LTC4418CUF#TRPBF
Product Specifications
LTC4418CUF#TRPBF
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The LTC4418CUF#TRPBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
LTC4418CUF#TRPBF: two supplies, one output, and a 1.5 percent window that decides when to switch
The LTC4418CUF#TRPBF is an Analog Devices dual channel prioritized PowerPath controller. It connects one of two valid supplies to a common output, with V1 as the higher priority input and V2 as the lower one. A supply counts as valid when its voltage has stayed inside its overvoltage and undervoltage window for the configured validation time, so a short dip or spike does not cause a switch. It works from 2.5 V to 40 V, survives a reverse connection down to -42 V, tolerates 60 V on the V1 and V2 pins, blocks both reverse and cross conduction, and draws 26 uA. The overvoltage and undervoltage thresholds are accurate to plus or minus 1.5 percent with adjustable hysteresis. Multiple parts, and the triple channel LTC4417, can be cascaded for more than two inputs. It is the 20-lead 4 mm by 4 mm QFN, and it sits with the rest of the power line on the analog and mixed-signal IC line card.
Plus or minus 1.5 percent is 180 mV on a 12 V rail
An accuracy of 1.5 percent translates into a different window on every rail. On a 5 V rail it is 75 mV, on 12 V it is 180 mV, and on 24 V it is 360 mV. That is the band between the point where the input is still considered good and the point where the part switches away, so it has to be narrower than the tolerance of the upstream supply plus the drop in the wiring. A 12 V supply held to plus or minus 5 percent already swings 600 mV, which is more than three times the window, so the divider on the OV and UV pins has to be set inside that swing rather than at its nominal value.
| Parameter | Vendor figure | Derived figure |
|---|---|---|
| Operating range | 2.5 V to 40 V | one part across 5 V, 12 V and 24 V rails |
| Threshold accuracy | plus or minus 1.5 percent | 75 mV at 5 V, 180 mV at 12 V, 360 mV at 24 V |
| Input tolerance | 60 V on V1 and V2 | survives a transient above the rail |
| Reverse protection | to -42 V | covers a reversed battery connection |
| Operating current | 26 uA | 0.62 mW at 24 V, 1.04 mW at 40 V |
| Switchover | fast non-overlap | output droop limited by the load capacitance |
| Expansion | cascadable with the LTC4417 | three or more inputs |
The validation time is what separates a brownout from a real failure
A supply that dips for a few hundred microseconds during a load step is not a failed supply, and switching to the backup for that dip costs more than riding through it. The adjustable input validation time sets how long a rail must stay inside its window before it is accepted, so a short excursion is ignored and a real loss is acted on. The cost of a long validation time is a longer gap before the backup is trusted, which has to be covered by the output capacitance. That trade is the single most useful adjustment on this part and it is set by one external component.
Selection notes
- Cross conduction blocking means both inputs can be live at the same time without one feeding the other through the body diodes.
- The -42 V reverse rating covers a battery inserted the wrong way, which is a common field event on portable equipment.
- Cascading more than two inputs uses the same part, so the priority chain is extended without a second controller type.
- Hysteresis on the OV and UV comparators prevents the output from chattering when a supply sits exactly at the threshold.
Questions buyers ask
Does it switch fast enough to hold up a rail without a large capacitor? The switchover is non-overlap and fast, but the droop is set by the load current and the output capacitance, so the hold-up capacitor is sized from the load step and the switchover time, not from the controller alone.
Can both inputs be the same voltage? Yes, priority is set by pin assignment, so two identical rails are handled by which pin they enter.
Second sourcing a power path controller across a board is covered on the power management cross reference page, and delivery on allocated parts is under BOM shortage recovery.
Request Quote — In Stock, 100% New & Original, Full Warranty