Contact Us

HXC40007

Brand: Hisiwell
Hisiwell HXC40007 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXC40007 — Discrete & Power Semiconductors | Superb Automation

HXC40007

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXC40007 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXC40007: sixteen watts at 3.1 to 3.5 GHz on a 10 V rail

The HXC40007 is a gallium arsenide internally matched power transistor covering 3.1 to 3.5 GHz. Hisiwell builds it with in-plane matching synthesis and thin film hybrid integration and specifies 50 ohm at both ports. The index row reads 3.1 to 3.5 GHz, saturation output at least 42 dBm, output at 1 dB compression not printed, gain at least 10.5 dB, drain efficiency at least 35 per cent, 10 V drain rail, plus or minus 0.8 dB flatness, continuous wave.

42 dBm is 15.85 W, and it is a saturated figure. Ten and a half decibels of gain means the drive for that output is 31.5 dBm, which is 1.41 W. A part that needs a watt and a half of drive is a final stage behind a real driver, and the driver is usually the more expensive of the two because it has to be linear and quiet as well as strong.

Thirty five per cent efficiency at saturation gives 45.28 W of DC input, which is 4.53 A at 10 V, and 29.43 W of heat. That is the highest current and the highest dissipation in the GaAs family in this batch, and it makes the supply and the carrier the first two items on the list rather than the last two.

The band is 400 MHz wide, 12.12 per cent fractional at a 3.3 GHz centre. It covers the S band radar allocation around 3.1 to 3.5 GHz, several fixed and mobile communication windows, and part of the 3.3 to 3.4 GHz band being released for private 5G in several countries. A part that covers the whole window is worth more than 2 dB of extra output on a narrower one when the product has to address both radar and communications.

The parameter rows Hisiwell publishes for HXC40007

Part classGallium arsenide internally matched power transistor
Matching technique, as stated by the vendorIn-plane matching synthesis, thin film hybrid integration
Frequency range3.1 to 3.5 GHz
Bandwidth, calculated400 MHz, 12.12 per cent fractional at a 3.3 GHz centre
Saturation output power as publishedat least 42 dBm
Saturation output power in watts, calculated15.85 W
Output at 1 dB compression as publishednot published, the index prints a slash in that column
Gain as publishedat least 10.5 dB
Drain efficiency as publishedat least 35 per cent
Drain voltage10 V
Input and output impedance50 ohm, matched
Flatness across the bandplus or minus 0.8 dB
Operating modecontinuous wave
Drive power for the saturated output, calculated31.5 dBm, 1.41 W
DC input at saturation, calculated45.28 W
Drain current at saturation, calculated4.53 A at 10 V
Dissipation at saturation, calculated29.43 W
Dissipation if efficiency reaches 60 per cent, calculated10.57 W
Output per 100 MHz of the band, calculated3.96 W
Load voltage at saturation into 50 ohm, calculated28.15 V RMS, 39.81 V peak
Estimated linear output at 6 dB back off, calculated3.98 W, 36 dBm
Thermal resistance, junction to casenot published
Package outline and dimensionsnot published in text
Scattering parametersnot published
Gate bias point and quiescent currentnot published
Operating and storage temperaturenot published
Orderable addendum, marking and packingnot published
Neighbour on the same rail at 37 dBm saturation on 2.7 to 3.4 GHzHXC40006, 12 dB gain

Four and a half amperes and thirty watts of heat

4.53 A on a 10 V rail is more current than most small buck converters deliver comfortably, and the transient at the waveform rate is what breaks them. A converter specified at 5 A of average output may still collapse on a 2 A load step at a kilohertz rate, and the collapse shows up as gain modulation on the radio frequency envelope.

The bulk capacitor at the drain feed is part of the radio frequency circuit, not just a power component. A few hundred microfarads of low impedance capacitor within a centimetre of the flange, a ferrite bead between the capacitor and the converter, and a wide short track are the usual arrangement. The vendor publishes no recommended bias network, so the arrangement has to come from the application note of a comparable part or from measurement.

