Contact Us

VBC9216

Brand: VBsemi
VBsemi VBC9216 is a discrete semiconductors component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

VBC9216 — Discrete & Power Semiconductors | Superb Automation

VBC9216

VBsemi — Discrete & Power Semiconductors

Product Overview

The VBC9216 from VBsemi is a discrete power semiconductor delivering efficient switching and power conversion. VBsemi (微碧半导体) specializes in discrete MOSFETs, power transistors, and protection devices for power supplies, motor control, and consumer electronics.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

VBC9216: two independent 20 V N channels in a TSSOP8

The VBC9216 puts two separate N channels in one TSSOP8. The drains are not tied, so each half is a complete switch with its own gate, drain and source brought out. The pair is rated at 20 V, carries 7.5 A per channel, and prints 17 milliohm at a 2.5 V gate, 12 milliohm at 4.5 V and 11 milliohm at 10 V. The threshold is 0.86 V and the gate window is plus or minus 12 V.

The threshold is the interesting number. At 0.86 V the part is fully enhanced by a 2.5 V drive, which is what the first column of the catalogue table is telling you. A logic rail of 1.8 V sits only about 0.9 V above threshold, so the device is on but not at its rated resistance. A rail of 3.3 V or above puts it in the flat part of the curve.

The gate window of 12 V is narrower than the 20 V of most parts in this family. On a 12 V rail with any ringing, the gate sees more than 12 V and the oxide is at risk. Clamp the gate or drive it from a lower rail.

Key data for the VBC9216

ConfigurationDual N channel, independent drains
PackageTSSOP8, surface mount
VDS20 V
VGSPlus or minus 12 V
Vth0.86 V
ID7.5 A per channel
RDS(on) at 2.5 V17 milliohm
RDS(on) at 4.5 V12 milliohm
RDS(on) at 10 V11 milliohm
TechnologyTrench
Drive referenceEach gate referenced to its own source
MatchingOne die, so the two halves track over temperature

Two switches, one package, and the thermal bill

Two channels in one body means the combined dissipation has to leave through one lead frame. Each channel at 3 A and a 4.5 V gate burns 108 milliwatt, which is trivial. At 7.5 A each it burns 675 milliwatt, and the pair together is 1.35 watt in a TSSOP8 with no exposed pad. That is above what the package can carry in still air, so the 7.5 A figure is a pulsed or a well heatsinked claim.

The advantage of the two in one body is that they share a temperature. Two separate parts on the same board sit at different temperatures depending on their copper, and a current share between them drifts. Here the drift is common mode, which matters when the two halves are used as a push pull pair or as two phases of the same converter.

Where the two halves drive different loads at different times, the shared thermal path is less helpful. One hot half heats the other, and the cooler half loses margin it did not need to lose.

Choosing it and the drive details that decide the loss

The 2.5 V column makes the part usable from a 3.3 V rail without a driver, and from a 2.5 V rail with some penalty. Above 4.5 V the curve is flat, so there is nothing to gain from driving the gate harder than 5 V, and the 12 V gate limit argues against it.

With a threshold of 0.86 V, leakage in the off state deserves a second look. A low threshold device has a subthreshold current that is not zero at 0.5 V of gate, and in a battery product that sits for months the gate must be pulled firmly to the source, not left to a weak pull down.

Two channels with independent drains also give the option of paralleling them on the board. Paralleling inside the package is not possible because the drains are separate pins, but tying the pins together outside and driving both gates from one resistor gives a 5.5 milliohm equivalent. The current share is then set by threshold matching, which on one die is good.

Where the part fits

Two independent 20 V N channels suit a dual rail product where both rails have to be switched, a synchronous buck with both low side switches in one package, or a pair of load switches on a battery powered board. The 20 V rating sets the ceiling at a nominal 12 V rail with modest ringing, and rules out anything with a load dump.

For two switches that have to come from one source and stay matched over a programme, the power management cross reference page covers what is checked before a substitute is accepted.

The sourcing side of this part is covered on the date code management. For a small logic level part that can sit in stores for a year, that page covers how age is tracked and what we will not ship into a new build.

Questions we get on this code

Is 0.86 V threshold a logic level part? It is a low threshold part. It turns on at 2.5 V, which is the first column of the table. It is not characterised for a 1.8 V rail, so do not assume the 17 milliohm figure applies there.

Can both halves be paralleled? Yes, at the board level, by tying the drain pins and the source pins and driving both gates through one resistor each. Expect about half the on resistance, not exactly half, because the two halves never match perfectly.

Why is the gate window only 12 V? The thinner gate oxide that gives the low threshold also sets the limit. On a 12 V rail, keep the gate drive at 5 V or below and let a resistor divider or a clamp absorb the ring.

What is the off state leakage at high temperature? The catalogue page does not print it. For a battery product ask for the data sheet curve at 85 C before fixing the pull down resistor.