AD817AR
Product Specifications
AD817AR
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD817AR from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD817AR: 350 V per Microsecond Is an Output Current Number Once a Capacitive Load Is Attached
The AD817 is a 50 MHz unity gain bandwidth amplifier with a 350 V per microsecond slew rate, 45 ns settling to 0.1 percent on a 10 V step, and a 50 mA minimum output current. It is specified on a single 5 V supply and on dual supplies from plus and minus 5 V to plus and minus 15 V, and it is one of the few parts of its generation that is published as driving an unlimited capacitive load. The catch is that the slew rate and the load capacitance are two statements about the same 50 mA, and they cannot both hold at once.
What 50 mA does to the slew rate
A capacitor takes current in proportion to the rate of change of voltage. One thousand picofarads slewing at 350 V per microsecond needs 350 mA, seven times what the output can deliver. With 50 mA available, the same 1000 pF load slews at 50 V per microsecond, so a full 10 V step takes 200 ns instead of the 28.6 ns the headline figure implies. The amplifier remains stable and does not oscillate, which is what the unlimited capacitive load claim is really about, but the settling time and the full power bandwidth both collapse to the resistive load numbers only.
Full power bandwidth is arithmetic, not a data sheet line
For a sine wave the slew rate limit is 2 pi f Vpk. At 350 V per microsecond and a 20 V peak to peak output the ceiling is 5.6 MHz, at 10 V peak to peak it is 11.1 MHz, and at 2 V peak to peak it is 55.7 MHz. The 50 MHz unity gain bandwidth therefore describes small signals only, and a 10 MHz sine at 10 V peak to peak cannot be produced by this part at any gain. Audio and video stages sit comfortably inside the limit, a 5 MHz intermediate frequency stage at full scale does not.
| Item | Published value | Consequence on a board |
|---|---|---|
| Unity gain bandwidth | 50 MHz | Small signal only |
| Slew rate | 350 V per microsecond | 5.6 MHz at 20 V peak to peak |
| Output current | 50 mA minimum | 50 V per microsecond into 1000 pF |
| Supply current | 7.5 mA maximum | 75 mW on a 10 V total supply |
| 0.1 dB flatness | 70 MHz at gain of plus one | Video and buffer stages |
Offset, drift and the grades that do not exist
The input offset voltage is 0.5 mV typical and 2 mV maximum, and the part is offered in the 8 lead plastic DIP and the 8 lead SOIC over minus 40 to plus 85 C. Both packages are the same die and the same grades, so the choice is mechanical. There is no automotive or extended temperature code in the ordering guide, which is the first thing to check when a board is specified to 105 C and the bill of materials was carried over from an industrial product.
Video numbers worth keeping
Differential gain error is 0.04 percent and differential phase error is 0.08 degrees at 3.58 MHz, and the 0.1 dB flatness point is 70 MHz at a gain of plus one. Those three numbers are what a composite video buffer is bought for. The same part also settles a 10 V step to 0.1 percent in 45 ns, which is the number to use when the amplifier drives a multiplexer into an analog to digital converter and the acquisition window is short.
Where it sits next to a faster part
An application that needs more than 50 mA or a wider supply has to move to another family, and the substitution is rarely pin compatible because the compensation pins differ. The amplifier cross reference page lists the op amp families that share a footprint, the pin to pin cross reference page covers the package question, and the ADI part second source page covers what a second source has to match on an amplifier.