LTC1661CMS8#TRPBF
Product Specifications
LTC1661CMS8#TRPBF
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The LTC1661CMS8#TRPBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
LTC1661CMS8#TRPBF: Two 10-Bit DACs, 60 uA Each, in an MSOP the Size of a Pin Header
The LTC1661CMS8#TRPBF integrates two 10-bit voltage output converters in an 8-lead MSOP, half the board area of an SO-8, with 60 uA of supply current per converter, a 1 uA sleep mode, rail-to-rail outputs that drive 1000 pF, a 2.7 V to 5.5 V supply range, double buffering so the two outputs can be updated independently or together, a reference input with a constant 260 kOhm impedance over all codes, a three-wire serial interface with Schmitt trigger inputs, and maximum differential nonlinearity of plus or minus 0.75 LSB. The reference input range includes the supply, so the output can be ratiometric to the rail.
This is the converter for a trim, a bias or a threshold in a battery product, where the absolute accuracy of the reference does not matter and the current does. At 120 uA for both converters and 1 uA asleep, it is one of the few dual converters that can stay powered on a coin cell.
Ratiometric output is a feature and a trap at the same time
With the reference tied to the supply, the output is a fixed fraction of the rail, so the converter tracks the rail and a system that ratiometers its measurement against the same rail cancels the rail error entirely. The same connection means the converter's output noise and drift follow the rail: a 100 mV change on the supply moves a mid scale output by 50 mV, which at 10 bits and a 4.096 V reference is twelve codes. A board that ties the reference to the supply to save a reference has to be sure the rail is quiet, and a board that needs an absolute output has to provide a reference.
One code at 10 bits with a 4.096 V reference is 4 mV, and the plus or minus 0.75 LSB of DNL is 0.073 percent of full scale. Those two numbers set the resolution and the monotonicity: the converter is monotonic by specification, so a servo loop that walks the code up in single steps will not get stuck, which is the property that matters for a trim function. The 260 kOhm reference input draws 15.8 uA at 4.096 V, which is 13 percent of the 120 uA the two converters use and has to be in the budget if an external reference is fitted.
| Resolution | Two 10-bit voltage output converters |
| Step size | 4 mV with a 4.096 V reference, 0.073 percent of full scale DNL |
| Supply current | 60 uA per converter, 120 uA total, 360 uW at 3 V |
| Sleep | 1 uA, 0.01 mAh over a year |
| Supply range | 2.7 V to 5.5 V |
| Reference input | Constant 260 kOhm, draws 15.8 uA at 4.096 V, may be tied to the supply |
| Output | Rail to rail, drives 1000 pF |
| Update | Double buffered, independent or simultaneous |
| Interface | Three-wire serial with Schmitt trigger inputs |
| Package | 8-lead MSOP as CMS8, also PDIP in the same family |
Double buffering is what makes two outputs usable together
Without double buffering, writing two converters in sequence produces an intermediate state where one output has the new code and the other still has the old one. In a two-axis trim or a differential bias that intermediate state is a transient the load sees, and in a servo it is a step. With double buffering the codes are loaded into holding registers and both outputs change on one command, so the load sees one transition rather than two. That is the reason to choose this part over two single converters in the same area, and it is invisible in a one line description that lists only resolution and current.
The 1000 pF drive capability is generous for a converter in this class and matters when the output feeds a cable or a long trace to a remote adjustment point. A converter that drives 100 pF rings or becomes unstable with a capacitive load, and the usual fix is a series resistor that then drops voltage across itself. Here the load capacitance is inside the specification, which removes that resistor and its error.
Two questions buyers ask
Can it be used as a digital potentiometer replacement?
Yes, in the sense that it produces a programmed voltage rather than a resistance, and that is usually better: a voltage output does not depend on the resistance of the wiper or on the current through it, so the setting is not disturbed by the load. The difference is that the circuit has to accept a voltage control rather than a resistive one, which usually means an amplifier stage in the same place.
How long does the reference input take to settle with a bypass capacitor?
The 260 kOhm input impedance with a 1000 pF bypass has a 260 us time constant, so a large bypass capacitor on the reference pin turns every reference change into a millisecond scale event. That is fine when the reference is a fixed rail and a problem when the reference itself is being modulated, and it is the reason the data sheet calls the constant impedance a feature: it removes the need for a buffer, not for thought about the bypass.
Ordering and supply
The CMS8 suffix is the 8-lead MSOP on the commercial grade and the TRPBF suffix is tape and reel, lead free. Traps are the resolution, the number of converters and the reference arrangement: the LTC1660 is the octal 10-bit member, the LTC1665 the octal 8-bit member, and a product that needs more outputs moves up the family rather than adding packages. A converter with a fixed internal reference cannot be made ratiometric, and one that is ratiometric cannot be made absolute without an external reference.
We hold and source this family for production and for repair. Start at the analog mixed signal ICs family page, compare a candidate against the ADC and DAC cross reference, and where a converter has to go into an existing instrument, the order in how to verify a drop in replacement covers the reference arrangement and the output capacitance before the first trim.
Request Quote — In Stock, 100% New & Original, Full Warranty