HX0610
Product Specifications
HX0610
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HX0610 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HX0610: sixteen watts over DC to 6 GHz with twenty one decibels of gain
The HX0610 is an unmatched gallium nitride HEMT power transistor from Hisiwell for the DC to 6 GHz window on a 28 V rail. The family index prints 16 W of saturation output, 21 dB of gain and 80 per cent drain efficiency. The product page names the two bodies HX0610F2 for the flanged outline and HX0610P2 for the flangeless one, prints 16.60 W as the saturated power and 80.2 per cent as the saturated drain efficiency, and states pulsed or continuous wave operation.
Sixteen watts is 42.04 dBm, and the page figure of 16.60 W is 42.20 dBm, a sixth of a decibel apart. Twenty one decibels of gain is the highest on this shelf apart from the larger wideband members, and it puts the drive at 21.04 dBm, which is 127 mW. That is a level a single small signal amplifier reaches, so this part can be driven from a synthesizer chain without a dedicated driver board.
The band is the whole DC to 6 GHz range, which in one device covers the 2.4 GHz ISM band, the 5.8 GHz band used for image transmission and the lower C band links. A single part covering that span at 16 W is the reason this member exists in a catalogue that already has a 34 W and a 42 W part on the same band.
What the HX0610 documents print
| Part class | Unmatched gallium nitride HEMT power transistor |
| Frequency range | DC to 6 GHz |
| Saturation output, family index | 16 W |
| Saturation output in dBm, calculated | 42.04 dBm |
| Saturated power on the product page | 16.60 W, 42.20 dBm |
| Power gain | 21 dB |
| Drive power at saturation, calculated | 21.04 dBm, 127 mW |
| Saturated drain efficiency, product page | 80.2 per cent |
| Drain efficiency, family index | 80 per cent |
| DC input at 80.2 per cent, calculated | 20.7 W |
| Drain current at 28 V, calculated | 0.74 A |
| Dissipation at saturation, calculated | 4.1 W |
| Drain rail | 28 V |
| Operating mode | Pulsed or continuous wave, as stated on the product page |
| Bodies | HX0610F2 flanged, HX0610P2 flangeless |
| Matching | Unmatched, external network on the customer board |
| Scattering parameters | Not published in text |
| Load voltage at 50 ohm, calculated | 28.8 V RMS, 40.7 V peak |
| Output per GHz of band, calculated | 2.8 W per GHz |
| Thermal resistance, junction to case | Not published |
| Gate bias point and quiescent current | Not published |
| Operating and storage temperature | Not published |
| Orderable addendum, marking and packing | Not published |
| Shelf neighbour above, same band | HX0625, 34 W, 18.5 dB, 80.2 per cent |
| Shelf neighbour, wider power | HX056010F5, 10 W, 10 dB, 0.5 to 6 GHz, plastic body |
Four watts of heat and three quarters of an amp
At 80.2 per cent the DC input is 20.7 W, the drain current is 0.74 A at 28 V, and the heat is 4.1 W. That is a part a small aluminium block will cool without a fan, and it is the reason this member is used in sealed enclosures where a fan is not an option.
The supply is under an amp, so a 1.5 A converter with a small inductor is enough and the switching residue is easy to filter. The drain feed can be a 50 mil trace at one ounce, and the choke is a small wire wound part rather than the heavy component the 138 W member needs.
The output match sees 40.7 V peak into 50 ohm, which is inside the range of ordinary 50 V and 100 V capacitors. That matters at 6 GHz, where the choice of 100 pF parts is thin and the voltage rating is often the last column anyone reads.
Four watts of heat in a flange is also the point where the interface material matters more than the fin area. A dry joint or a thick pad adds more thermal resistance than the difference between two heatsink sizes.
Two point eight watts per gigahertz is a low density across a six gigahertz band, which is exactly why the match is the hard part and the heat is not. The engineering hours on this part go into the network, not into the spreader. On a bench the part is quiet, cool and well behaved, and the only thing that can go wrong is a match that looks fine on a vector analyser at low power and shifts at forty decibels of drive. Twenty one decibels of gain means the input sees a fraction of a watt, so the shift is small, but it is worth measuring at rated output rather than at a milliwatt.
HX0610 against the other DC to 6 GHz members
| HX0635 | 42 W | 17.8 dB | 82 per cent | 4.19 dB above, 3.2 dB less gain |
| HX0625 | 34 W | 18.5 dB | 80.2 per cent | 3.27 dB above, 2.5 dB less gain |
| HX0610 | 16.6 W | 21 dB | 80.2 per cent | Reference point |
| HX056010F5 | 10 W | 10 dB | 55 per cent | 2.20 dB below, 11 dB less gain, plastic body |
| HX446030F2 | 30 W, 4.4 to 6 GHz | 14 dB | 55 per cent | 2.57 dB above, 7 dB less gain, band limited |
The 34 W member gives 3.27 dB more output and takes 2.5 dB of gain away, so a line up that uses this part and then upgrades to the 34 W member needs a driver that is 2.5 dB stronger. The 42 W member gives 4.19 dB and takes 3.2 dB.
The plastic 10 W member is the interesting comparison: it gives up 2.2 dB of output and 11 dB of gain, and it is the part the vendor positions for unmanned aerial vehicle image transmission. Where the flange and the 21 dB of gain are not needed, that part is cheaper, and where the gain is what closes the line up, this one wins on a single stage.
The RF power transistor cross reference lists the six gigahertz members with their gain, and the RF component sourcing page covers the small signal chain that drives them.
Board notes at twenty one decibels of gain
Twenty one decibels of gain is enough that the part will amplify whatever arrives at its input, including the leakage from its own output through a poor shield. The input and output have to be separated by a wall or by distance, and the drain feed has to be choked so the output does not travel back along the supply.
The gate bias is unpublished. A negative rail with a clamp, sequenced before the drain, is the arrangement, and the quiescent point is set on the first article because no current is quoted.
The match covers six gigahertz, which is a wider span than any of the higher power members and the hardest part of the board. Without published scattering parameters the input network is measured, and at 6 GHz the parasitic of the flange and the bond wires are inside the match rather than outside it.
At 4.1 W of heat the thermal path is a convenience rather than a problem, but the junction temperature still has to be closed with a measurement, because the vendor publishes no junction to case figure.
Questions buyers ask about HX0610
Is 16 W or 16.6 W the output? The index says 16 W and the product page says 16.60 W saturated. Both are carried here and the difference is a sixth of a decibel.
Can it be pulsed? The page states pulsed or continuous wave. No duty or pulse width is published, so a radar or a time division application needs the factory to confirm the duty before the part is committed.
Why does the plastic part have half the gain? Because a plastic body and a different die go together. The 10 dB member is the low cost part for a short link, and this one is the higher gain part for a longer line up.
Which body do we order? HX0610F2 flanged for a bolted spreader, HX0610P2 flangeless for a solder down carrier.
How do we start? Send the band, the output at the connector, the duty, the ambient and the rail. We will confirm the member, quote from the factory schedule, and ship a sample with data at 1, 3 and 6 GHz.