Contact Us

VBC6N2022

Brand: VBsemi
VBsemi VBC6N2022 is a discrete semiconductors component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

VBC6N2022 — Discrete & Power Semiconductors | Superb Automation

VBC6N2022

VBsemi — Discrete & Power Semiconductors

Product Overview

The VBC6N2022 from VBsemi is a discrete power semiconductor delivering efficient switching and power conversion. VBsemi (微碧半导体) specializes in discrete MOSFETs, power transistors, and protection devices for power supplies, motor control, and consumer electronics.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

VBC6N2022: two N channels with their drains tied together

The VBC6N2022 is a common drain pair, two N channel devices sharing one drain connection inside a TSSOP8. The pair is rated at 20 V drain to source, plus or minus 20 V on the gate, with a threshold window of 0.5 to 1.5 V. Each half carries 6.6 A, and the on resistance is 32 milliohm at a 2.5 V gate and 22 milliohm at 4.5 V.

A common drain pair is not two switches in series in the usual sense. The shared drain means the two channels can be used as a bidirectional switch, as a battery protection pair with one device on each side of the pack, or as the two halves of a load path that has to block in both directions when both gates are off. The body diodes point in opposite directions from the shared node outward, which is exactly what makes the bidirectional block work.

The 20 V rating and the 0.5 to 1.5 V threshold window both point at the same place. This is a single cell or two cell battery part, a 5 V rail part, or a USB power path part. It is not a 12 V rail device, and the low threshold means it was meant to run from a logic pin or a charge pump output rather than from a 10 V gate driver.

Key data for the VBC6N2022

ConfigurationCommon drain, N plus N
PackageTSSOP8, 0.65 mm pitch
VDS20 V
VGSPlus or minus 20 V
Vth0.5 to 1.5 V window
ID per channel6.6 A
RDS(on) at 2.5 V32 milliohm
RDS(on) at 4.5 V22 milliohm
TechnologyTrench
Gate chargeNot published, request the data sheet for a switching budget
Body diodesTwo, opposed, which is what allows a bidirectional block
Channel matchingTwo halves on one die, so they track in temperature

A threshold window from 0.5 to 1.5 V is a warning, not a feature

The published threshold is a range rather than a number, and the range is wide. At the top of it a device needs 1.5 V to start conducting, which on a 3.3 V logic pin leaves 1.8 V of overdrive. At the bottom of it the same pin leaves 2.8 V. Both work, but the switching point moves by a volt between parts, and in a bidirectional pair that asymmetry shows up as a delay between one half turning on and the other.

The more serious reading of a low threshold is the sub threshold leakage at high temperature. A 20 V part with a 0.5 V worst case threshold can conduct measurable current at 85 C with the gate at zero, which in a battery path is drain current that never appears on any drawing. Ask for the leakage at the top of the temperature range, not at 25 C, before a pair like this is put on a pack that may sit for months.

Gate drive should come from a defined source with a resistor. Driving the gate directly from a microcontroller pin puts the pin outside its absolute maximum the first time the switch node couples into the gate trace, and a 1.5 V threshold part needs only a short spike to conduct.

The shared drain and what it does to the board

With both drains on the same lead frame the thermal resistance is shared, so if one half carries the load and the other sits off, the idle half still heats. That matters in a protection pair where one device carries the full pack current and the other only carries it in the reverse direction, because the rating is really the pair together and not one channel alone.

The 22 milliohm at 4.5 V gives 22 millivolt per amp, so a 3 A pack current drops 66 millivolt across one half and dissipates 198 milliwatt. Two halves conducting in the same path, which happens when the pack is both charging and the load is on, doubles it. In a TSSOP8 that is still inside what the body can shed, but it is the sum that has to be computed, not the single channel figure.

On the board side the shared drain pin is the one to keep short and wide, because both channels return through it. A thin trace there adds resistance in series with both halves and makes the on resistance look worse than the die actually is.

Where a common drain pair gets chosen over two singles

The usual reason is space. Two discrete devices in TSSOP8 take two bodies, two placement positions and two sets of gate resistors; the pair takes one body and one gate network per side. At volumes where board area is the constraint, that difference is worth more than the small penalty in resistance. The one stop BOM sourcing page covers how a bill of material is consolidated when several of these small switches sit on one board.

The other reason is matching. Two halves on one die track each other over temperature, so a protection circuit that compares the two halves does not have to allow for a thermal offset between them. That is worth more than a marginal resistance advantage when the circuit is a comparator based cut off rather than a controller with its own reference.

The sourcing side of this part is covered on the BOM shortage recovery. For a pair that sits in the battery path of a shipping product, that page covers how a line is kept running when one code goes short.

Questions we get on this code

Is the pair usable as a load switch on its own? One half yes, both halves no. Using both in series doubles the resistance and the drop, and gains nothing unless the circuit needs to block in both directions.

What is the real current limit? 6.6 A is a package claim at a 25 C case. On a 3 A continuous path the pair is fine in still air, and above that the sum of both halves has to be compared against the thermal resistance of the body on the actual copper.

Can it be driven from a 1.8 V rail? Only if the data sheet curve at 1.8 V shows an acceptable resistance, which the catalogue does not publish. At 1.8 V and a 1.5 V worst case threshold there is 0.3 V of overdrive, which is not enough to call a switch closed.

What is the usual reel? The TSSOP8 body normally ships 3000 pieces on a large reel and 250 on a small one for prototypes. We confirm the reel and the date code on the quotation.