Contact Us

HX056010F5

Brand: Hisiwell
Hisiwell HX056010F5 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HX056010F5 — Discrete & Power Semiconductors | Superb Automation

HX056010F5

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HX056010F5 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HX056010F5: ten watts from half a gigahertz to six gigahertz in a surface mount body

The HX056010F5 is a gallium nitride HEMT power transistor from Hisiwell built on a 0.5 micrometre process and aimed at the 0.5 to 6 GHz window on a 28 V rail. The vendor states more than 10 W of output across that band, 10 dB of power gain and 55 per cent typical drain efficiency, with both of those last two figures measured at 5.8 GHz. The body is a 4 mm by 4.5 mm DFN, which is a surface mount package rather than a flanged ceramic pill.

One point has to be settled before anything else. The product overview calls this part pre-matched, and the vendor files it in the unmatched 28 V table with the rest of the band. Pre-matched and unmatched are not the same purchase: a pre-matched part carries internal matching on the die and an unmatched part needs the network built on the customer board. The two statements cannot both be exactly true, so the page carries both and treats the match as a question for the factory rather than an assumption.

Ten watts is 40.00 dBm. With 10 dB of gain the drive at saturation is 30.00 dBm, which is 1 W. That is a level a driver stage reaches on its own, so the line up in front of this part is two stages rather than three. The band is 5.5 GHz wide, which is 1.8 W per gigahertz of band, and that is the number that separates this part from the narrow band members of the same shelf.

The 4 mm by 4.5 mm outline is 18 square millimetres. A part that leaves 8.2 W of heat through that footprint has no room for a bolted spreader, so the thermal path is the board: a thermal pad, a via field under the die, and copper on the far side. That is the single most common reason this class of part fails in the field, and it is a board question rather than a device question.

The parameter rows behind the HX056010F5

Part classGallium nitride HEMT power transistor, pre-matched in the overview and filed under the unmatched table
Process0.5 micrometre GaN HEMT
Frequency range0.5 to 6 GHz
Saturation output, index row10 W
Saturation output in dBm, calculated40.00 dBm
Output wording in the overviewMore than 10 W across the band
Power gain10 dB at 5.8 GHz
Drive power at saturation, calculated30.00 dBm, 1.00 W
Typical drain efficiency55 per cent at 5.8 GHz
DC input at 55 per cent, calculated18.2 W
Drain current at 28 V, calculated0.65 A
Dissipation at saturation, calculated8.2 W
Drain rail28 V
Operating modeContinuous wave, pulse or any modulated signal
Body4 mm by 4.5 mm DFN, surface mount
Footprint area, calculated18 square millimetres
Load voltage at 50 ohm, calculated22.4 V RMS, 31.6 V peak
Output per GHz of band, calculated1.8 W per GHz
Band edges in gain and efficiencyNot published, both figures are quoted at 5.8 GHz only
Input and output impedanceNot published in text
Scattering parametersNot published in text
Gate bias point and quiescent currentNot published
Thermal resistance, junction to caseNot published
Orderable addendum, marking and packingNot published
Gain and efficiency at 0.5 GHz and at 6 GHzNot published

One watt of drive, eight watts of heat and eighteen square millimetres of board

The DC budget is modest: 18.2 W at 55 per cent, 0.65 A on the 28 V rail, 8.2 W of heat. On a bench that is a small supply and a small choke. In a box it is a different question, because 8.2 W through a DFN thermal pad is a heat flux of about 0.46 W per square millimetre, which is high for a laminate board and normal for a metal backed one.

A 0.65 A drain is a narrow trace. At one ounce copper a 30 mil trace carries that with little rise, and the feed network can be built on the same layer as the output match without a second copper weight. The amplifier is therefore cheap to build and expensive to cool, which is the opposite of the high power members of the same shelf.

At the output, 10 W into 50 ohm is 22.4 V RMS and 31.6 V peak. That is inside the rating of ordinary 50 V surface mount capacitors, so the output network does not need the high voltage parts used above 100 W. A standing wave of two to one raises the peak to about 44.7 V, which is still inside that window but close to the top of a 50 V part at temperature.

The 5.5 GHz of band is the part that shapes the board. A single section match cannot hold 10 dB of gain over nine octaves, so the network is either a broadband tapered line or a compensated two section match, and the loss of that network at 6 GHz sits directly on the 10 dB figure. The vendor quotes gain at 5.8 GHz, not at the band edges, so the loss at 6 GHz has to be measured on the first article rather than inferred.

