Contact Us

HXC40004

Brand: Hisiwell
Hisiwell HXC40004 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXC40004 — Discrete & Power Semiconductors | Superb Automation

HXC40004

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXC40004 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXC40004: sixteen watts at compression on 2.0 to 2.2 GHz from a 10 V rail

The HXC40004 is a gallium arsenide internally matched power transistor covering 2.0 to 2.2 GHz. Hisiwell builds it with in-plane matching synthesis and thin film hybrid integration and specifies 50 ohm at both ports. The index row reads 2.0 to 2.2 GHz, saturation output not printed, output at 1 dB compression at least 42 dBm, gain at least 11 dB, drain efficiency at least 45 per cent, 10 V drain rail, plus or minus 0.8 dB flatness, continuous wave.

42 dBm at compression is 15.85 W. The saturation column carries a slash, so the headline is a linear figure rather than a saturated one. For a GaAs part that distinction is not cosmetic: the compression point is where the part is still usable for a modulated waveform with modest back off, and the saturation number would be a decibel or so higher with the gain already collapsing.

The efficiency column reads 45 per cent, which is the highest figure in this GaAs family and is quoted at the same compression point as the output. Fifteen watts of radio frequency from 35.22 W of DC input is 3.52 A at 10 V, and 19.37 W of heat leaves the flange. Those figures are calculated from the published rows and are labelled as calculated wherever they appear.

The band is 200 MHz wide, 9.52 per cent fractional at a 2.1 GHz centre. That window covers part of the S band used for telemetry, some private mobile radio allocations, UMTS band one uplink at 1.92 to 1.98 GHz on its lower edge, and several industrial microwave allocations. A part matched across the whole window serves a product family rather than a single channel.

The parameter rows Hisiwell publishes for HXC40004

Part classGallium arsenide internally matched power transistor
Matching technique, as stated by the vendorIn-plane matching synthesis, thin film hybrid integration
Frequency range2.0 to 2.2 GHz
Bandwidth, calculated200 MHz, 9.52 per cent fractional at a 2.1 GHz centre
Output at 1 dB compression as publishedat least 42 dBm
Output at 1 dB compression in watts, calculated15.85 W
Saturation output power as publishednot published, the index prints a slash in that column
Gain as publishedat least 11 dB
Drain efficiency as publishedat least 45 per cent
Drain voltage10 V
Input and output impedance50 ohm, matched
Flatness across the bandplus or minus 0.8 dB
Operating modecontinuous wave
Drive power for the compression point, calculated31 dBm, 1.26 W
DC input at compression, calculated35.22 W
Drain current at compression, calculated3.52 A at 10 V
Dissipation at compression, calculated19.37 W
Dissipation if efficiency reaches 60 per cent, calculated10.57 W
Output per 100 MHz of the band, calculated7.92 W
Load voltage at compression into 50 ohm, calculated28.15 V RMS, 39.81 V peak
Thermal resistance, junction to casenot published
Package outline and dimensionsnot published in text
Scattering parametersnot published
Gate bias point and quiescent currentnot published
Operating and storage temperaturenot published
Orderable addendum, marking and packingnot published
Neighbour on the same rail at 40 dBm compression on 1.6 to 1.7 GHzHXC40003, 13 dB gain

Three and a half amperes at 10 volts

3.52 A is the highest current in the GaAs family on a 10 V rail, and it turns the supply into the first item on the list rather than the last. A buck converter that delivers 10 V at 4 A with a clean load transient is a different part from one that delivers 10 V at 1 A, and the difference shows up in cost, in board area and in the ripple that reaches the drain.

The current also sets the bias network. The drain feed has to carry 3.52 A with a voltage drop under a tenth of a volt, which means a wide track and more than one via per source pad. A feed that drops half a volt at full current loses five per cent of the output power before the radio frequency path is even considered, and it also shifts the bias point as the drive changes.

The 19.37 W of heat is moderate. On a 2 C per watt carrier the case rise is 39 C, which leaves room for a 25 C base plate. The temperature matters because the compression point moves with it, and the vendor publishes no curve. A part that delivers 42 dBm at 25 C typically loses between half a decibel and a decibel at 85 C, and if the system gain budget has no allowance for that, the link closes on the bench and fails in the field.

