HX38300P
Product Specifications
HX38300P
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HX38300P from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HX38300P: 300 W over 1.8 GHz at 19 dB, and the 28 V option that doubles the current
The HX38300P is a gallium nitride power transistor on the 48 V side of the shelf covering 2 to 3.8 GHz with a 300 W row, 19 dB of gain and 75 per cent efficiency. The page calls it a high efficiency, high gain device available in an unflanged package and operating from either a 48 V or a 28 V supply, and publishes a maximum saturated power of 316 W and an optimal drain efficiency point of 73.5 per cent.
This is the one row in the batch where the page figure is above the index figure. 316 W against 300 W is 0.23 dB, which is small enough to be a measurement difference rather than a disagreement, and it is worth noting precisely because the rest of the shelf runs the other way. A buyer who expects every page to be more conservative than its row will be wrong here.
The 28 V option is the more consequential statement. The same output on a rail that is 1.71 times lower needs 1.71 times the current, and the whole supply, the bus bar and the decoupling have to follow.
The HX38300P rows as the vendor publishes them
| Part class | Gallium nitride power transistor, unflanged |
| Frequency range, index row | 2 to 3.8 GHz |
| Window width, calculated | 1.8 GHz |
| Band ratio, calculated | 1.9 to 1 |
| Saturation output, index row | 300 W, 54.77 dBm |
| Maximum saturated power, product page | 316 W, 55.00 dBm |
| Gap between the two, calculated | 0.23 dB above the row |
| Output per gigahertz of window, calculated | 166.7 W |
| Gain, index row | 19 dB |
| Drive at 19 dB, calculated | 3.78 W, 35.77 dBm |
| Drain efficiency, index row | 75 per cent |
| Optimal drain efficiency point, product page | 73.5 per cent |
| DC input at 300 W and 75 per cent, calculated | 400 W |
| Drain current at 48 V, calculated | 8.33 A |
| Drain current at 28 V, calculated | 14.29 A |
| Heat at either rail, calculated | 100 W |
| Supply, product page | 48 V or 28 V |
| Supply, index row | 48 V |
| Load voltage at 300 W into 50 ohm, calculated | 122.5 V rms, 173.2 V peak |
| Peak against a 48 V rail, calculated | 3.61 times |
| Peak against a 28 V rail, calculated | 6.19 times |
| Peak at a 2 to 1 mismatch, calculated | 346.4 V |
| Mode, index row | CW |
| Compression point for the rated figure | Not published |
| Package drawing and screw pattern | Not published, unflanged stated |
| Thermal resistance | Not published |
| Load impedance and load pull | Not published |
| Data sheet | No document linked from the page |
| Orderable addendum | None published |
| Packing quantity and moisture level | Not published |
| Applications listed | RF and microwave systems |
What the rail choice does to the board
At 300 W and 75 per cent the DC input is 400 W, which is 8.33 A on a 48 V rail and 14.29 A on a 28 V rail. The heat is 100 W either way, so the cooling does not change. What changes is everything between the connector and the drain: the bus bar cross section, the capacitor bank ripple current, the fuse, and the voltage drop across the bias feed, which at 14.29 A is five times more sensitive to a milliohm than it is at 8.33 A.
The output side is worse on 28 V. 300 W into 50 ohm is 173.2 V peak, which is 6.19 times a 28 V rail instead of 3.61 times a 48 V rail, and 346.4 V at a 2 to 1 mismatch. The load line is unchanged because the output power is unchanged, so the device sees the same voltage swing either way, but the margin between that swing and the rail is what the two rail options trade.
Practically, the 28 V option exists for platforms whose supply is already 28 V, which in radio and vehicle systems is common. Choosing it saves a converter and costs current. Choosing 48 V saves current and costs a converter. On a 300 W stage the current difference is 6 A and the converter is a real part, so the trade is not trivial either way.
Where 300 W over 1.8 GHz sits among the wideband rows
A 1.9 to 1 window at 3 GHz is a genuine wideband part, and the density figure shows it: 166.7 W per gigahertz of window against 370 W for the HX30370P on its 1 GHz window. The HX2040370P reaches 370 W over 2 GHz, which is 185 W per gigahertz, so on density the HX38300P is close and on absolute power it is 0.91 dB lower.
The gain is where this row wins. 19 dB against 18 dB on both of those neighbours looks like a small edge, but it is the reason the drive is 3.78 W rather than 5.86 W, and on a wideband stage the driver is often the part that limits the band. A 19 dB part with a 1.8 GHz window can be driven by a single small amplifier that also covers the window. A 18 dB part at the same window needs a driver that is 2 W larger, and at 3 GHz that is not free.
Page above row is the other thing to note, because it is the exception in this batch. Every other part here publishes a page figure at or below its index row. This one publishes 316 W against a 300 W row, and the 0.23 dB is inside what two different test benches would disagree by. Read it as a part that meets its row rather than one that is oversold, and note that the efficiency moves the other way: 73.5 per cent on the page against 75 per cent on the row, which is a 1.5 point spread in the direction of conservatism.
The pair of figures tells a buyer something useful about which measurement was taken where. Power was measured at a point the vendor considered representative and came out slightly above the class label. Efficiency was measured at the optimal point and came out slightly below the class label. Neither discrepancy changes a chassis decision, and together they suggest the row is a rounded summary rather than a separate test.
Where the HX38300P sits on the 48 V shelf
The nearest neighbours are the HX30370P at 370 W over 2 to 3 GHz with 18 dB and 78 per cent, and the HX2040370P at 370 W over 2 to 4 GHz with 18 dB and 70 per cent. The first is 0.91 dB more power on a window 0.8 GHz narrower, the second is 0.91 dB more power on a window 0.2 GHz wider and 5 points less efficient. The HX27240F is 240 W over 1.8 to 2.7 GHz, 1.13 dB lower and aimed at base stations rather than at instrumentation.
For a 2 to 3.8 GHz application the choice is between paying 0.91 dB for the extra 800 MHz of window or moving to a narrower part and accepting a band edge at 3 GHz. Where the band edge is fixed by a standard at 3.5 GHz or by a radar at 3.3 GHz, the window decides and the 0.91 dB is not a choice at all. The comparison with the drive figure for each row is on the RF power transistor cross reference page.
What an order for the HX38300P has to state, and what it cannot yet
No compression point, thermal resistance, package drawing, load pull or data sheet is published, and there is no orderable addendum, packing column or moisture level. The purchase order has to carry the part number, the window, the rail (48 or 28 V, and this one matters more than most), the operating point, the mounting since the part is unflanged, the quantity and the incoming test.
The incoming gate should record the drain current at the rated output on the rail the system will use, because the 8.33 A and 14.29 A cases come from the same part and only one of them describes the board. The incoming inspection plan page sets out the record, and where the chassis also needs its driver and its passives against one date, the RF component sourcing page covers the trace and the batch.
Questions buyers ask about the HX38300P
Is the page figure above the row? Yes, 316 W against 300 W, 0.23 dB. It is a measurement difference rather than a disagreement, and the efficiency moves the other way.
Can it run on 28 V? The page says 48 V or 28 V. On 28 V the current is 14.29 A instead of 8.33 A for the same 300 W, and the output peak is 6.19 times the rail.
Is it flanged? No, the page states an unflanged package. That changes the clamp, the thermal interface and the height above the board.
What is the heat load? 100 W at 300 W and 75 per cent, on either rail. The thermal resistance that would turn that into a case temperature is not published.