HX056010F5 against the wider members of the shelf

HX056010F50.5 to 6 GHz10 W10 dB55 per centReference point, 5.5 GHz of band
HX0610DC to 6 GHz16 W21 dB80 per cent2.04 dB above, 11 dB more gain, one rail, unmatched
HX0625DC to 6 GHz34 W18.5 dB80 per cent5.31 dB above, band starts at DC
HX0635DC to 6 GHz42 W17.8 dB82 per cent6.23 dB above, largest of the six gigahertz group
HX0445DC to 4 GHz62 W17.4 dB76 per cent7.92 dB above, band stops at 4 GHz
HX1020120P21 to 2 GHz140 W20 dB80 per cent11.46 dB above, one gigahertz of band
HX446030F24.4 to 6 GHz30 W14 dB55 per cent4.77 dB above, same efficiency, narrower band

The HX056010F5 is the smallest and the broadest part on the 28 V shelf. Its nearest neighbour in band is the HX0610 at 16 W and 21 dB of gain, which is 2 dB more output and 11 dB more gain in the same 6 GHz window, so on a level plan the HX0610 wins on every row except efficiency per watt of drive. The reason to pick the HX056010F5 is not the data sheet, it is the package: a DFN that a pick and place machine can place, against a flanged pill that has to be bolted and hand soldered.

That difference matters at volume. A DFN part runs on a reflow line with the rest of the board, needs no torque specification, no thermal compound and no screw, and its repeatability comes from the stencil rather than from the operator. A bolted part needs a spreader, a torque value and a flatness figure, and the same unit built twice by two people gives two different case temperatures.

Against the narrow band members the trade is the other way. The HX1020120P2 gives 11.5 dB more output on 1 to 2 GHz, but it covers one gigahertz, and a product that has to work from 0.5 to 6 GHz cannot use it without a band switched line up. The RF power transistor cross reference lists the whole shelf by band and power so the comparison is done once, and the one stop RF supply page covers buying a multi stage line up as one kit rather than part by part.

Board notes for a four by four and a half millimetre DFN

The thermal pad is the first item. A DFN with 8.2 W of dissipation wants a via field under the pad, vias on a 0.5 mm to 0.8 mm pitch, tented on the far side or plugged, and copper on the far side at least as large as the pad. Without that field the junction runs hot, the gain falls and the part eventually fails at a power level well below its rating.

Solder voiding is the second. A pad this size with a stencil aperture at 50 per cent coverage gives a repeatable joint; a solid aperture gives a part that floats and tilts. The vendor publishes no reflow profile for this part, so the profile of the assembly house applies and the void percentage is measured by X-ray on the first article rather than assumed.

The bias line is the third. No gate voltage, no quiescent current and no bias sequence is published. A GaN HEMT of this class wants the negative gate present and clamped before the drain rises and the drain removed before the gate falls. On a surface mount part the sequencer is a small circuit on the same board, and the clamp is a zener or an active clamp at the gate, not a resistor.

The input match is the fourth. If the part is truly pre-matched, the input is close to 50 ohm over part of the band and the driver sees a mild load. If it is unmatched, the input impedance swings across nine octaves and the driver sees a load it was not specified for. That is the one question this page cannot answer from the vendor text, and it is worth a written confirmation before a board is committed.

Questions buyers ask about HX056010F5

Is it matched or unmatched? The overview says pre-matched and the vendor catalogue files it under the unmatched 28 V table. We quote it as pre-matched on the vendor wording and we ask the factory to confirm in writing, because the answer decides whether the customer builds an input network.

What is the gain at 0.5 GHz? Not published. The vendor quotes 10 dB at 5.8 GHz, and gain falls towards the top of the band, so the low end is expected to be higher. That is an expectation, not a specification, and it is measured on the first article.

Can it run a modulated signal? The vendor states CW, pulse or any modulated signal. There is no compression point and no linearity figure in the text, so a modulated application needs an operating point backed off from saturation and measured, not read from a table.

What package do we buy? There is one body, the 4 mm by 4.5 mm DFN. There is no flanged or flangeless option and no published reel size, so the packing has to be confirmed on the purchase order.

How do we start? Send the band edges, the output wanted at the connector, the signal type, the ambient and the rail. We will confirm the match condition with the factory, quote from the current schedule and ship a sample with measured gain at the two band edges.