Contact Us

LTM4630AEV#PBF

Brand: Analog Devices
Analog Devices LTM4630AEV#PBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LTM4630AEV#PBF — Analog & Mixed-Signal ICs | Superb Automation

LTM4630AEV#PBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LTM4630AEV#PBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

LTM4630AEV#PBF: dual 18 A, 36 A single, BGA body, E grade

What this order code is

LTM4630AEV#PBF is the dual output power module rated 18 A per channel, or 36 A on one channel with the two tied together, in the ball grid array body at 16 mm by 16 mm by 5.01 mm, E grade, RoHS finish. Inside are both switching controllers, both sets of power FETs, both inductors and the supporting parts, so the outside world is capacitors, one setting resistor per channel and the sense connections.

The A suffix is the whole reason this part exists in two versions. The plain LTM4630 stops at 1.8 V of output; the A extends the range to 8 V, which is what lets the same body make a 5 V rail, and it also improves light load efficiency. Input is 4.5 V to 18 V, and the vendor qualifies that wider input and output range with a date code: parts dated 1720 and later carry 18 V in and 8 V out, parts before that date code carry 15 V in and 5.3 V out.

Parameters as published

ItemValue
Output currentdual 18 A, or single 36 A
Input voltage range4.5 V to 18 V, date code 1720 and later
Output voltage range0.6 V to 8 V per channel, date code 1720 and later
Total DC output errorplus or minus 1.5 percent
Remote sensedifferential amplifier
Parallel operationmultiphase, up to 144 A
Temperature senseinternal temperature monitor
Frequencyadjustable, or synchronised to an external clock
Pin compatibilityLTM4620A dual 13 A, LTM4630 dual 18 A
Light loadburst mode or pulse skipping, selectable
Sequencingsoft start and output voltage tracking
Protectionovercurrent foldback, output overvoltage
Body16 mm by 16 mm by 5.01 mm BGA
GradeE

Numbers that decide the application

Two channels at 1 V and 18 A each is 36 W of output from 2.56 square centimetres of body. At an assumed 86 percent the input power is 41.9 W, the loss is 5.86 W, and that is 2.29 W per square centimetre of module footprint against 14 W per square centimetre delivered. On a 12 V bus the input current is 1.74 A per channel, 3.49 A for the pair, which is the number the connector and the input capacitors have to be sized against.

The 18 V ceiling has to be read together with the bus tolerance. A 12 V rail at plus 10 percent is 13.2 V and leaves 4.8 V of headroom; a 15 V rail at plus 5 percent is 15.75 V and leaves 2.25 V; a 15 V rail at plus 10 percent is 16.5 V and leaves 1.5 V. Those are the numbers that decide whether a transient clamp is needed upstream, because a load dump or an unclamped adapter can pass 18 V without warning.

The date code is a supply chain fact with an electrical consequence. A reel dated before 1720 is a 15 V, 5.3 V part, which means a 5 V rail is inside it but a 6 V or 8 V rail is not, and a 16 V bus is outside it. Two reels of the same order code can therefore differ in what the rail is allowed to be, and the only way to know is the date code on the label.

Where it fits and where it does not

It fits a 12 V to 1 V core rail at 36 A on one channel, a pair of rails at 3.3 V and 1.8 V at 18 A each, a 5 V rail on the A version, and a 144 A rail built from four modules in multiphase. It does not fit an input above 18 V, a rail above 8 V, or an application that needs the two channels to be independent in a way the shared body cannot support thermally.

The internal temperature monitor is worth having on this body: two channels dissipating 5.86 W in one package means the junction temperature is the first limit reached, and a monitor that can be read during a thermal chamber run turns a derating argument into a measurement.

Supply and second source questions

Three attributes have to travel together here: the A suffix, the date code and the body letter. A plain LTM4630 will not make a 5 V rail, a pre-1720 reel will not take an 18 V bus, and the BGA and LGA bodies differ in height and process. Power path and sequencer parts for these rails are compared on the power management cross reference page.

Sourcing notes and next step

We quote the AEV code with the body and grade written out, and we state the date code range of the stock we are offering, because on this part it changes the input and output ceilings. Send the line items and required date through the BOM shortage recovery page and we will answer with availability. The wider module range is on the analog and mixed signal IC page.

Request Quote — In Stock, 100% New & Original, Full Warranty