MAX823MEUK+T
Product Specifications
MAX823MEUK+T
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The MAX823MEUK+T from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
MAX823MEUK+T: a 4.38 V supervisor with a watchdog and 6 microamps of current
The MAX823 is a five pin microprocessor supervisory circuit that combines a supply monitor, a watchdog timer and a manual reset input in one SOT-23 package. The order code reads M for the 4.38 V reset threshold, EUK for the five lead SOT-23 body and +T for tape and reel. The vendor's reset threshold table puts the M suffix at 4.38 V, with L at 4.63 V, T at 3.08 V, S at 2.93 V, R at 2.63 V, and the two low voltage suffixes Z at 2.32 V and Y at 2.19 V available in SC70 only. The other numbers that matter are the 6 microamps of operating current for the M suffix, the 140 millisecond minimum power on reset and the 1.6 second watchdog timeout.
What the vendor page states
| Parameter | Value |
|---|---|
| Reset threshold | 4.38 V for the M suffix, 4.63 V for L, 3.08 V for T, 2.93 V for S, 2.63 V for R |
| Threshold accuracy | 4.38 V nominal, 4.45 V minimum at 0 to 70 C, 4.50 V maximum |
| Threshold temperature coefficient | 40 ppm per degree C |
| Operating current | 6 microamps for the L and M suffixes in SC70, 2 microamps for the T, S, R, Z and Y suffixes |
| Reset timeout | 140 milliseconds minimum, 200 typical, 280 maximum |
| Reset validity | guaranteed low down to a 1 V supply |
| Watchdog timeout | 1.6 seconds |
| Manual reset | input provided on the MAX823 |
| External components | none required |
| Package | 5-lead SOT-23 and SC70 |
4.38 V on a 5 V rail is 12.4 percent of headroom
The threshold sits 620 mV below a 5 V nominal rail, or 12.4 percent. That is the right window for a rail that is allowed to droop during a load transient without the processor being reset, and it is too low for a rail whose regulator has failed, which is why the part also holds reset valid down to a 1 V supply: the reset output stays asserted all the way through the collapse instead of releasing at some intermediate voltage while the processor is still running on a discharged capacitor. The 40 ppm per degree C coefficient moves the threshold 29 mV across the full temperature range, which is small against the 620 mV of headroom.
6 microamps over ten years is 526 milliamp hours
A supervisor that watches a battery rail must not be the reason the battery is flat. At 6 microamps the part draws 30 microwatts on a 5 V rail, and over ten years that is 526 milliamp hours of charge. On a 2000 milliamp hour cell that is a quarter of the capacity, which is why the lower thresholds in the family are specified at 2 microamps: a 3 V rail that has to survive ten years of standby needs the smaller number, not the tighter threshold.
140 milliseconds of reset and 1.6 seconds of watchdog
The reset timeout is 140 milliseconds minimum, 200 typical and 280 maximum, which is the window the processor gets to hold its pins in a known state while the rail settles. The watchdog timeout is 1.6 seconds, so the firmware must toggle the watchdog input inside that window or the part pulls reset. Those two numbers set the boot sequence: the processor has at most 1.6 seconds after reset release to prove it is running, and it must keep proving it at least every 1.6 seconds thereafter. A firmware that spends longer than that in a long conversion or a flash erase will be reset, and that is a software constraint the hardware choice imposes.
The manual reset input is the reason to take this variant
The MAX823 combines the watchdog with a manual reset input, which the MAX824 lacks and which the MAX825 has without the watchdog. In a product with a front panel button the manual reset input lets the same pin that resets the processor also drive the reset line cleanly, with the 140 millisecond timeout, instead of a discrete RC that may release before the rail is stable. The power management cross reference lists the supervisors and references that share the five pin land, the BOM shortage recovery page covers the second source route across the threshold suffixes, and the analog and mixed signal category page holds the rest of the supervisory family.
Request Quote — In Stock, 100% New & Original, Full Warranty