Contact Us

ADM2682EBRIZ

Brand: Analog Devices
Analog Devices ADM2682EBRIZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADM2682EBRIZ — Analog & Mixed-Signal ICs | Superb Automation

ADM2682EBRIZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADM2682EBRIZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

ADM2682EBRIZ: 5 kV of Isolation With the DC to DC Converter Inside the Package

The ADM2682E is a complete isolated RS-485 transceiver: the signal isolator, the isolated DC to DC converter that powers the line side, and the RS-485 driver and receiver in one package, running from a single 5 V or 3.3 V supply at 16 Mbps and rated 5000 V rms for one minute under UL 1577. The point of the part is that there is no external transformer, no separate isolated supply and no third winding to specify, which removes three parts and one qualification from an isolated bus port. What it does not remove is the thermal and current cost of generating that isolated rail inside a 16 lead body.

Isolation numbers that are routinely confused

The 5000 V rms figure is a one minute withstand test under UL 1577. The recurring peak working voltage is VIORM 846 V peak, and the medical standard ratings are 400 V rms basic and 250 V rms reinforced under IEC 60601-1, with 600 V rms basic and 380 V rms reinforced under IEC 60950-1. A product that needs a 600 V reinforced barrier cannot use the 5000 V number as the answer; the standard specific figure is the one the safety file quotes, and the difference between basic and reinforced is a factor of two in the requirement.

16 Mbps and the cable behind it

The device is specified to 16 Mbps with a 63 ns typical and 100 ns maximum driver propagation delay, 18 ns of output skew and 15 ns rise and fall times, and it meets ANSI/TIA/EIA-485-A-98. At 16 Mbps a bit is 62.5 ns, so 100 ns of worst case delay is one and a half bit times, which is fine for a half duplex bus because the delay is not in the round trip budget unless the driver is looped back. The cable is the limit: 16 Mbps over a long drop is a transmission line problem, and the 125 mV of receiver hysteresis plus the minus 200 mV to minus 30 mV threshold window is what keeps a terminated bus from chattering.

ItemPublished valueWhat it decides
Isolation5000 V rms for one minute, VIORM 846 V peakWithstand against working voltage
Data rate16 Mbps62.5 ns bit time
Driver output2.0 V to 3.6 V into 100 ohmMargin against the 1.5 V RS-485 minimum
Short circuit current200 mAFault survival on the bus
Temperatureminus 40 C to plus 85 CNo 105 C code in the family

The internal converter is the current bill

Everything on the line side is powered through the internal converter, so the 5 V supply carries the driver current plus the conversion loss. The driver delivers 2.0 V to 3.6 V into a 100 ohm termination, which is 20 to 36 mA of line current on a single terminated pair, and the converter that makes the isolated 5 V has to supply that plus the receiver and the isolation barrier. A half duplex bus with two terminations doubles the line current, and the supply budget should be built from the termination count rather than from a quiescent figure.

What to check on the isolated side

The enable and disable times are 120 ns and 150 ns, so a direction change costs about 270 ns and a 16 Mbps protocol has to allow for it. Input thresholds on DE, RE and TxD are 0.27 times VCC low and 0.7 times VCC high, so a 3.3 V microcontroller drives them directly. The isolated ground is a real ground and has to be treated as one: the return path for the line side is the isolated supply, and the common mode transient immunity of the barrier is specified with a 1 kV transient of 800 V magnitude, which is the figure to check against a motor drive environment.

When the discrete route is better

Below 1 Mbps with a small isolated load, a transceiver plus a separate isolator and a push pull transformer can be cheaper and gives the transformer a known barrier. The CAN bus transceiver selection page covers the neighbouring interface families, the medical device components page covers the 60601 side, and lot checks follow the incoming inspection plan.