Contact Us

LTM8083IY#PBF

Brand: Analog Devices
Analog Devices LTM8083IY#PBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LTM8083IY#PBF — Analog & Mixed-Signal ICs | Superb Automation

LTM8083IY#PBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LTM8083IY#PBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

LTM8083IY: a 36 V buck-boost module that covers 3 V to 36 V in and 1 V to 36 V out

The LTM8083IY is a complete buck-boost switching regulator in a 6.25 mm by 6.25 mm by 2.22 mm ball grid array, with the controller, the power switches, the inductor and the support components inside the package. It regulates any output between 1 V and 36 V from any input between 3 V and 36 V, delivering 12 V at 0.8 A from a 6 V input and 12 V at 1.5 A from 12 V or 36 V, with an adjustable output current limit, output current monitoring, a 300 kHz to 2 MHz switching frequency, spread spectrum and compliance with CISPR25 Class 5 limits. The industrial grade is specified from minus 40 to 125 degrees.

Published values

ParameterValue
Input voltage3 V to 36 V
Output voltage1 V to 36 V, set by the feedback divider
Output current1.5 A, and 0.8 A at 12 V out from 6 V in
Feedback reference1 V, plus or minus 1.5 percent
Switching frequency300 kHz to 2 MHz, with external synchronisation
Line regulation0.02 percent per volt typical
Load regulation0.5 percent typical
Current limitadjustable through the control pin
Current monitoringanalogue output, 105 millivolts typical at a 100 millivolt sense
Soft start52 microamps of pull-up current into the soft start pin
Enable thresholds1.240 V rising, 1.210 V falling
Package6.25 mm by 6.25 mm by 2.22 mm BGA, MSL 3
Temperature gradeI, from minus 40 to 125 degrees

A module that stays in regulation while the input crosses the output

A buck converter cannot hold 12 V out when the input falls to 6 V, and a boost converter cannot hold 12 V out when the input rises to 36 V. A buck-boost covers the whole span, and the LTM8083 does it with a seamless transition between regions rather than a mode change with a discontinuity in the loop. For a product that runs from a 12 V adapter, a 24 V industrial rail or a battery that swings from 9 V to 28 V, that is the difference between one converter and three.

The published capability makes the crossover visible: 12 V at 1.5 A from 12 V in is a pass-through case with the switches barely working, 12 V at 1.5 A from 36 V in is a deep buck, and 12 V at 0.8 A from 6 V in is a boost with the input current close to 1.9 A. The 0.8 A figure at 6 V in is the thermal and current limit of the module talking, not a control limit, so a board that needs 1.5 A at 12 V from a 6 V input is asking for a different part.

Setting the output and the current limit with resistors

The feedback reference is 1 V, so the output is 1 V multiplied by one plus the ratio of the top resistor to the bottom one. The 12 V case with a 110 kilohm top and a 10 kilohm bottom is the worked example in the data sheet, and the same ratio gives 12 V whatever the input is doing. The tolerance of the reference, plus or minus 1.5 percent, is the dominant term in the output accuracy, so 0.1 percent resistors do not buy a tighter rail.

The current limit is set through a sense resistor between the two sense pins and a control voltage, and the module can report the current through an analogue output at 105 millivolts typical for a 100 millivolt sense. That is a real feature for a battery charger or a solar input, where the input current has to be limited rather than the output, because it puts the limit where the energy source is rather than where the load is.

Electromagnetic compatibility as a specified feature

The module integrates three-terminal capacitors and spread spectrum, and the data sheet states compliance with CISPR25 Class 5 limits with reference to the measurement setup. For an automotive or an industrial product that has to pass a conducted emissions test, a module whose compliance is stated is a different procurement decision from a discrete converter whose compliance has to be engineered, measured and re-engineered.

The 2.22 mm height and the BGA footprint mean the module can go on the underside of the board, which is often the only space available in a housing that was laid out before the converter was added. That is a mechanical advantage rather than an electrical one, and it is frequently the reason a module wins against a cheaper discrete solution.

The pages that answer this most often are the power management cross reference for the family alternatives, one stop BOM sourcing for the acceptance test, and vendor consolidation for the case where a replacement has to be fitted before the next build.

Two questions buyers ask

Can the LTM8083 deliver 1.5 A at 12 V from a 6 V input? No. The published figure at 6 V in and 12 V out is 0.8 A. At 12 V in or 36 V in the module delivers 1.5 A at 12 V out, so the boost region is the current limited one.

How is the output voltage set? With a divider from the output to the feedback pin, using the 1 V reference, so the output is 1 V times one plus the top over the bottom resistor. A 110 kilohm top and a 10 kilohm bottom give 12 V.