculated | 2.40 times |
| Frequency range, index row | 1.2 to 1.7 GHz |
| Frequency range, vendor page | 700 to 1700 MHz |
| Drain rail, index row | 28 V |
| Gain, index row | 20 dB |
| Drive required, calculated | 0.45 W, or 26.53 dBm |
| Drain efficiency, index row | 68 per cent |
| DC input at that efficiency, calculated | 66 W, 2.36 A at 28 V |
| Heat to remove, calculated | 21 W |
| Mode, index row | Pulse |
| Classes on the vendor page | Class AB, Class B and Class C |
| Matching inside the package | Input only, the output match is external |
| Application list, vendor page | Beidou global positioning system, communication and ISM |
| Output at 1 dB compression | Not published |
| Gain flatness across 700 to 1700 MHz | Not published |
| Thermal resistance, junction to case | Not published in text |
| Drain to source breakdown | Not published in text |
| Input, output and feedback capacitance | Not published in text |
| Load mismatch tolerance | Not published |
| Junction temperature maximum | Not published in text |
| Package outline | Not published in text |
| Data sheet link on the vendor page | Points at the site root, serves nothing |
| Parameters block on the vendor page | Published as a picture, not as text |
| Orderable addendum | None published |
| Packing quantity and moisture level | Not published |
An unmatched output is a schedule item, not a defect
With the output unmatched, the board carries the matching network, and that network is a tuned structure: a shunt capacitor, a series line, a shunt stub, and a choke on the drain feed. At 1.7 GHz the physical size is small, which means the tolerance on each element is tight and the placement of the ground vias under the shunt elements is part of the match. A first article on this row will take a network analyser and several iterations of the output network.
The reward is band coverage. An external match can be tuned for the customer's actual band rather than accepting the vendor's compromise across an octave, and a narrow band match at 1.5 GHz or at 1.0 GHz can be made more efficient than a wideband one. On a 45 W part with 68 per cent efficiency and 21 W of heat, that freedom is worth real money.
The risk is oscillation. Twenty decibels of gain with an external output match and an unmatched drain impedance is the classic recipe for a low frequency oscillation, so the drain feed needs a lossy choke, the gate needs a series resistor, and the ground plane has to be continuous under the device. None of that is exotic, but all of it has to be on the first board rather than added later.
Twenty decibels of gain and 0.45 W of drive
Twenty decibels is three times the gain of the 1000 W row and the highest on the shelf. At 45 W it means 0.45 W of drive, or 26.53 dBm, which a small gain block or a single transistor stage can deliver. That makes the whole transmitter a two device chain with a very small driver, which is what a portable Beidou terminal or a compact telemetry unit needs.
High gain also means the input match matters less, because the drive sees an internally matched input, and the isolation between output and input is the limit. Keep the driver physically away from the output network, screen the two stages if the housing allows, and put the bias decoupling close to the gate rather than at the far end of the board.
The efficiency figure of 68 per cent is the other half of the story. At 45 W it means 66 W from the supply and 21 W of heat, which is a heat sink the size of a matchbox and a converter that runs from a 28 V bus with room to spare. Very few rows on this shelf have that combination, and it is the reason the row is worth the extra output network work.
Beidou, communication and ISM on one row
The vendor page names Beidou, communication and ISM. Beidou B1 at 1561 MHz and B3 at 1268.52 MHz fall inside the 1.2 to 1.7 GHz index band, and a 45 W part is a plausible transmitter for a ground beacon or a repeater. The communication part of the application list covers the 1.4 GHz and 1.8 GHz trunking and data links, and ISM covers the 2.4 GHz band, which is outside the index band but inside the page claim.
For a Beidou transmitter at 1561 MHz the index band is the right guide, and the board should be built at that frequency. For an ISM product at 2.4 GHz the page claim is the only evidence, and since the output match is external, the band is what the board makes it. A buyer intending to use this part at 2.4 GHz should ask for a test at that frequency rather than assume the 700 to 1700 MHz claim extends there, because it does not.
The pulse marking on the index is worth a second look for a Beidou or ISM use. Those applications are continuous or high duty, and a pulse row needs a duty figure in writing before it can be quoted. That is the same gap that appears on every row of this shelf, and on this one it sits next to an application list that is mostly continuous wave.
Where the HXC50070 sits on the shelf
At 700 to 1700 MHz the shelf carries this 45 W row and a 180 W row, both input or internally matched and both on 28 V. The step from 45 W to 180 W is 6.02 dB, which is a large jump, and there is no 90 W row in this band to fill it. The 40 W row at 1.0 to 2.0 GHz is 0.51 dB below this one but covers a different band and is internally matched.
Read as a choice, this row is for a 28 V product that needs about 45 W at a band the builder can match, wants the highest gain and efficiency on the shelf, and has the test equipment to tune an output network. A buyer who cannot tune an output network takes the internally matched 40 W row at 1.0 to 2.0 GHz; a buyer who needs 180 W takes the larger row and gives up the output match work.
Before the purchase order goes out
Three procurement points follow. No orderable addendum is published for this row, so the tray quantity, the moisture level and the marking have to come from the vendor in writing before a production order is placed, and the incoming route for a part with an external output match is set out on the incoming inspection plan page. Buyers comparing this row against a competitor's 45 W 1.5 GHz part should work from the RF power transistor cross reference, which lines the two up on matching, gain and package rather than on the headline wattage. A bill of materials that carries the driver, the output match and the drain choke can be placed through the RF component sourcing route.