Contact Us

HX04100F2

Brand: Hisiwell
Hisiwell HX04100F2 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HX04100F2 — Discrete & Power Semiconductors | Superb Automation

HX04100F2

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HX04100F2 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HX04100F2: one hundred and twenty six watts across DC to 4 GHz at eighty per cent

The HX04100F2 is the largest member of the Hisiwell unmatched gallium nitride shelf that still covers the whole DC to 4 GHz window. The family index prints 126 W of saturation output, 14.8 dB of gain and 80 per cent drain efficiency. The product page prints 126 W as the maximum saturated power, 80.6 per cent as the best drain efficiency, states pulsed or continuous wave operation on 28 V, and names the body HX04100F2, flanged.

126 W is 51.00 dBm. Fourteen point eight decibels of gain puts the drive at 36.20 dBm, which is 4.17 W. That is a driver stage of its own, so the line up in front of this part is a small signal stage and a 4 W amplifier, and the 4 W amplifier has to be linear enough that its own products do not land in band.

Eighty per cent at 126 W is the highest efficiency on the shelf at this power level, and it is the reason the heat is 30.3 W rather than the 40 W a 75 per cent part would leave. For a continuous wave transmitter that is the difference between a fan and a bigger fan.

The parameter rows published for HX04100F2

Part classUnmatched gallium nitride HEMT power transistor
Frequency rangeDC to 4 GHz
Saturation output126 W
Saturation output in dBm, calculated51.00 dBm
Power gain14.8 dB
Drive power at saturation, calculated36.20 dBm, 4.17 W
Best drain efficiency, product page80.6 per cent
Drain efficiency, family index80 per cent
DC input at 80.6 per cent, calculated156.3 W
Drain current at 28 V, calculated5.58 A
Dissipation at saturation, calculated30.3 W
Drain rail28 V
Operating modePulsed or continuous wave, as stated on the product page
BodyHX04100F2, flanged
MatchingUnmatched, external network on the customer board
Scattering parametersNot published in text
Load voltage at 50 ohm, calculated79.4 V RMS, 112.2 V peak
Output per GHz of band, calculated31.5 W per GHz
Thermal resistance, junction to caseNot published
Gate bias point and quiescent currentNot published
Operating and storage temperatureNot published
Orderable addendum, marking and packingNot published
Shelf neighbour below, same bandHX0465F2, 65 W, 13.6 dB, 71 per cent, dual rail
Shelf neighbour, narrower bandHX03120, 138 W, 15.3 dB, 81 per cent, DC to 3 GHz

Five and a half amps and thirty watts, at the best efficiency on the shelf

At 80.6 per cent the DC input is 156.3 W, the drain current at 28 V is 5.58 A, and the heat is 30.3 W. That is a smaller supply than the 138 W member needs, 5.6 A against 6.1 A, for a part that gives up only 0.4 dB of output.

The heat is the headline. Thirty watts on a flange of this size is a spreader and a forced air path, and the case temperature at rated output is the number to close on, because the vendor publishes no junction to case resistance.

The drive is 4.17 W. A packaged driver at 36 dBm is a real stage: it needs its own rail, its own heat and its own match, and its linearity lands directly on the carrier. A driver that produces 36 dBm with 30 dB of gain is a two stage driver in itself, so the whole transmitter is three stages and two bias networks.

The output match works at 112.2 V peak. That is above the 100 V class, so the capacitors in the output network are 200 V or a series pair, and the connector and isolator have to be rated for the peak rather than the average.

HX04100F2 as the widest band member above one hundred watts

HX03120DC to 3 GHz138 W15.3 dB81 per cent0.40 dB above, one gigahertz narrower
HX03140DC to 3 GHz140 W14.5 dB78 per cent0.46 dB above, one gigahertz narrower
HX04100F2DC to 4 GHz126 W14.8 dB80.6 per centReference point
HX0465F2DC to 4 GHz65 W13.6 dB71 per cent2.87 dB below, 1.2 dB less gain
HX2040185F2 to 4 GHz185 W18 dB70 per cent1.67 dB above, band starts at 2 GHz

The 185 W member gives 1.67 dB more output with 3.2 dB more gain, and it costs the bottom two gigahertz of the band. For a transmitter that only has to work from 2 to 4 GHz it is the better part; for one that has to work from 100 MHz it cannot be used at all.

Against the 65 W member on the same band this part gives 2.87 dB, which is a doubling of power, at the cost of 1.2 dB of gain and 4.6 more amps of drain current. Whether that trade is worth it depends on the antenna, not on the transistor.

The RF power transistor cross reference carries the band and the power for the whole shelf, and the RF component sourcing page covers the driver stage and the passives that go with it.

Board notes at five and a half amps into a four gigahertz match

The gate bias is unpublished, so the negative rail, the clamp and the sequence are built to be adjustable and the quiescent point is set on the first article. On a continuous wave part of this size the quiescent current matters for linearity and for heat, and neither number is on the data sheet.

The input match has to hold across four gigahertz, which is the hardest single item on this board. A match that looks right at 2 GHz can present a short at 4 GHz, and without published scattering parameters the only route is measurement.

The drain feed carries 5.58 A. The choke, the feed trace and the bulk capacitance are chosen for current first, and the decoupling at the flange is placed so the loop from drain to source is short, because at 4 GHz the loop inductance is the whole story.

The output match works at 112.2 V peak and has to survive a full mismatch without the isolator, which is the case that destroys finals in the field. A 200 V capacitor and a connector rated above the peak are cheap insurance against a return loss event.

Thirty one and a half watts per gigahertz across the four gigahertz band is the highest density of any part above one hundred watts in this catalogue, and it explains why the supply is five and a half amps while the output is only 0.4 dB below the 138 W member on the narrower band. Density, not raw power, is what decides whether a part fits a given enclosure. It also decides the drive: 4.17 W at 36.20 dBm is the highest drive on the shelf above sixty watts, and it is the reason the line up in front of this part is three stages rather than two.

Questions buyers ask about HX04100F2

Is 80 per cent efficiency real across the band? The vendor prints a single best figure, 80.6 per cent, and does not publish an efficiency curve, so the number is a peak rather than a band figure. At the band edges the efficiency will be lower and the heat higher.

Is there a compression point? No. Saturation only, with pulsed or continuous wave operation stated, so a linear operating point is measured on the first article.

What is the gain flatness? Not published for this member. The shelf's matched families carry a flatness column; this one does not.

Can the 126 W member run at 48 V? The index and the product page both put this part on 28 V only. The dual rail member on the same band is the HX0465F2.

How do we start? Send the band, the output at the connector, the duty, the ambient and the rail. We will confirm the power and the efficiency at the edges, quote from the factory schedule, and ship a sample with test data.