Contact Us

HX03120

Brand: Hisiwell
Hisiwell HX03120 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HX03120 — Discrete & Power Semiconductors | Superb Automation

HX03120

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HX03120 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HX03120: one hundred and thirty eight watts from DC to 3 GHz on 28 V

The HX03120 is an unmatched gallium nitride HEMT power transistor from Hisiwell for the DC to 3 GHz window on a 28 V rail in continuous wave. The family index prints 138 W of saturation output, 15.3 dB of gain and 81 per cent drain efficiency. The product page describes the same device as a 120 W part, names the two bodies HX03120F2 for the flanged outline and HX03120P2 for the flangeless one, and then prints 138 W as the maximum saturated power with 83.3 per cent as the best drain efficiency. The two documents disagree on the headline power and on the efficiency, so both figures are carried on this page rather than averaged into one.

138 W is 51.40 dBm. Fifteen point three decibels of gain puts the drive at 36.10 dBm, which is 4.07 W. That is not a level a small signal chain reaches on its own, so the line up in front of this part is a stage with its own rail, its own heat and its own matching.

The part is unmatched. No input or output impedance is quoted, no scattering parameters are printed in text, and the match sits on the customer board. For a buyer this changes the question from which transistor to which transistor plus which match, because the 138 W only appears at the connector after the network has been built and measured.

The parameter rows behind the HX03120 headline

Part classUnmatched gallium nitride HEMT power transistor
Frequency rangeDC to 3 GHz
Saturation output, family index138 W
Saturation output in dBm, calculated51.40 dBm
Headline power in the product overview120 W
Maximum saturated power on the product page138 W
Power gain, family index15.3 dB
Drive power at saturation, calculated36.10 dBm, 4.07 W
Drain efficiency, family index81 per cent
Best drain efficiency, product page83.3 per cent
DC input at 81 per cent, calculated170.4 W
DC input at 83.3 per cent, calculated165.7 W
Drain current at 28 V, calculated6.08 A and 5.92 A on the two efficiencies
Dissipation at saturation, calculated32.4 W and 27.7 W on the two efficiencies
Drain rail28 V
Operating modeContinuous wave
MatchingUnmatched, external network on the customer board
Input and output impedanceNot published
Scattering parametersNot published in text
Body variantsHX03120F2 flanged, HX03120P2 flangeless
Load voltage at 50 ohm, calculated83.1 V RMS, 117.5 V peak
Output per GHz of band, calculated46 W per GHz
Thermal resistance, junction to caseNot published
Gate bias point and quiescent currentNot published
Operating and storage temperatureNot published
Orderable addendum, marking and packingNot published
Nearest neighbourHX03140, 140 W, 14.5 dB, 78 per cent
Next member on the wider bandHX04100F2, DC to 4 GHz, 126 W, 14.8 dB

Six amps on the drain and thirty two watts in the spreader

At 81 per cent the DC input is 170.4 W, the drain current is 6.08 A at 28 V, and the heat that leaves the die is 32.4 W. At the 83.3 per cent printed on the product page the same output takes 165.7 W and 5.92 A and leaves 27.7 W. The gap between the two efficiencies is 4.7 W of heat: small against thirty odd watts, but the difference between a six amp supply and a supply with margin.

Six amps continuous is a copper question, not a connector question. A common working figure for outer layer copper is about three amps per hundred thousandths of an inch at one ounce and ten degrees of rise, so 6.1 A wants roughly 200 mil at one ounce or 100 mil at two ounces, before the via field and the thermal reliefs are counted. The drain feed also carries the RF, so the choke and the bulk capacitance sit on the same geometry.

A linear regulator from a 48 V shelf into this rail would burn 122 W at 6.08 A and is not a serious option. A buck converter rated at eight amps with a low ESR output capacitor bank is the normal route, and the switching residue has to be kept off the gate bias line, which is the reason the bias is fed through its own filter rather than tapped off the drain choke.

