LTM4618EV#PBF
Product Specifications
LTM4618EV#PBF
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The LTM4618EV#PBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
LTM4618EV#PBF: 6 A module with tracking and a phase lock loop, BGA body
What this order code is
LTM4618EV#PBF is the 6 A step-down power module in the ball grid array body at 9 mm by 15 mm by 4.92 mm, E grade, RoHS finish. The package holds the controller, the power FETs, the inductor and the support components, and the board supplies the capacitors and one resistor that sets the output between 0.8 V and 5 V.
Two features separate this family from a plain module. It tracks another rail for supply sequencing, and its switching frequency locks to an external clock between 250 kHz and 780 kHz, which lets several modules run at one frequency or at fixed phase offsets instead of beating against each other. It also has a power good output, an overvoltage guard and a foldback current limit.
Parameters as published
| Item | Value |
|---|---|
| Output current | 6 A typical, 8 A peak |
| Input voltage range | 4.5 V to 26.5 V |
| Output voltage range | 0.8 V to 5 V, one external resistor |
| Total DC output error | plus or minus 1.75 percent |
| Switching frequency | phase lockable, 250 kHz to 780 kHz |
| Synchronisation | on board, to an external clock |
| Tracking | output voltage tracking for sequencing |
| Status | power good voltage indicator |
| Light load | selectable burst mode |
| Protection | overvoltage, overcurrent, foldback current limit |
| Body | 9 mm by 15 mm by 4.92 mm BGA |
| Grade | E |
| Area | 135 square millimetres |
Numbers that decide the application
A 1.2 V rail at 6 A delivers 7.2 W. At an assumed 85 percent the input is 8.47 W, or 0.71 A from a 12 V bus, and 1.27 W has to leave 1.35 square centimetres of body, which is 0.94 W per square centimetre. That is a quarter of the loss density of the 15 A module in the same family line, and it is the reason a 6 A rail can sit on a card with modest copper under it.
The 26.5 V input ceiling is the most useful number here. A 24 V industrial bus at plus 10 percent is 26.4 V, which clears the ceiling by 100 mV, so this module can run directly from a 24 V rail without a pre regulator, and the margin is stated rather than assumed. At the bottom of the range it regulates down to 0.8 V from that same bus, which is a duty cycle of 3.0 percent, and at 400 kHz that is 75 ns of on time for the switch.
The 8 A peak rating is 33 percent above the 6 A continuous figure and it is a peak current, not a continuous one, so a load that sits at 7 A is outside the continuous rating whatever the peak column says. The foldback limit and the overvoltage guard cover the fault case; they do not make the thermal case go away.
Tracking and the phase lock loop are what the extra pins buy. Two rails that must come up together can be tied through the tracking input instead of being sequenced by an external supervisor, and several modules on one card can share a clock so the input ripple adds at a known phase rather than at a random one.
Where it fits and where it does not
It fits a 24 V industrial bus, a 12 V to 1.2 V point of load at 6 A, a telecom or storage card where a rail has to track another, and a board with several modules that need one clock. It does not fit a rail above 5 V, a load above 6 A continuous, an input above 26.5 V, or a card where the 4.92 mm body is too tall and the 4.32 mm land grid version is required instead.
Supply and second source questions
The body letter and the grade letter both appear in the order code and neither is interchangeable without a statement. The tracking input is also a functional attribute that a substitute may lack while matching the current and voltage, so a cross reference on this part has to include the sequencing pins. Regulators and supervisors for these rails are compared on the power management cross reference page.
Sourcing notes and next step
We quote the EV code with the BGA body and E grade written out and we will say when only the land grid version is available. Send the line items and required date through the BOM shortage recovery page and we will answer with availability. The wider module range sits on the analog and mixed signal IC page.
Tracking and Phase Lock: What Sequencing and a Common Clock Are Worth
The LTM4618EV#PBF is the 6 A module with two features that a plain module does not have: it tracks another rail during start up, and it locks its switching frequency to an external clock between 250 kHz and 780 kHz. Both are features that only pay off in a system with more than one rail, and both have an arithmetic side that is easy to state and rarely is.
Two modules at the same nominal frequency beat at the difference
Two modules set to 500 kHz with a 0.05 percent tolerance on their internal oscillators sit 250 Hz apart, and the difference appears as an amplitude envelope on the combined input current at 250 Hz. That envelope is what an input capacitor sees as a low frequency ripple, and a 250 Hz component is below the control loop's crossover, so it is not rejected by either module. Locking both to one external clock removes the beat entirely and, with a phase offset, turns the two ripple currents into a single waveform at twice the frequency.
Phase spreading divides the input ripple current by the square root of the count
For N identical modules at the same duty cycle and evenly spread in phase, the input capacitor RMS current falls as the output current times the square root of duty times one minus duty, divided by the square root of N. At 6 A per module, 27.5 percent duty and one module, that is 2.68 A. At four modules it is 1.34 A, and at eight modules 0.95 A. The total load current rises with N, so the saving is in capacitor count and temperature rather than in total current: eight modules deliver 48 A with the same input ripple as two modules at 12 A each would have had in phase with two.
| Modules at 6 A, 27.5 percent duty | Total output | Effective ripple frequency | Input capacitor RMS |
| 1 | 6 A | 500 kHz | 2.68 A |
| 2, in phase | 12 A | 500 kHz | 5.36 A |
| 2, anti phase | 12 A | 1 MHz | 1.90 A |
| 4, 90 degrees apart | 24 A | 2 MHz | 2.68 A |
| 8, 45 degrees apart | 48 A | 4 MHz | 3.79 A |
Tracking is a start up property, not a steady state one
The tracking pin lets the output follow another rail's ramp, so two rails arrive at their setpoints together instead of one arriving first and forward biasing a protection diode in the logic that is fed from both. In a system with a 1.2 V core and a 1.8 V input output rail, a 1.2 V rail that comes up first can push current backwards through the 1.8 V rail's own output stage. Tracking removes that, and the tolerance that matters is the tracking error over the ramp rather than the DC error at the end of it. The plus or minus 1.75 percent total DC error is the steady state figure and it does not describe how closely the two ramps track in the middle of the transition.
The 8 A peak is a transient figure with a duty limit
6 A continuous and 8 A peak, with the peak rating attached to a transient and to the thermal path rather than to the inductor's saturation. A load that steps from 3 A to 8 A for a few hundred microseconds is inside the rating if the output capacitor absorbs the difference and the module's own loop has recovered. A load that sits at 8 A is not, because the loss at 8 A is 78 percent above the loss at 6 A and the ball array carries it. The foldback current limit is the protection and it folds back rather than latching, so an overload that clears restores the rail without a power cycle.
The E and I grade order codes carry the same electrical table
Both codes are the 6 A module in the 9 mm by 15 mm by 4.92 mm BGA, both cover 4.5 V to 26.5 V in and 0.8 V to 5 V out, and both carry tracking, power good and the phase lock loop. The difference is the guaranteed temperature window and therefore which qualification the part carries into a build. A board qualified on one and moved to the other keeps the arrangement of its supply network, and the network is the part that does not change with the grade letter.
The module family is on the analog and mixed-signal IC page. A multi rail board that is short of one module is handled through the BOM shortage recovery page, and the schedule is checked on the component lead time page.
Request Quote — In Stock, 100% New & Original, Full Warranty