Contact Us

HXC40019

Brand: Hisiwell
Hisiwell HXC40019 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXC40019 — Discrete & Power Semiconductors | Superb Automation

HXC40019

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXC40019 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXC40019: four watts at compression on 5.3 to 5.9 GHz with forty per cent efficiency

The HXC40019 is the smallest member of the gallium arsenide internally matched family on the 5.3 to 5.9 GHz window. The vendor states in-plane matching synthesis and thin film hybrid integration, with 50 ohm at both ports. The index row reads 5.3 to 5.9 GHz, saturation output not printed, output at 1 dB compression at least 36 dBm, gain at least 10 dB, drain efficiency at least 40 per cent, 10 V drain rail, plus or minus 0.8 dB flatness, continuous wave.

36 dBm is 3.98 W. Forty per cent is the highest efficiency in the family, and it belongs to the smallest die. That is not a coincidence: a small periphery at 4 W has less thermal spread and less matching loss than a 30 W device on the same 10 V rail, and the process can be biased closer to its optimum. The same pattern appears on every band of this family, where the 36 dBm member quotes 40 per cent and the 45 dBm member quotes 35 per cent.

The window is 600 MHz, 10.71 per cent fractional at a 5.6 GHz centre. It covers the 5.8 GHz ISM allocation at its upper edge, the 5.47 to 5.725 GHz fixed wireless range, and part of the upper C band.

The parameter rows Hisiwell publishes for HXC40019

Part classGallium arsenide internally matched power transistor
Matching technique, as stated by the vendorIn-plane matching synthesis, thin film hybrid integration
Frequency range5.3 to 5.9 GHz
Bandwidth, calculated600 MHz, 10.71 per cent fractional at a 5.6 GHz centre
Output at 1 dB compression as publishedat least 36 dBm
Output at 1 dB compression in watts, calculated3.98 W
Saturation output power as publishednot published, the index prints a slash in that column
Gain as publishedat least 10 dB
Drain efficiency as publishedat least 40 per cent
Drain voltage10 V
Input and output impedance, as stated by the vendor50 ohm at both ports
Flatness across the bandplus or minus 0.8 dB
Operating modecontinuous wave
Drive power for the compression point, calculated26 dBm, 0.40 W
DC input at compression, calculated9.95 W
Drain current at compression, calculated1.00 A at 10 V
Dissipation at compression, calculated5.97 W
Dissipation if efficiency reaches 50 per cent, calculated3.98 W
Output per 100 MHz of the band, calculated0.66 W
Load voltage at compression into 50 ohm, calculated14.11 V RMS, 19.95 V peak
Thermal resistance, junction to casenot published
Package outline and dimensionsnot published in text, the product page carries one outline image
Scattering parametersnot published
Gate bias point and quiescent currentnot published
Operating and storage temperaturenot published
Orderable addendum, marking and packingnot published
Neighbour on the same band at 39 dBmHXC40020, 35 per cent efficiency
Neighbour on the lower window at 36 dBmHXC40019 is the smallest on this band, no lower member

One ampere is the whole transmitter

At 1.00 A on 10 V this part can be fed from a small buck converter without a multiphase arrangement, and the decoupling can be a single low inductance path from the drain pad to a ground plane. That changes the bill of materials more than the radio frequency performance does: a transmitter built around this device needs one converter, one bias network and a heatsink that can be a plate rather than a cold plate.

The 5.97 W of heat is manageable in a sealed enclosure if the carrier is metal and the interface is thin. A 2 C per watt carrier gives a 12 C rise, and the flange stays within 15 C of the base plate. Compare the 58.73 W of the 45 dBm member on the same family and the difference in mechanical complexity is the real reason the small part exists.

The drive is 0.40 W, or 26 dBm. A packaged gain block or a low power transistor can supply that, which means the transmitter can be two stages rather than three. At 26 dBm the driver's own compression behaviour matters, because the drive has to stay clean to keep the output clean, but the power level is small enough that the driver can sit on the same board without its own heatsink.

Ten decibels of gain is the same as the rest of the family, and it keeps the input match forgiving. An isolator in front is optional on a part at this gain unless the load can change during operation, and most products at 4 W do not carry one.

Where 5.3 to 5.9 GHz sits in the market

The band covers the 5.47 to 5.725 GHz fixed wireless range, the 5.8 GHz ISM allocation at its upper edge, several 5 GHz wireless access channels in markets that license the upper part of the band, and the lower edge of the upper C band satellite uplink that begins at 5.925 GHz just outside the window.

A 4 W part on this band is sized for a customer premises terminal, a short range data link, a radar front end for a small aperture, or a driver for a larger stage. All four have the same requirement in common: a clean signal at a modest power, in a box with limited thermal headroom.

Because the band is shared with unlicensed services, the emission limits at the edges of the allocation are usually tighter than the flatness of the amplifier. An internally matched part with plus or minus 0.8 dB flatness across 600 MHz is fine for a licensed channel inside the window, and for an unlicensed product the filter after the amplifier does the emission work rather than the amplifier itself.

The four power steps on this band

The 5.3 to 5.9 GHz window carries four members on 10 V: this 36 dBm part, the HXC40020 at 39 dBm, the HXC40021 at 41 dBm and the HXC40022 at 45 dBm. The efficiency falls from 40 per cent at the bottom of the ladder to 35 per cent at the top, while the current rises from 1 A to 9 A. The gain stays at 10 dB for all four, which means the drive requirement scales exactly with the output.

The narrow two decibel step between 39 and 41 dBm is the useful one in a level plan: the larger device run at 39 dBm carries two decibels of linearity margin for 1.26 W of drive instead of 0.79 W. The four decibel step from 41 to 45 dBm is the one that changes the power supply.

Our guide to choosing an RF amplifier walks through the rail first sequence that keeps a line up from being specified around the wrong device, and our RF component sourcing page covers the questions we ask before quoting any of them.

Questions buyers ask before ordering HXC40019

Is 40 per cent efficiency real at 4 W? It is the vendor figure at 1 dB compression on a continuous wave signal. At a backed off operating point it will be lower, and it will fall further if the part is run at 5.3 GHz rather than mid band, because the match is centred at 5.6 GHz.

Can it drive a larger stage? Yes, and that is a common use. Four watts of clean drive is enough for a 45 dBm final stage on the same band, and the two parts share a family and a rail.

Is a heat spreader needed? At 5.97 W the flange can usually be mounted directly to a metal chassis with a thin interface material. The vendor publishes no thermal resistance, so the first article should carry a thermocouple.

How do we start? Send the output, the band edges, the ambient and the rail. We will confirm the fit against the ladder on this window, quote from the current schedule and ship a sample measured at 5.3, 5.6 and 5.9 GHz.