HX0625
Product Specifications
HX0625
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HX0625 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HX0625: thirty four watts over DC to 6 GHz on 28 V
The HX0625 is an unmatched gallium nitride HEMT power transistor from Hisiwell for the DC to 6 GHz window on a 28 V rail. The family index prints 34 W of saturation output, 18.5 dB of gain and 80 per cent drain efficiency. The product page names the bodies HX0625F2 for the flanged outline and HX0625P2 for the flangeless one, prints 34 W as the maximum saturated power and 80.2 per cent as the best drain efficiency, and states pulsed or continuous wave operation.
Thirty four watts is 45.31 dBm. Eighteen point five decibels of gain puts the drive at 26.81 dBm, which is 0.48 W, so a half watt driver brings this part to saturation. That is the middle of the shelf in every sense: twice the output of the 16.6 W member, half the output of the 65 W member, and a drive level that a single packaged amplifier covers.
The band is DC to 6 GHz, which is the widest absolute span on the shelf for a part above 30 W. The 4.4 to 6 GHz members are band limited to the top of that range and print 55 per cent efficiency; this part holds 34 W across the whole span at 80 per cent.
The rows published for HX0625
| Part class | Unmatched gallium nitride HEMT power transistor |
| Frequency range | DC to 6 GHz |
| Saturation output | 34 W |
| Saturation output in dBm, calculated | 45.31 dBm |
| Power gain | 18.5 dB |
| Drive power at saturation, calculated | 26.81 dBm, 0.48 W |
| Best drain efficiency, product page | 80.2 per cent |
| Drain efficiency, family index | 80 per cent |
| DC input at 80.2 per cent, calculated | 42.4 W |
| Drain current at 28 V, calculated | 1.51 A |
| Dissipation at saturation, calculated | 8.4 W |
| Drain rail | 28 V |
| Operating mode | Pulsed or continuous wave, as stated on the product page |
| Bodies | HX0625F2 flanged, HX0625P2 flangeless |
| Matching | Unmatched, external network on the customer board |
| Scattering parameters | Not published in text |
| Load voltage at 50 ohm, calculated | 41.2 V RMS, 58.3 V peak |
| Output per GHz of band, calculated | 5.7 W per GHz |
| Thermal resistance, junction to case | Not published |
| Gate bias point and quiescent current | Not published |
| Operating and storage temperature | Not published |
| Orderable addendum, marking and packing | Not published |
| Shelf neighbour below, same band | HX0610, 16.6 W, 21 dB, 80.2 per cent |
| Shelf neighbour above, same band | HX0635, 42 W, 17.8 dB, 82 per cent |
One and a half amps and eight watts of heat
At 80.2 per cent the DC input is 42.4 W, the drain current is 1.51 A at 28 V, and the heat is 8.4 W. That is twice the heat of the 16.6 W member and a third of the 126 W member, and it sits in the range where a die cast enclosure with fins works without forced air.
The supply is a 2 A converter. The drain feed is a 100 mil trace at one ounce, the choke is a small component, and the decoupling bank is four or five capacitors rather than the dozen a 6 A part needs.
The output match sees 58.3 V peak, which is just above the comfortable 50 V class. A 100 V capacitor in the shunt position and a 50 V part in series with margin is the usual compromise, and the choice at 6 GHz is narrow enough that the voltage rating often decides the part number.
The drive is 0.48 W. A packaged amplifier at 27 dBm covers it, and if that driver is on the same board it can share the 28 V rail with its own gate bias.
Five and seven tenths watts per gigahertz is the density of this member across six gigahertz, and it is only a third of the 126 W part on a narrower band. The trade is deliberate: less power over more band, which is what a wideband link or an instrument amplifier needs. The 62 W member on the four gigahertz band prints 15.5 W per gigahertz, so the two are within reach of each other in density and are separated mainly by the top two gigahertz.
The step to the 42 W member is 0.92 dB, which is under a fifth of a doubling, so the two are close enough that a buyer should ask for both on the same quotation and take whichever the factory has on the shelf. On a schedule that is often the deciding fact.
HX0625 in the thirty to sixty watt band
| HX0635 | 42 W | 17.8 dB | 82 per cent | 0.92 dB above, 0.7 dB less gain |
| HX0625 | 34 W | 18.5 dB | 80.2 per cent | Reference point |
| HX0610 | 16.6 W | 21 dB | 80.2 per cent | 3.11 dB below, 2.5 dB more gain |
| HX0445 | 62 W, DC to 4 GHz | 17.4 dB | 76.2 per cent | 2.61 dB above, band stops at 4 GHz |
| HX0465F2 | 65 W, DC to 4 GHz | 13.6 dB | 71 per cent | 2.81 dB above, dual rail |
The 42 W member is 0.92 dB above this one, which is a fifth of a doubling, and it takes 0.7 dB of gain. Two parts that close together usually come down to stock and price rather than to the data sheet.
The 62 W and 65 W members give 2.6 and 2.8 dB, which is a real doubling, and they stop at 4 GHz. A transmitter that has to work to 5.8 GHz cannot use them, and one that only works to 3 GHz does not need the six gigahertz span of this part.
The RF power transistor cross reference carries the band edge for each member, and the one stop RF supply page covers the driver and the passives as a kit.
Board notes for a six gigahertz unmatched part
The gate bias is unpublished, so the negative rail, the clamp and the sequence are built to be adjustable and the quiescent point is set on the first article. At 1.5 A a wrong quiescent setting is a hot part rather than a destroyed one, but it still has to be measured.
The match covers six gigahertz, which is where the flange, the bond wire and the first shunt capacitor become one network. Without published scattering parameters the input match is measured rather than computed, and the output match is trimmed at the top of the band because that is where the loss appears first.
The drain feed carries 1.51 A and has to be choked so the output does not travel back along the supply. At 6 GHz the choke is short and the capacitor at the flange is small, so the placement matters more than the values.
Eight watts of heat in a flange is a spreader and a finned wall. The interface is a thin film and the joint is bolted, and the case temperature at rated output closes the thermal question because no junction to case figure is published.
Questions buyers ask about HX0625
Is 80 per cent efficiency a band figure? The vendor prints one best figure, 80.2 per cent, and no curve, so the number is a peak. At 6 GHz the efficiency will be lower and the heat higher than 8.4 W.
Is there a compression point? No. Saturation only, with pulsed or continuous wave stated, so a linear point is measured on the first article.
Does it really cover from DC? The index prints DC to 6 GHz, which describes the die and not the match. The lower edge of the usable band is set by the network on the board, and a match tuned for 4 to 6 GHz will not work at 100 MHz.
Which body do we order? HX0625F2 flanged for a bolted spreader, HX0625P2 flangeless for a solder down carrier.
How do we start? Send the band, the output at the connector, the duty, the ambient and the rail. We will confirm the member, quote from the factory schedule, and ship a sample with data at 1, 3 and 6 GHz.