Contact Us

HXC40020

Brand: Hisiwell
Hisiwell HXC40020 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXC40020 — Discrete & Power Semiconductors | Superb Automation

HXC40020

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXC40020 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXC40020: eight watts at compression on 5.3 to 5.9 GHz

The HXC40020 is the second member of the gallium arsenide internally matched family on the 5.3 to 5.9 GHz window. The vendor states in-plane matching synthesis and thin film hybrid integration, with 50 ohm at both ports. The index row reads 5.3 to 5.9 GHz, saturation output not printed, output at 1 dB compression at least 39 dBm, gain at least 10 dB, drain efficiency at least 35 per cent, 10 V drain rail, plus or minus 0.8 dB flatness, continuous wave.

39 dBm is 7.94 W. The part doubles the output of the HXC40019 on the same window and the same rail, and it does so by giving up five points of efficiency, from 40 per cent to 35. The current doubles with the output, from 1 A to 2.27 A, so the supply and the feed have to be sized for the larger figure even though the rail is unchanged.

The window is 600 MHz, 10.71 per cent fractional at 5.6 GHz. The flatness of plus or minus 0.8 dB and the 50 ohm ports are the same as the rest of the family, which means the choice between members is made almost entirely by output and by the thermal envelope that comes with it.

The parameter rows Hisiwell publishes for HXC40020

Part classGallium arsenide internally matched power transistor
Matching technique, as stated by the vendorIn-plane matching synthesis, thin film hybrid integration
Frequency range5.3 to 5.9 GHz
Bandwidth, calculated600 MHz, 10.71 per cent fractional at a 5.6 GHz centre
Output at 1 dB compression as publishedat least 39 dBm
Output at 1 dB compression in watts, calculated7.94 W
Saturation output power as publishednot published, the index prints a slash in that column
Gain as publishedat least 10 dB
Drain efficiency as publishedat least 35 per cent
Drain voltage10 V
Input and output impedance, as stated by the vendor50 ohm at both ports
Flatness across the bandplus or minus 0.8 dB
Operating modecontinuous wave
Drive power for the compression point, calculated29 dBm, 0.79 W
DC input at compression, calculated22.70 W
Drain current at compression, calculated2.27 A at 10 V
Dissipation at compression, calculated14.75 W
Dissipation if efficiency reaches 50 per cent, calculated7.94 W
Output per 100 MHz of the band, calculated1.32 W
Load voltage at compression into 50 ohm, calculated19.93 V RMS, 28.18 V peak
Thermal resistance, junction to casenot published
Package outline and dimensionsnot published in text, the product page carries one outline image
Scattering parametersnot published
Gate bias point and quiescent currentnot published
Operating and storage temperaturenot published
Orderable addendum, marking and packingnot published
Neighbour on the same band at 41 dBmHXC40021, 38 per cent efficiency
Neighbour on the same band at 36 dBmHXC40019, 40 per cent efficiency

The middle of the ladder is the useful place to be

An 8 W part on this band is a driver in most systems, not a final stage. It sits in front of a 41 or a 45 dBm device and delivers 0.79 W of clean drive into it, or it drives an antenna directly in a short range link where 8 W is more than enough. Both uses are common and they pull the specification in different directions: the first needs linearity at a modest back off, the second needs efficiency near compression.

At 29 dBm of drive the part needs a driver of its own at something like 19 dBm, which is a level a packaged gain block can reach. That makes the transmitter three stages, and the level plan has to be arranged so that no single stage is asked to deliver more than a decibel of gain compression at the peak of the modulation. In practice the clean arrangement puts the first two stages at 3 dB back off and the final stage at the compression point only for constant envelope signals.

2.27 A at 10 V is within reach of a single phase converter, and the feed can be a wide track with a few vias rather than a machined bar. The 14.75 W of heat needs a heatsink but not a cold plate: on a 2 C per watt carrier the case rise is 30 C, which fits a sealed box at 50 C ambient with a modest fin area.

The one thing that does not scale down with the part is the matching. Because the ports are 50 ohm and matched, the board does not need a tuned network, but the transition from the package to the microstrip still has to be modelled. A poor launch at 5.9 GHz can cost a decibel and a half, which on an 8 W part is 1.5 W of output lost after the vendor's number has been taken at the flange.

5.3 to 5.9 GHz in products

The window covers the 5.47 to 5.725 GHz fixed wireless range, the 5.8 GHz ISM allocation, and the lower channels of the unlicensed 5 GHz wireless access spectrum in markets that permit the upper part of the band. It also sits immediately below the upper C band satellite uplink that begins at 5.925 GHz, which is why some satellite terminals use a 5.3 to 5.9 part for a local link and a 5.8 to 6.7 part for the uplink.

For a wireless access product the peak to average ratio of the modulation is the dominating constraint. A part at 39 dBm at compression is run at about 33 dBm for a clean wideband signal, which is 2 W, and the efficiency at that point is nearer 22 per cent than 35. The heat then comes from the DC input at a low output, which is why a backed off transmitter can run hotter than its output suggests.

For a fixed link with constant envelope modulation the part runs near compression and the published row applies. That case is the one the vendor specifies, and it is the one where the 7.94 W and the 35 per cent can be carried into a link budget without correction.

Our guide to choosing an RF amplifier sets out the modulation first sequence, because the same device can be the right answer for a constant envelope link and the wrong one for an OFDM access point at the same output.

Two decibels up from here

The HXC40021 is the next member on this window at 41 dBm with 38 per cent efficiency and 3.31 A. Two decibels is 1.58 times the output, which in a system budget is a small change, and the efficiency is three points better, which is unusual on a step up. For a transmitter that sits at 39 dBm in normal operation, the larger part run at 39 dBm carries two decibels of headroom and draws slightly less current than this part at its compression point.

The step down to the HXC40019 at 36 dBm is three decibels and takes the current back to 1 A. Below 4 W the whole power train simplifies, and a product that only needs 4 W should not carry the converter and the heatsink that an 8 W part brings.

Our cross reference page puts the four members of this window against the competitor numbers we are most often asked to replace.

Questions buyers ask before ordering HXC40020

Is the 39 dBm figure a minimum or a typical? The vendor prints at least 39 dBm, so it is a minimum across the band, and the plus or minus 0.8 dB flatness means the edges can sit at 38.2 dBm.

Is there a data sheet with curves? No. The published material is the index row, the product page with five parameters and the 50 ohm port statement. There are no curves and no scattering parameters, so the response shape has to be measured.

What does the part need at the gate? The vendor does not publish a bias point. A depletion mode device of this class needs the gate held negative before the drain is applied, and the sequencer is part of the transmitter.

How do we start? Send the output at the antenna, the modulation, the ambient and the rail. We will confirm the member of the family that fits, quote from the current schedule and ship a sample measured at both band edges and at the centre.