Contact Us

OPO7DRZ

Brand: Analog Devices
Analog Devices OPO7DRZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

OPO7DRZ — Analog & Mixed-Signal ICs | Superb Automation

OPO7DRZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The OPO7DRZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

OP07DRZ: The Industry Standard Offset Amplifier, Improved and in SOIC

The OP07DRZ is the OP07D precision amplifier in an 8-lead SOIC with lead free finish. The base part is the classic OP07 type: a bipolar operational amplifier with 150 microvolts maximum offset voltage, 1.5 microvolts per degree C maximum offset drift, 0.25 microvolts peak to peak of low frequency noise, 115 dB minimum common mode and power supply rejection, 1 nA maximum input bias current and 1.1 mA of supply current. It runs from plus or minus 4 V to plus or minus 18 V, is specified from minus 40 C to plus 125 C, and is stable at high closed loop gains, which is where its linearity and gain accuracy are specified.

What the D suffix changes on a board full of OP07 sockets

The OP07 footprint is one of the most reused in analogue circuitry, and a second source decision on it is usually about availability rather than performance. The OP07D differs from the older OP07 in three ways that matter: wider output swing, lower supply current and higher common mode and supply rejection, all from a process that keeps the same pinout and the same external null circuit. A board built around an OP07 takes the OP07D without a change, and the improvement shows up in the headroom available at the output and in the drift of the offset over temperature. The part is specified over the extended industrial range, so a board that was characterised at 25 C gets limits at the extremes rather than typicals.

Values at a glance

ParameterValueNote
Offset voltage150 microvolts maximumNullable with the external potentiometer
Offset drift1.5 microvolts per degree C maximumSpecified, not typical
Input bias current1 nA maximumLow enough for a 100 kohm source network
Noise0.25 microvolts peak to peak0.1 Hz to 10 Hz
Common mode rejection115 dB minimum130 dB typical
Supply current1.1 mA typicalLower than the older OP07 at the same gain
Supply rangePlus or minus 4 V to plus or minus 18 VWide enough for plus or minus 15 V rails
TemperatureMinus 40 C to plus 125 C8-lead SOIC_N and 8-lead DIP

Where the offset budget decides the part

A thermocouple with a 40 microvolt per degree C sensitivity, read by a 16-bit converter over a 100 mV span, has a 1.5 microvolt code size. The offset of the amplifier ahead of the converter has to be a fraction of a code or the cold junction compensation is meaningless, and the drift has to be small enough that a calibration at room temperature still holds in a cabinet at 60 C. That is the calculation the OP07 family was built for, and it is why the part survives in instrumentation, sensor interfaces and shunt measurement long after faster amplifiers arrived. Where the source impedance is high and the bandwidth requirement is above a few tens of kilohertz, the part is the wrong choice, and a CMOS part with a picoamp input and higher bandwidth is the better answer.

Nulling, gain and the stability question

The external null circuit costs a potentiometer across two pins and works by injecting a small current into the input stage. It removes the offset at one temperature and leaves the drift, so a nulled OP07D is not the same as a low drift part at temperature. Gain linearity holds at closed loop gains of 100 and above, which is where the part is specified, and anyone who uses it at unity gain gets a stable amplifier with a higher noise gain and a slower settling than the datasheet's headline numbers suggest. The output is short circuit protected, and the input stage is protected against a differential input voltage up to the supply rails, both of which matter on a board where the sensor can be disconnected while powered.

Procurement and second source

The OP07 family has been second sourced by every major vendor, and the differences between them are in the drift limits rather than in the pinout, so a substitution has to be checked against the drift column and not only against the offset. The amplifier cross reference lists the precision parts that share the socket, the obsolete part cross reference hub covers what to do when a specific suffix goes away, and ADI part second source sets out what to verify before a second vendor enters a qualified position.