At the output, 138 W into 50 ohm is 83.1 V RMS and 117.5 V peak. The connector, the cable and any isolator in front of the antenna have to be rated above that peak with margin for the standing wave a mismatched load produces, and the capacitors in the output match have to carry the same voltage rather than the 50 V parts that fill a drawer.

HX03120 against the rest of the DC to 3 GHz shelf

HX03120DC to 3 GHz138 W15.3 dB81 per centReference point
HX03140DC to 3 GHz140 W14.5 dB78 per cent0.06 dB above, 0.8 dB less gain
HX04100F2DC to 4 GHz126 W14.8 dB80.6 per cent0.40 dB below, one gigahertz wider
HX0445DC to 4 GHz62 W17.4 dB76.2 per cent3.48 dB below, 2.1 dB more gain
HX0625DC to 6 GHz34 W18.5 dB80.2 per cent6.08 dB below, three gigahertz wider
HX0610DC to 6 GHz16.6 W21 dB80.2 per cent9.19 dB below, 5.7 dB more gain
HX1020120P21 to 2 GHz140 W20 dB80 per cent0.06 dB above, 4.7 dB more gain, band limited
HX2040185F2 to 4 GHz185 W18 dB70 per cent1.27 dB above, starts at 2 GHz

The 0.06 dB to the HX03140 is one twentieth of a decibel, which is nothing on a level plan. The choice between the two therefore falls on gain, 15.3 dB against 14.5 dB, and on efficiency, 81 per cent against 78 per cent, and both of those favour this part on a continuous wave carrier.

If the band has to run to 4 GHz the HX04100F2 covers it with 0.4 dB less output and half a decibel less gain, and the trade is a gigahertz of band for a quarter of a decibel. If the band has to run to 6 GHz the ladder drops to 34 W and then 16.6 W, which is a different transmitter rather than a variant of this one.

The RF power transistor cross reference lists the whole unmatched shelf with the band, the power and the gain side by side, and the one stop RF supply page covers how a three stage line up is bought as one kit.

Board notes for an unmatched part at six amps

Hisiwell prints no gate bias point, no quiescent current and no bias sequence for this member. A gallium nitride HEMT of this class normally wants the negative gate present and clamped before the drain rises, and the drain removed before the gate falls, so the sequencer is part of the board rather than an afterthought in the test procedure. Because no quiescent figure is published, the first article sets the class of operation and the vendor has to confirm the gate window for the lot.

The match is the second item. With no scattering parameters in text, the input network is either lifted from a measured set that the factory supplies on request or built from a load pull on the first article. The output network has to work at 117.5 V peak, which rules out the small thin film capacitors that are fine at a watt.

The drain feed wants a quarter wave choke and a capacitor bank close to the device, with the bulk capacitance on the supply side of the choke so the RF sees the choke and not the bulk. The gate line wants its own filter, since the switching residue from the buck converter arrives on the drain and couples through the device capacitance.

Thermal closure is measurement, not arithmetic. No junction to case resistance is published for this part, so the case temperature at rated output in the final enclosure is the number that decides the heatsink, and an open bench reading is not a substitute.

Questions buyers ask about HX03120

Is this a 120 W part or a 138 W part? Both numbers are printed by the vendor, 120 W in the overview sentence and 138 W as the maximum saturated power. We quote 138 W as the saturation figure and state the 120 W label on the page, and we ask the factory to confirm the number on the lot before a schedule is set.

Is there a compression point? No. The index carries saturation only, in continuous wave, so a linear operating point has to be measured on the first article rather than read from a table.

Can it be pulsed? The vendor does not publish a pulse rating for this member. The pulsed parts in the same catalogue carry their own rows and their own duty limits, and mixing the two because the die looks similar is how a part gets destroyed.

Which body do we order? The flanged HX03120F2 for a bolted spreader, the flangeless HX03120P2 for a solder down carrier. Both are 28 V and both are rated at the same power.

How do we start? Send the band edges, the output wanted at the connector, the duty cycle, the ambient and the rail. We will confirm the member of the shelf, quote from the current factory schedule, and ship a sample with the factory test data at the band edges.