Contact Us

HXN40029

Brand: Hisiwell
Hisiwell HXN40029 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXN40029 — Discrete & Power Semiconductors | Superb Automation

HXN40029

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXN40029 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXN40029: the 2.2 to 2.4 GHz member at 398 W

The HXN40029 carries the same 56 dBm output as the two parts below it in frequency, on the same 50 V rail, with the internal match moved to 2.2 to 2.4 GHz. The published rows are 2.2 to 2.4 GHz, saturated output at least 56 dBm, gain at least 12 dB, drain efficiency at least 50 per cent typical, 50 ohm ports, plus or minus 0.8 dB of flatness and pulsed operation at a 1 ms pulse width and 10 per cent duty.

The band matters because 2.2 to 2.4 GHz is where S band telemetry, satellite command and downlink services and the lower edge of the 2.4 GHz industrial band all sit. A transmitter that has to cover 2.2 to 2.4 GHz in one unit, with one device, is the case this part is built for, and a part that is 50 ohm at both ports removes the matching network that would otherwise sit on the carrier.

Fifty six dBm is 398.1 W, the DC input at 50 per cent efficiency is 796.2 W, the drain current at 50 V is 15.9 A and the drive at 12 dB of gain is 44 dBm, or 25.1 W. Those are the four numbers that decide the supply, the driver and the cooling, and they are identical to the 1.9 to 2.1 GHz member because the output and the rail are the same. What differs is the band, the gain floor and the flatness window over which that gain has to hold.

The construction is the family standard: an internally matched gallium nitride die on a film hybrid carrier inside a metal package, with the match synthesised for the band rather than provided as a separate circuit. The page states the temperature and environmental adaptability of the family without quantifying it, which is the first thing to ask about in writing.

The parameter rows Hisiwell publishes for HXN40029

Part classGallium nitride power transistor, internally matched
Frequency range2.2 to 2.4 GHz
Saturation output power as publishedat least 56 dBm
Saturation output power in watts, calculated398.1 W
Gain as publishedat least 12 dB
Drain efficiency as publishedat least 50 per cent, typical
Drain voltage50 V
Flatness across the bandplus or minus 0.8 dB
Operating modepulsed, 1 ms pulse width at 10 per cent duty
Input impedance50 ohm
Output impedance50 ohm
Output at 1 dB compressionnot published, the index prints a slash
DC input at saturation, calculated796.2 W
Drain current at saturation, calculated15.92 A at 50 V
Dissipation during the pulse, calculated398.1 W
Average dissipation at 10 per cent duty, calculated39.8 W
Average drain current at 10 per cent duty, calculated1.59 A
Drive power for the rated output, calculated44 dBm, 25.1 W
Output per 100 MHz of the band, calculated199.1 W
Thermal resistance, junction to casenot published
Transient thermal impedancenot published
Package outline and dimensionsnot published in text
Scattering parametersnot published
Pinch off voltage and gate bias pointnot published on this page
Operating and storage temperaturenot published
Moisture level and floor lifenot published
Orderable addendum and packingnot published
Neighbour at the same output, lower bandHXN40023, 1.9 to 2.1 GHz, 12 dB gain
Neighbour at the same output, higher bandHXN40037 at 54 dBm over 2.7 to 2.9 GHz

Twelve decibels of gain at 398 W

Twelve decibels is a low gain for a device with an internal match, and it is worth reading as a statement about how much energy the matching network and the package take. The preceding stage has to deliver 25.1 W to produce 398 W, and every element between them subtracts directly: a 0.5 dB isolator is 3 W of the drive budget, a connector pair and a short cable at 2.3 GHz another half dB, and the input return loss of the final stage decides how much of the remainder is reflected rather than absorbed.

A three stage chain built around this part is therefore the normal arrangement. A 10 W driver at 34 dBm with 10 dB of gain needs 24 dBm, which is 0.25 W, so the small signal front end can be a packaged amplifier. That is a chain which is easy to build and hard to keep inside a 2 dB gain drift budget, which is why the cross reference work records the gain floor of each stage rather than the typical.

The flatness row deserves the same treatment. Plus or minus 0.8 dB over the band is stated for saturated output, so the part is level at saturation by construction; the gain slope at a backed off drive is a separate curve that the vendor does not publish for this part. A system that runs 6 dB backed off to keep the modulation inside the linear window is working on data that is not on the page.

Heat, average current and the 50 V feed

At a 10 per cent duty cycle the average dissipation is 39.8 W and the average drain current 1.59 A, while the instantaneous figures are 398 W and 15.9 A. That 25 to 1 ratio between average and peak is the whole reason the part exists in a pulsed system, and it is also the reason a supply chosen for the average current fails on the bench. The bank has to supply 15.9 mC in each 1 ms pulse, so 2 V of allowed sag means 7.9 mF and 1 V means 15.9 mF, with the ESR inside the loop.

With no junction to case figure published, the cooling has to be specified from the load and verified on the first article. At 39.8 W of average load, a carrier offering 0.5 C per watt gives 20 C of average rise over the case, which any reasonable heatsink can hold. The number that cannot be computed is the junction ripple inside the pulse, and it is the one that decides whether the device survives a 1 ms key at 398 W.

Efficiency sensitivity is the same as the rest of the family: 45 per cent raises the dissipation to 486.6 W and the current to 17.7 A, 55 per cent lowers them to 325.7 W and 14.5 A. A purchase specification that asks for the typical figure and receives the floor is asking for 22 per cent more heat than the plan assumed.

Where a 2.2 to 2.4 GHz stage at this power fits

The fit is a pulsed transmitter or a test amplifier that has to cover the whole 2.2 to 2.4 GHz window with one device: telemetry and command transmitters, instrumentation radar, satellite ground equipment, and laboratory amplifiers for antenna and receiver testing. In each case the 50 ohm ports remove the need for an external match and the 10 per cent duty cycle keeps the cooling inside a forced air budget.

It is a poor fit for continuous wave at 398 W, for the thermal reason set out above, and a poor fit for a linear multicarrier application, because the compression point is not published at all. It is also a poor fit where the driver budget cannot reach 25 W, which rules out driving it from a packaged small signal amplifier.

The alternative worth comparing is not a cheaper part but a different band member: the same output on a 50 V rail appears at 1.2 to 1.4 GHz, 1.6 to 1.7 GHz, 1.9 to 2.1 GHz and here, and the whole ladder is listed in our one stop RF supply view, so a product family covering several bands can keep one supply, one driver and one cooling stack across all of them.

Questions we answer about HXN40029 before a lot is booked

The first is the true band edge. A part tuned for 2.2 to 2.4 GHz is not the part for a system that operates at 2.45 GHz, and the plus or minus 0.8 dB row describes the stated band only. Ask where the match was centred and what the gain and power do 50 MHz outside it.

The second is the bias sequence and gate window. Nothing on this page gives a pinch off voltage, so the first article has to be biased from a negative supply that is established before the drain, and the sequence has to be enforced in the system rather than left to an operator.

The third is the lot documentation. With no orderable addendum and no moisture level published, the purchase order names the band and the pulse condition and the incoming inspection plan records what arrives. Where a second source is needed, the flange, the pin positions and the 50 ohm ports decide interchangeability rather than the dBm row, because two 56 dBm parts in different flanges are not interchangeable in a built assembly.