MAX811MEUS+T
Product Specifications
MAX811MEUS+T
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The MAX811MEUS+T from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
MAX811MEUS+T: Four Pins, 4.38 V and 140 ms for a 5 V Rail With a 10 Percent Tolerance
The MAX811MEUS+T is a 4-pin voltage monitor in a SOT143 package that combines a precision supply comparator with a manual reset input. The M option trips at 4.38 V, the reset output is held for at least 140 ms after the supply crosses the threshold, the active-low reset is guaranteed valid down to a 1 V supply, the part draws 6 uA, it needs no external components, and it is specified over temperature. The MAX812 is the same monitor with an active-high reset output, and the other letter options set 4.63 V, 2.93 V, 2.63 V and 3.08 V trip points for 5 V, 3.3 V and 3 V rails.
Four pins is the whole appeal: supply, ground, reset and a button. There is no watchdog, no second comparator and no adjustable threshold, and in a product that already has a controller with its own watchdog that is exactly the right amount of supervisor.
4.38 V is 87.6 percent of 5 V, which is the right band for a 10 percent rail
A 5 V rail at minus 10 percent is 4.5 V, and this trip point sits 120 mV below it, so a supply in a legal sag does not trigger a reset. At minus 5 percent, which is 4.75 V, the margin is 370 mV, so the same part works on a tighter rail with more room. That is the difference between this option and the 4.63 V member, which is inside the legal band of a 10 percent rail and asserts reset on a supply that is still within specification. Choosing between the two is a matter of reading the rail tolerance on the drawing rather than of preference, and it is the single most common supervisor error in a bill of materials.
The 140 ms reset is 14 frames at a 100 Hz refresh rate, which is long enough for an oscillator to start and for a display controller to initialise, and short enough that a power cycle is not visibly slow. The manual reset input is debounced, so a mechanical button does not produce a burst of resets, and it is the one feature that separates this part from a three pin monitor.
| Threshold | 4.38 V, 87.6 percent of a 5 V rail |
| Margin at minus 5 percent | 370 mV below 4.75 V |
| Margin at minus 10 percent | 120 mV below 4.5 V, so a legal sag does not reset |
| Reset pulse | 140 ms minimum, 14 frames at 100 Hz |
| Low supply behaviour | Active-low reset valid down to a 1 V supply |
| Supply current | 6 uA, 30 uW at 5 V |
| Manual reset | Debounced input on the fourth pin |
| Polarity | Active low on this part, active high on the MAX812 |
| Components | None external |
| Package | 4-pin SOT143, the EUS suffix |
Six microamps and no external parts is the whole specification for a battery product
Thirty microwatts at 5 V is small enough that the supervisor is never the reason a battery product fails to make its standby target, and with no external divider there is no resistor pair to leak or to drift. The trip point is trimmed inside the part, which is why a 4-pin package can do what a comparator and two resistors used to do in eight pins with worse accuracy. The trade is that the threshold is fixed at purchase and cannot be moved, so a product that needs a different rail needs a different order code rather than a resistor change.
The manual reset input is more useful than it appears in a sealed instrument. A technician who can hold a button and force a known state has a diagnostic tool, and the debounce means the reset is a single clean pulse rather than a burst that leaves the controller in an undefined state. Where the button is on a panel a metre away, the input's own filtering decides whether the reset works in the presence of the cable's pickup, and that is worth a bench test with the real cable.
Two questions buyers ask
Which threshold option suits a 3.3 V rail?
The 3.08 V option for a rail held to 5 percent and the 2.93 V option for a rail at 10 percent, by the same arithmetic used here. The 4.38 V part on a 3.3 V rail never releases the reset, so the letter in the order code has to follow the rail rather than the family.
Can the manual reset pin be driven by a controller instead of a button?
Yes. It is a debounced logic input, so an open-drain output on the controller can hold the system in reset while firmware updates, and the reset output stays asserted until 140 ms after the input is released. That arrangement is the usual way to guarantee a clean restart after a firmware update without adding a second supervisor.
Ordering and supply
The MEUS suffix sets the 4.38 V threshold and the 4-pin SOT143 package, and the T suffix is tape and reel. Traps are the threshold letter, the reset polarity and the pin count: the MAX811 has four pins and an active-low output, the MAX812 the active-high one, and a five pin part from a neighbouring family adds a watchdog that may or may not be wanted. A wrong letter is a reset that never releases or one that releases during a legal brownout.
We hold and source this family for production and for repair. Start at the analog mixed signal ICs family page, compare a candidate against the power management cross reference, and where a monitor has to be replaced on a board that is already built, the order in how to verify a drop in replacement puts the threshold and the reset polarity first.
Request Quote — In Stock, 100% New & Original, Full Warranty