Contact Us

HX0620

Brand: Hisiwell
Hisiwell HX0620 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HX0620 — Discrete & Power Semiconductors | Superb Automation

HX0620

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HX0620 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HX0620: a 6 GHz row that publishes two different power figures

The HX0620 is a gallium nitride power transistor in the Hisiwell 50 V shelf listing, filed on a DC to 6 GHz window at 20 W with 19 dB of gain, 76 per cent efficiency, a 48 V rail and continuous wave mode. The product page behind the row says something else: 34 W of maximum saturated power, 80.2 per cent of best drain efficiency, and a 28 V supply. Both statements sit on the same vendor site and neither is marked as superseding the other.

The gap is not small. 20 W is 43.01 dBm and 34 W is 45.31 dBm, so the two figures are 2.30 dB apart, which is a factor of 1.7 in power. A rail difference from 48 V to 28 V changes the load line, the peak swing and the drive requirement at the same time. A buyer who reads only the index page will size a 48 V feed and a driver for 20 W; a buyer who reads only the product page will size a 28 V feed and a driver for 34 W. Both cannot be right.

On a row like this the safe reading is that the index table is a family summary and the product page is older prose, and that neither can settle an order. The only document that settles it is the data sheet, and no data sheet is linked from the page. The enquiry should ask for the sheet and for a written confirmation of the rail and the saturation figure before a price is treated as meaningful.

The HX0620 rows as the vendor publishes them

Part classGallium nitride power amplifier transistor, flanged and unflanged body
Frequency range, product pageDC to 6 GHz
Frequency range, index rowDC to 6 GHz
Saturation output, index row20 W
Saturation output, product page34 W maximum saturated
Difference between the two, calculated2.30 dB
20 W in dBm, calculated43.01 dBm
34 W in dBm, calculated45.31 dBm
Gain, index row19 dB
Drain efficiency, index row76 per cent
Drain efficiency, product page80.2 per cent best
Drain rail, index row48 V
Drain rail, product page28 V
Mode, index rowContinuous wave
Mode, product pagePulsed or continuous wave
Load voltage at 20 W into 50 ohm, calculated31.6 V RMS, 44.7 V peak
Load voltage at 34 W into 50 ohm, calculated41.2 V RMS, 58.3 V peak
Peak swing against a 28 V rail at 34 W, calculated2.08 times
DC input at 20 W and 76 per cent, calculated26.3 W, 0.55 A on a 48 V rail, 6.3 W of heat
DC input at 34 W and 80.2 per cent, calculated42.4 W, 1.51 A on a 28 V rail, 8.4 W of heat
Package and bodyFlanged and unflanged versions, sizes not published
Thermal resistance, junction to caseNot published
Load impedance at the outputNot published, no load pull table
Applied application listRF and microwave systems
Data sheet link on the product pageNone, the parameter block is two bullet lines
Orderable addendum and packingNone published

Which number the amplifier should be built on

Where two vendor figures disagree by 2.30 dB, the amplifier should be built on the lower one until the factory confirms otherwise. That rule is not conservatism for its own sake. A 34 W assumption on a part that delivers 20 W leaves an amplifier 2.3 dB short of its rated output, and because the last 2 dB of output is what an operator notices first, the shortfall surfaces in acceptance rather than in the lab.

The rail question is harder. If the part is a 28 V die, running it at 48 V would put the drain well past its intended bias and the load line would move with it. If it is a 48 V die, a 28 V supply leaves the peak swing compressed against the rail and the maximum output drops by more than the ratio suggests. Nothing published resolves this, and a bias board built for the wrong rail is the most expensive mistake in the sequence because it can destroy a batch of parts before anyone sees a spectrum.

The efficiency figures are closer and can be reconciled. 76 per cent on the index row and 80.2 per cent on the page are both plausible for a 6 GHz GaN part at different points on the load line, and the difference is only 0.4 dB of DC input. The heat budget can be built on the lower figure and the error stays inside the margin of a normal heat sink calculation.