29.43 W of heat on a 2 C per watt carrier gives a 59 C case rise, which is a working margin over a 25 C base plate and tight over a 55 C one. A copper tungsten carrier or a copper block is normal at this dissipation. Aluminium with a thermal pad is a compromise that works at low duty and fails in a sealed enclosure.

Because the efficiency is a minimum at saturation, the real part may run at 40 per cent, which brings the dissipation down to 23.8 W. That margin belongs to the hot end of the range, since efficiency falls as the flange heats, and spending it on a lighter carrier in the first build is a common way to fail the thermal test.

The gain and the driver at ten and a half decibels

10.5 dB of gain is the lowest in the GaAs family in this batch, and it puts the drive requirement at 1.41 W. The driver for that is a part with at least 32 dBm of output and enough gain of its own to be driven from a 10 dBm source. That is a two part driver, and it makes this a three stage line in most systems.

Low gain is not a defect. A part with 10.5 dB of gain is easier to keep stable, is less sensitive to the load pulling the driver, and has a wider instantaneous bandwidth than a high gain part of the same size. In a pulse application where the driver is already present for other reasons, this is the efficient choice.

The published flatness of plus or minus 0.8 dB across 400 MHz is a real promise. It allows a level plan to be built on the data sheet rather than on a measurement, which saves a bench iteration in a programme with a tight schedule. Systems with an automatic level control loop can work with more variation, but the loop has to have the range to cover it.

Linearity beyond the compression point is unpublished. At 6 dB of back off the output estimate is 3.98 W, and the efficiency at that point is nearer 20 per cent than 35. A system that runs at back off all day should size the supply and the carrier for that case, not for the saturation figures.

Where 3.1 to 3.5 GHz is used

S band radar uses 3.1 to 3.5 GHz in several maritime and ground systems, and the same window carries fixed links and telemetry. Several administrations are also opening 3.3 to 3.4 GHz for private and industrial 5G, which has brought a new set of products into this band and a new set of cost targets.

In radar the part runs pulsed and near saturation, which is the case the published figures describe. In private 5G the waveform is OFDM with a high peak to average ratio, and the part is backed off by eight to ten decibels. At that point the output is between 1.6 and 2.5 W and the efficiency is around 15 to 20 per cent, so the thermal load is lower than the saturation figures suggest and the linearity requirement is higher than the vendor data can support.

For a private 5G product the honest route is a two tone measurement and an error vector magnitude sweep at the intended back off, on a sample, before the part is written into a BOM. The vendor data supports a constant envelope application and stops there.

Our guide to choosing an RF amplifier covers the difference between a saturated and a linear operating point, and it is the place to start when the waveform is not constant envelope.

Comparing HXC40007 with its neighbours

The HXC40006 covers 2.7 to 3.4 GHz at 37 dBm saturation with 12 dB of gain, so it overlaps this band between 3.1 and 3.4 GHz at five decibels less output and one and a half decibels more gain. The HXC40011 covers 4.4 to 5.0 GHz at 36 dBm compression with 10 dB of gain, which is a different window with lower output.

The GaAs parts in this family add output in five decibel steps within each window, so a 3.1 to 3.5 GHz product with a higher power requirement has no larger member here. It would have to move to a GaN part on 28 V, which offers comparable output for a quarter of the current and a much higher gain.

A cross reference has to match the rail, the mode, the band and the output point before the gain is considered. Our RF power transistor cross reference page sets out that sequence and the questions we ask before a candidate goes on a bench.

Questions buyers ask before ordering HXC40007

Is 42 dBm saturation or compression? It is saturation. The compression column carries a slash. For a linear application the usable output is lower, about 3.98 W at six decibels of back off.

Is there a data sheet? No. The vendor publishes an index row and a product page with the same electrical figures and the 50 ohm port impedance. There are no curves, no scattering parameters, no thermal data and no package drawing.

What has to be on the purchase order? The band, the 10 V rail, the continuous wave mode and the quantity. No orderable addendum, marking code or packing column is published, so reel size and moisture level come from the factory quotation.

How do we start? Send the band, the waveform, the output required at the antenna connector, the drive available and the rail. We will confirm the fit, quote from the current factory schedule and ship a sample with measured output and gain at 3.15, 3.3 and 3.45 GHz.