At 45 per cent efficiency the part is doing well for GaAs. A comparison with a GaN part on 28 V that quotes 60 per cent at saturation is not like for like, because this figure is at compression and that one at saturation. The honest comparison runs both parts at the same back off from their own compression points, and then the gap narrows.

The gain budget at eleven decibels

11 dB of gain means 1.26 W of drive for 15.85 W of output. That is a serious driver, and it is the reason this part is normally the second stage in a three stage line rather than the second stage in a two stage line. The driver has to deliver 31 dBm with its own gain and its own thermal path, and that driver is often a GaN part on 28 V because the current at 10 V would be large.

Low gain also means the input match matters less. A 1.5:1 input return loss costs about 0.2 dB of drive at this gain, which is tolerable, and the driver is less likely to be pulled by the load. Parts with 20 dB or more of gain demand a pad or an isolator in front to stay stable, and this part does not.

The published flatness of plus or minus 0.8 dB is a band edge figure across 200 MHz. A two stage line inherits the sum of both stages unless the driver is flatter, and a system with a fixed level plan should budget 1.2 dB for the pair rather than 0.8 dB for the output stage alone.

Linearity beyond the compression point is not published. A part with 45 per cent efficiency at compression is running close to class B, and the third order intercept is likely to sit around 8 to 10 dB above the compression point on a part of this class. That estimate is not a specification, and a multi-carrier application needs a two tone measurement before it is committed.

Where 2.0 to 2.2 GHz is used

S band around 2 GHz carries telemetry for launch vehicles and satellites, tactical data links, some radar and a growing number of industrial heating and sensing systems. The band is also close to the UMTS and LTE allocations at 1.9 to 2.1 GHz, which matters for products that have to coexist with cellular services rather than transmit in them.

In a telemetry transmitter the modulation is usually constant envelope and the part runs near compression, which is the case the 42 dBm figure describes. In a data link the modulation may be shaped and the part is backed off, which moves the operating point away from the published one and reduces the efficiency below 45 per cent.

In an industrial system the requirement is often a few watts into a cavity or an applicator with a poor match. A part rated at 15.85 W at compression has enough margin to survive a 2:1 mismatch at 10 W output, provided the reflected power is handled by a circulator and a load. The vendor publishes no load mismatch tolerance, so the circulator is not optional in that application.

Our guide to choosing an RF amplifier sets out the rail first sequence we use, and it explains why a 10 V part and a 28 V part of the same output are not interchangeable in a system that already has a supply.

Comparing HXC40004 with its neighbours

The HXC40003 covers 1.6 to 1.7 GHz at 40 dBm compression with 13 dB of gain on the same rail, so it delivers four decibels less output with two decibels more gain. The HXC40006 covers 2.7 to 3.4 GHz at 37 dBm saturation with 12 dB of gain, and the HXC40007 covers 3.1 to 3.5 GHz at 42 dBm saturation with 10.5 dB. Each member is a distinct window and none covers this band.

On the GaN side the HXNM40007 covers 4.4 to 5.0 GHz at 40 dBm with 26 dB of gain on 28 V, and the HXNM40003 covers 2.7 to 3.1 GHz at 36 dBm with 25 dB on the same rail. The GaN parts carry far more gain per stage, which reduces the parts count, and a higher rail, which decides whether the product can use them at all.

The choice between a 10 V GaAs part and a 28 V GaN part of the same output is usually made by the supply, not by the radio frequency figures. A vehicle or a battery product with a 12 V bus will find the 28 V rail expensive to generate at 3 A, and a rack product with a 28 V bus will find the GaN part easier because it draws a fifth of the current. Our RF component sourcing page sets out the questions we ask before quoting either family.

Questions buyers ask before ordering HXC40004

Is 42 dBm a saturation figure? No, it is 1 dB compression. The saturation column carries a slash. If the system needs a saturation number, it has to be measured, and the result is normally about a decibel above the compression figure.

Is there a data sheet? No. The vendor publishes an index row and a product page carrying the same electrical figures and the 50 ohm port impedance. There are no curves, no scattering parameters, no thermal data and no package drawing.

What has to be on the purchase order? The band, the 10 V rail, the continuous wave mode and the quantity. No orderable addendum, marking code or packing column is published, so reel size and moisture level come from the factory quotation.

How do we start? Send the band, the output point that matters, the drive available and the rail. We will confirm the fit against this part and its neighbours, quote from the current factory schedule and ship a sample with measured output at compression and gain at both band edges.