HX2040185P
Product Specifications
HX2040185P
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HX2040185P from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HX2040185P: 185 W over 2 to 4 GHz, and the 28 V sibling that carries the same power
The HX2040185P is a gallium nitride power transistor on the 48 V side of the shelf covering 2 to 4 GHz with a 185 W row, 18 dB of gain and 70 per cent efficiency. The page says the part has a point frequency peak power of 185 W and an application range of 2 to 4 GHz, with high efficiency, high gain and wide band characteristics, operating from a 28 V or a 48 V supply, and then publishes a maximum saturated power of 50.9 dBm with a best drain efficiency of 72.5 per cent.
185 W is 52.67 dBm, so the page figure of 50.9 dBm is 1.77 dB below its own row, and the same 50.9 dBm appears on the 370 W page next door. The two pages are a copy of each other with the row changed, which makes the HX2040185P page the more credible of the pair: 123 W is a plausible measurement for a 185 W class device at the defined point, whereas it is not for a 370 W one.
There is a second, cleaner piece of evidence. The same part exists on the 28 V table as HX2040185F at 185 W, 18 dB and 70 per cent on a 28 V rail. Same power, same gain, same efficiency, different rail and different suffix, which tells the buyer that the suffix marks the rail rather than the flange on this family.
The HX2040185P rows as the vendor publishes them
| Part class | Gallium nitride power transistor |
| Frequency range, index row | 2 to 4 GHz |
| Window width, calculated | 2 GHz |
| Band ratio, calculated | 2 to 1 |
| Saturation output, index row | 185 W, 52.67 dBm |
| Point frequency peak power, product page | 185 W |
| Maximum saturated power, product page parameter line | 50.9 dBm, which is 123.0 W |
| Gap between the row and the parameter line, calculated | 1.77 dB |
| Same parameter line on the 370 W page | Identical, 50.9 dBm and 72.5 per cent |
| Output per gigahertz of window, calculated | 92.5 W |
| Gain, index row | 18 dB |
| Drive at 18 dB and 185 W, calculated | 2.93 W, 34.67 dBm |
| Drain efficiency, index row | 70 per cent |
| Best drain efficiency, product page | 72.5 per cent |
| DC input at 185 W and 70 per cent, calculated | 264.3 W |
| Drain current in that case at 48 V, calculated | 5.51 A |
| Heat in that case, calculated | 79.3 W |
| DC input at 123 W and 72.5 per cent, calculated | 169.7 W |
| Heat in that case, calculated | 46.7 W |
| Supply, product page | 28 V or 48 V |
| Supply, index row | 48 V |
| Sibling on the 28 V table | HX2040185F, 185 W, 18 dB, 70 per cent, 28 V |
| Load voltage at 185 W into 50 ohm, calculated | 96.2 V rms, 136.0 V peak |
| Peak against a 48 V rail, calculated | 2.83 times |
| Peak at a 2 to 1 mismatch, calculated | 272.0 V |
| Mode, index row | CW |
| Compression point for the rated figure | Not published |
| Package drawing and mounting | Not published |
| Thermal resistance | Not published |
| Load impedance and load pull | Not published |
| Data sheet | No document linked from the page |
| Orderable addendum | None published |
| Packing quantity and moisture level | Not published |
| Applications listed | RF and microwave systems |
The suffix tells you the rail, not the flange
On this family the P and F suffixes mark the supply, and the cross check is the 28 V table: HX2040185F sits there at the same 185 W, 18 dB and 70 per cent that the P carries on the 48 V table. That is a coherent reading and it is confirmed by the HX30370P page calling a P part flanged and the HX38300P page calling a P part unflanged, which would be impossible if the letter marked the package.
For a buyer the practical value is that the rail is a purchasing decision, not a variant to discover after the first shipment. A 28 V platform takes the F, a 48 V platform takes the P, and the electrical performance is the same on paper. What changes is the current at the same output, 5.51 A on 48 V against 9.45 A on 28 V at 185 W and 70 per cent.
The flange still has to be settled, because neither page states it. The safe order line names the mounting in words and leaves the suffix for the rail.
What 185 W buys against the 370 W row on the same window
The two parts share the 2 to 4 GHz window, the 18 dB of gain and the 70 per cent efficiency. The difference is exactly 3.01 dB, which is a factor of two in power, and that is the whole choice. A single 370 W device replaces two 185 W devices plus a combiner, and costs 4.78 A of extra drain current at 48 V and twice the heat, 158.6 W against 79.3 W.
Where the system needs the power and has the cooling, one part is cheaper than two plus a combiner. Where the system is a modular array of 185 W amplifiers that are combined anyway, the smaller part is the building block and the 3.01 dB is spent at the next level up. Both routes end at the same antenna and neither is wrong.
The 185 W row has one quiet advantage on a wideband stage: at 2.83 times the rail its output peak is lower, 136.0 V against 192.4 V, so the passive parts and the connector around it can be a class smaller. That matters at 4 GHz, where a high voltage part is also a higher loss part.
Where the HX2040185P sits on the 48 V shelf
It is the smallest member of the 2 to 4 GHz pair and the second smallest of the 48 V group, above only the 240 W HX27240F on power density. Against the HX38300P at 300 W over 1.8 GHz with 19 dB and 75 per cent, it is 2.10 dB lower but covers 0.2 GHz more window and needs 0.85 W less drive. Against the HX30370P at 370 W over 2 to 3 GHz, it is 3.01 dB lower on a window that stops at 3 GHz.
Where the application is a driver for a 370 W stage, this part is the natural choice: 18 dB of gain at 185 W means 2.93 W of drive, which is inside the range of a small amplifier, and the pair of them covers 2 to 4 GHz with two parts and no driver chain in between. The comparison with the drive figure for each row is on the RF power transistor cross reference page.
What an order for the HX2040185P has to state, and what it cannot yet
No compression point, thermal resistance, package drawing, load pull, data sheet, orderable addendum, packing column or moisture level is published. The purchase order has to carry the part number with the rail variant, the window, the rail, the frequency inside the window at which the power is required, the mounting, the quantity and the incoming test.
The incoming gate should include the drain current at the rated output, because 5.51 A on 48 V and 9.45 A on 28 V come from the same 185 W row and only one of them describes the board. The incoming inspection plan page sets out the record, and where the same amplifier needs its driver and its passives against one date, the RF component sourcing page covers the trace and the batch.
Questions buyers ask about the HX2040185P
Is the page figure lower than the row? Yes, 50.9 dBm against 185 W, 1.77 dB. The page line is shared with the 370 W neighbour, so treat it as copied and ask for the condition.
What does the P mean? On this family it marks the 48 V version, with the F on the 28 V table carrying the same 185 W. It does not mark the flange, since P parts appear with both.
Can I use it as a driver for the 370 W part? Yes, 18 dB of gain at 185 W gives 2.93 W of drive, and the pair covers 2 to 4 GHz directly.
What is the heat load? 79.3 W at 185 W and 70 per cent, or 46.7 W at the page point of 123 W and 72.5 per cent. The thermal resistance that would settle the case temperature is not published.