What a 6 GHz window does to the network

DC to 6 GHz is the widest window on this shelf. No single network covers it, and no vendor claims one does. In practice a part on this row is used inside one band between 500 MHz and 6 GHz, and the network is built for that band with the rest of the window left as an operating limit rather than as usable bandwidth.

At 6 GHz the wavelength on a typical board material is short enough that a few millimetres of track changes the impedance by a visible amount. A network that works on a bench with a coaxial transition will not necessarily work on a board with a long feed to the transistor, and the difference shows up as a gain slope across the band rather than as a flat loss. That is why a part in this window is normally qualified on the actual board and not on a test fixture borrowed from another programme.

The upside of the wide window is procurement. One row covers 5.8 GHz links, 2.4 GHz industrial links and 900 MHz systems, so a contract builder that assembles several radios can hold one part number across them. The cost is that each programme carries its own tuning pass, and that cost has to be counted when the part price is compared with a band specific alternative.

Where the HX0620 sits on the shelf

The nearest row is the HX0645 at 45 W on the same DC to 6 GHz window, with 18 dB and 75 per cent printed and a product page that says 55 W maximum saturated with 68 per cent best efficiency and either a 48 V or a 28 V supply. That row carries its own internal disagreement, but the two rails are at least named as an option, which is more than this row offers.

Above both of them the shelf is empty at 6 GHz until the matched parts at 5 to 6 GHz, which publish 16 dB and 55 per cent at 30 W. Those parts are narrower, matched and fully specified, and for a fixed 5.8 GHz link they are the easier choice. The unmatched 6 GHz rows exist for the programme that has to move inside the window, and within that group the 20 W row is the entry point.

On power alone this part is the smallest 6 GHz member, so a programme that starts here and grows will move to the 45 W row and then to a matched part. That path is worth planning before the first board is cut, because it decides the driver headroom and the heat sink pattern that will be needed later. The full comparison sits on the RF power transistor cross reference page.

What an order for the HX0620 has to state, and what it cannot yet

The page publishes no orderable addendum, no packing quantity, no marking and no moisture level. The order has to name the part, the variant, the quantity, the band, the mode, the rail and the bias condition. The variant matters on this row more than usual, because the page states that both a flanged and an unflanged body exist and never says which code carries which. A line that reads only HX0620 leaves the body open, and the body decides the mounting and the thermal path.

The rail has to be settled in the same message. Asking for a quote without stating 28 V or 48 V invites a price for one variant and a delivery for the other, and the error only appears when the bias board is built. The factory confirmation should state the rail, the saturation power, the gain at the band of use and the efficiency at the same point, and it should be in writing.

Lead time and minimum quantity are not published either. Nothing on the page supports a schedule, so a delivery promise has to wait for a factory reply. A distributor that quotes a date without that reply is quoting a guess.

Questions buyers ask about the HX0620

Is the part 20 W or 34 W? Both figures are on the vendor site and they are 2.30 dB apart. Until the data sheet or a written factory confirmation arrives, the conservative planning figure is 20 W and the rail question stays open, because the 34 W figure is published against a 28 V supply and the 20 W figure against 48 V.

Which body do I order? The page states that a flanged and an unflanged version exist, which is normal for a part in this class, but it does not map the suffixes to the bodies. On an unflanged part the thermal path goes through the board and the via field; on a flanged part it goes through the flange and the heatsink. The choice changes the board, so it should be made before the artwork is released.

Can it run pulsed above the continuous figure? The page says pulsed and continuous wave are both supported and publishes no pulse width, no duty cycle and no peak figure. That is enough to know pulsed use is not excluded and not enough to quote a pulse rating. Any pulse requirement has to be confirmed against a stated width and duty.

How is the part supplied and checked? Through a channel with an unbroken batch trace, with an incoming check on marking, body and a curve trace at the intended band. The RF component sourcing page describes the chain, and where a bill mixes these parts with drivers and passives the one stop RF supply page covers the consolidation.