LTM4624EY#PBF
Product Specifications
LTM4624EY#PBF
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The LTM4624EY#PBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
LTM4624EY#PBF: the 4 A module in the 6.25 mm BGA and the 2.375 V bias mode
What this order code is
LTM4624EY#PBF is the LTM4624 power module in the 6.25 mm by 6.25 mm by 5.01 mm BGA, tape and reel. The module is a complete 4 A step-down supply containing the controller, the power field effect transistors, the inductor and the support components, with an input range of 4 V to 14 V, or 2.375 V to 14 V when an external bias supply is provided, an output range of 0.6 V to 5.5 V set by one resistor, plus or minus 2 percent of total DC output error, and 5 A of peak output current.
The bias mode is the feature that separates this module from the 3.6 V floor of the LTM4622A family. With a small external bias the input can fall to 2.375 V, which is what a 3.3 V backplane at minus five percent or a 2.5 V rail needs when the module has to produce a lower rail from it. The module also has a selectable discontinuous mode and a power good output.
Parameters as published
| Item | Value |
|---|---|
| Output current | 4 A continuous, 5 A peak |
| Input voltage range | 4 V to 14 V, or 2.375 V to 14 V with an external bias |
| Output voltage range | 0.6 V to 5.5 V |
| Total DC output error | plus or minus 2 percent |
| Control | current mode, fast transient response |
| Sequencing | output voltage tracking |
| Light load mode | selectable discontinuous mode |
| Indicators | power good |
| Protection | overvoltage, overcurrent, overtemperature |
| External components | bulk input and output capacitors only |
| Body | 6.25 mm by 6.25 mm by 5.01 mm BGA |
| Packing | tape and reel |
Numbers that decide the application
Four amps at 1.2 V is 4.8 W of output, about 0.78 W of loss at 86 percent, and 0.47 A from a 12 V input. At 3.3 V the same 4 A is 13.2 W of output and 2.15 W of loss, which is a different thermal problem in the same body, and at 5 V it is 20 W and 3.3 W. The 5.01 mm height is the tallest of the small modules and exists to give the inductor and the heat path room, so a board that chose this code for its 6.25 mm footprint has accepted the height as part of the bargain.
The bias mode arithmetic is the one to check first on a 3.3 V backplane. At 2.375 V of input and a 1.2 V output the module draws 2.35 A of input current for a 4 A output, which is 2.35 A through a connector and a trace that a board may have sized for less. The mode needs the external bias to be present before the input falls, so a hot plug event that removes the bias while the input is still up is the case that has to be checked in the sequence.
Total error of plus or minus 2 percent is 24 mV at 1.2 V and 110 mV at 5.5 V, one step wider than the 1.5 percent of the LTM4622A family, and that difference matters on a core rail. Peak current of 5 A is a transient allowance set by the output capacitor: 1 A of step for 10 us is 10 uC, which a 100 uF capacitor supplies with 100 mV of sag, so the peak rating and the capacitor value are read together. The discontinuous mode is the light load setting, and a line that needs low ripple at light load should not select it without checking the emission requirement.
Where it fits and where it does not
It fits a 4 A point of load rail on a 12 V bus, a 2.5 V or 3.3 V input rail with the bias mode, a datacom or storage card with a 6.25 mm square of board, a medical diagnostic instrument, and a line that needs a power good signal. It does not fit a 24 V bus, an output above 5.5 V, a rail that needs better than 2 percent, or a stack height under 5 mm.
Supply and second source questions
A substitute has to match the 5.01 mm BGA height and the same pin map, and the bias mode is the attribute most likely to be missing from a part proposed as equivalent. The second question is the height, which is often the reason this module was chosen and the first thing a cheaper alternative loses. Modules with their height and input options are compared on the power management cross reference page.
Sourcing notes and next step
We quote the BGA body, the 5.01 mm height and the bias mode explicitly, and we will ask whether the line relies on operation below 4 V of input. Send the line items, quantities and required date through the BOM shortage recovery page and we will answer with availability. The wider power device list sits on the analog and mixed signal IC page.
Request Quote — In Stock, 100% New & Original, Full Warranty