HX280028H
Product Specifications
HX280028H
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HX280028H from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HX280028H: twenty watts to eight gigahertz on 28 V
The HX280028H is the largest of the three small unmatched gallium nitride parts at the top of the Hisiwell 28 V shelf. The family index prints DC to 8 GHz, 20 W of saturation output and 28 V, with the gain, the efficiency, the average power and the package columns left blank and the mode column reading 7GHz. No data sheet is linked and no per part page resolves for the row.
Twenty watts is 43.01 dBm. The step down to the 10 W member is 3.01 dB and the step down to the 4 W member is 6.99 dB, so the three parts are a clean ladder in three decibel steps and a buyer can move along it without changing the level plan by more than one bit.
At this power the part is at the edge of what a small surface mount body can carry, which is why the thermal question matters more here than on the two members below it, and why the missing efficiency column is more expensive.
The HX280028H row and what it does not say
| Part class | Unmatched gallium nitride HEMT |
| Frequency range | DC to 8 GHz |
| Saturation output | 20 W |
| Saturation output in dBm, calculated | 43.01 dBm |
| Power gain | Not published, slash in the index column |
| Drain efficiency | Not published, slash in the index column |
| Average power column | Not published, slash in the index column |
| Drive power at saturation | Cannot be calculated without a gain figure |
| DC input at 40 per cent efficiency, calculated | 50.0 W, 1.79 A, 30.0 W of heat |
| DC input at 45 per cent efficiency, calculated | 44.4 W, 1.59 A, 24.4 W of heat |
| DC input at 50 per cent efficiency, calculated | 40.0 W, 1.43 A, 20.0 W of heat |
| DC input at 55 per cent efficiency, calculated | 36.4 W, 1.30 A, 16.4 W of heat |
| Drain rail | 28 V |
| Mode column in the index | 7GHz, a frequency note rather than a mode |
| Package | Not printed for this row |
| Matching | Unmatched, external network on the customer board |
| Load voltage at 50 ohm, calculated | 31.6 V RMS, 44.7 V peak |
| Thermal resistance, junction to case | Not published |
| Gate bias point and quiescent current | Not published |
| Operating and storage temperature | Not published |
| Orderable addendum, marking and packing | Not published |
| Data sheet | Not linked from the product page |
| Family siblings | HX280R48HS at 4 W, HX280018H at 10 W |
| Nearest part in another series | HXN50265, 20 W, DC to 8 GHz |
Twenty watts is where the efficiency column starts to cost money
At 40 per cent the drain draws 1.79 A and the heat is 30 W. At 55 per cent it draws 1.30 A and the heat is 16.4 W. That is nearly double the supply and nearly double the heatsink between the two readings, on a part whose power figure is only 20 W.
A buyer who sizes on the optimistic case builds a spreader for 16 W and then finds 30 W in it. The part does not fail immediately, it runs hot, and the operating life of a gallium nitride device at high junction temperature is the thing that gets shortened without anything showing on a bench test.
The voltage side is still comfortable: 43.01 dBm into 50 ohm is 31.6 V RMS and 44.7 V peak. That is inside the 50 V class, so the output network is ordinary and the constraint is current and heat rather than voltage.
The supply is a 2 A converter on the optimistic reading and a 2.5 A converter on the pessimistic one. Building the board for 2.5 A costs an inductor size and a few capacitors and removes the risk.
Twenty watts in a small body is also the point where the ground plane stops being a routing detail and becomes part of the circuit. The pad, the vias and the first shunt element form one network at eight gigahertz, and the heat path is the same copper.
On derating, a part quoted at twenty watts with no junction temperature and no thermal resistance has to be treated as a twenty watt part at a case temperature that the first article establishes. Running it at the case temperature of the 10 W member is how a wideband amplifier acquires a reputation for short life. A twenty watt part in a small body at eight gigahertz is also a part where the match and the ground are the same copper, so any change to the ground for thermal reasons moves the match and has to be measured again on the same fixture, at rated drive rather than at a milliwatt.
Twenty watts against the larger flanged members
| HX280028H | 20 W, DC to 8 GHz | 43.01 dBm | Not published | Reference point |
| HX280018H | 10 W, DC to 8 GHz | 40.00 dBm | Not published | 3.01 dB below |
| HXN50265 | 20 W, DC to 8 GHz | 43.01 dBm | Bare die family row | Same power, other series |
| HX0445 | 62 W, DC to 4 GHz | 47.92 dBm | 76.2 per cent | 4.91 dB above, band stops at 4 GHz |
| HX0625 | 34 W, DC to 6 GHz | 45.31 dBm | 80.2 per cent | 2.30 dB above, band stops at 6 GHz |
The 34 W member on the six gigahertz band gives 2.30 dB more output, a published gain of 18.5 dB and a published efficiency of 80.2 per cent, and it costs two gigahertz of band. That comparison is the strongest argument for asking the factory what this part actually does: one part has a full row of data and the other has a power figure.
If the application genuinely needs 8 GHz the choice is forced. If it needs 5 to 6 GHz, the 34 W member is a known quantity and this one is not, and a buyer with a schedule usually takes the known part.
The RF power transistor cross reference shows which rows carry a full set of published figures, and the RF component sourcing page covers how a part with missing data is qualified before a schedule is set.
Board notes for twenty watts in a small body
The ground plane is the whole job. At twenty watts in a small surface mount body the thermal pad, the via field and the first shunt capacitor are one structure, and a sparse via field turns into gain loss at 8 GHz and a hot spot at the same time.
The gate bias is unpublished. The negative rail is adjustable and clamped, and the sequencer is part of the first article because no bias window is printed.
The match covers eight gigahertz and the package is not even printed for this row, so the footprint comes from the factory rather than from a guess. A part measured in the wrong footprint is a part whose data cannot be repeated.
The heat is 16 to 30 W depending on the efficiency, so the spreader and the interface are sized for the pessimistic case and the case temperature is measured at rated output.
Questions buyers ask about HX280028H
What is the gain and the efficiency? Not published. Both columns print a slash, and there is no data sheet to fall back on, so both come from the factory or from a measurement.
What body is it in? Not printed. The 4 W member of the same family is an MMS five by four, and the 10 W and 20 W rows say nothing.
Is it pulsed or continuous wave? The mode column reads 7GHz, which is a frequency note. Treat the mode as unconfirmed.
Is it the same die as HXN50265? Both rows print 20 W and DC to 8 GHz, and the documents are silent. Ask before a second source is written into a bill of materials.
How do we start? Send the band, the output at the connector, the drive available and the ambient. We will get the gain, the package and the mode confirmed, quote from the factory schedule, and ship a sample with a bench measurement.