REF5025AIDGKR
Product Specifications
REF5025AIDGKR
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The REF5025AIDGKR from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
REF5025AIDGKR: a 2.5 V reference, and why the A grade is not the 3 ppm part
What this order code is
REF5025AIDGKR is a 2.5 V series voltage reference from the REF50xx family in an 8-lead VSSOP. The family offers 2.048 V, 2.5 V, 3 V, 4.096 V, 4.5 V, 5 V and 10 V outputs, and each output is available in three grades: an enhanced grade, a high grade and a standard grade. The A in this code is the standard grade, which is 0.1 percent initial accuracy and 8 ppm per degree C. The 3 ppm and 0.05 percent figures that appear at the top of most summaries belong to the high grade, which is a different order code.
The reference sinks and sources up to 10 mA, runs from 2.7 V to 18 V, and draws 0.8 mA typical. Noise is 3 microvolts peak to peak per volt of output, which at 2.5 V is 7.5 microvolts peak to peak in the 0.1 Hz to 10 Hz band. There is a trim pin, which on this family doubles as a noise reduction pin. The body is the 8-lead VSSOP at 3 mm by 4.9 mm, and the same die is offered in an 8-lead SOIC with better long term stability.
Parameters as published
| Item | Value |
|---|---|
| Output voltage | 2.5 V |
| Grade, this code | standard grade, A |
| Initial accuracy, A grade | 0.1 percent, 2.5 mV |
| Temperature drift, A grade | 8 ppm per degree C maximum |
| Initial accuracy, high grade | 0.05 percent, 1.25 mV |
| Temperature drift, high grade | 3 ppm per degree C maximum |
| Output current | plus or minus 10 mA, sink and source |
| Input voltage range | 2.7 V to 18 V |
| Quiescent current | 0.8 mA typical |
| Low frequency noise | 3 microvolts peak to peak per volt, 7.5 microvolts at 2.5 V |
| Long term stability | 50 ppm per 1000 hours in VSSOP, 22 ppm in SOIC |
| Temperature range and package | minus 40 to plus 125 degrees C, 8-lead VSSOP |
Numbers that decide the application
On this code the initial error is 2.5 mV and the drift over the 165 degree industrial span at 8 ppm per degree C is 1320 ppm, which is 3.3 mV. The two terms together are 5.8 mV worst case. On the high grade the same arithmetic gives 1.25 mV and 1.24 mV, 2.5 mV together. A bill of materials that was written around the 3 ppm headline and then bought at the A grade is carrying 2.3 times the error it was qualified for.
Against a 16 bit converter on a 2.5 V range, one count is 38.15 microvolts. The 2.5 mV initial error is 65.5 counts and the drift term alone is 86 counts, so this grade does not support a 16 bit absolute measurement without a system level calibration. The noise is a different story: 7.5 microvolts peak to peak is 0.2 of a count, so noise is not the limit at 16 bits and only becomes visible at 18 or more.
Long term stability is quoted per package, and the difference is large: 50 ppm per 1000 hours in the VSSOP body against 22 ppm in the SOIC. Fifty ppm of 2.5 V is 125 microvolts, which is 3.3 counts at 16 bits, so a product that is calibrated once and shipped for years sees the package choice in its field accuracy.
The 2.7 V minimum input against a 2.5 V output leaves 200 mV of headroom, which is enough at 10 mA only because the part is a series reference with a low dropout pass element. Running at 18 V and 0.8 mA is 14.4 mW, so the high voltage capability costs nothing in power as long as the load current stays low.
Selection and cross reference notes
The grade letter is the whole selection, and the voltage is the second field. Because the family summary leads with the best grade, quotations and catalogue pages routinely show 3 ppm next to a code that is 8 ppm. The check is the ordering table: the suffix letter after the voltage is the grade, and the body code follows it.
Where a substitute is being considered, the fields to match are output voltage, grade, package and long term stability. A part with the same voltage and a better grade in a different body is a board change, and a part with the same body and a worse grade is a specification change that the calibration procedure will not cover.
Where it fits
Precision data acquisition, instrumentation, test equipment and any converter front end where the reference sets the absolute accuracy. The 10 mA sink and source capability means it can drive a converter reference pin directly without a buffer, and the trim pin is used at test to remove the initial error. Buyers comparing references can start at the ADC and DAC cross reference page, and teams checking lead time on precision parts usually work from the component lead time solutions page.
Buying notes
The code reads as family, voltage, grade and body: 5025 is 2.5 V, A is the standard grade, I is the high grade, DGK is the VSSOP, R is the reel. The letters are one character apart and the price difference is real, so the label on the reel is the only way to confirm which grade arrived. Long term stability and the package are tied together, which is worth remembering when a cheaper body is proposed.
Sourcing notes and next step
Precision references are a category where grade substitution is common and expensive to discover late. We quote the exact grade and body and confirm both on the label. Send the codes, quantities and the accuracy your calibration assumes through the BOM shortage recovery page and we will answer with availability and the grade actually on offer.
Request Quote — In Stock, 100% New & Original, Full Warranty