Contact Us

LT1763IDE-3.3#TRPBF

Brand: Analog Devices
Analog Devices LT1763IDE-3.3#TRPBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LT1763IDE-3.3#TRPBF — Analog & Mixed-Signal ICs | Superb Automation

LT1763IDE-3.3#TRPBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LT1763IDE-3.3#TRPBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

LT1763IDE-3.3#TRPBF: a 3.3 V 500 mA low noise rail that cannot run from a single lithium cell

What this order code is

LT1763IDE-3.3#TRPBF is the 3.3 V fixed member of the LT1763 family in the 12 lead 4 mm by 3 mm DFN, industrial grade, lead free and on tape and reel. It supplies 500 mA with 300 mV of dropout, draws 30 microamps, holds its quiescent current in dropout, and reaches 20 microvolts RMS with the 0.01 microfarad bypass capacitor fitted. The fixed output removes the feedback divider, so the accuracy does not depend on two external resistors and the standby current is the regulator's own 30 microamps.

This is the code that appears most often in a bill of materials as a generic 3.3 V regulator, and it is the one where the input rail decides whether the part works. A 3.3 V output at 500 mA needs 3.6 V at the input, so a single lithium cell that runs from 4.2 V down to 3.0 V cannot hold this rail at full load below 3.6 V. The part does not fail, it follows the input down, and the downstream 3.3 V logic sees a rail that sags to 2.7 V at the end of discharge.

Parameters as published

ItemValue
Output voltage3.3 V fixed
Output current500 mA
Dropout at 500 mA300 mV
Minimum usable input at full load3.6 V
Input range1.8 V to 20 V
Quiescent current30 microamps, controlled in dropout
Shutdown currentunder 1 microamp
Output noise20 microvolts RMS with a 0.01 microfarad bypass capacitor
Minimum output capacitor3.3 microfarads
Protectionreverse battery, reverse current, current and thermal limit
Body12 lead DFN, 4 mm by 3 mm, 0.75 mm high
Temperature gradeindustrial
Packingtape and reel, lead free

Numbers that decide the application

From a 5 V rail at 500 mA the part dissipates 0.85 W, which is about the practical ceiling of the 4 mm by 3 mm body with a good pad, and it leaves nothing for a hot enclosure. From 5 V at 250 mA it is 0.43 W and comfortable. From 12 V at 500 mA it is 4.35 W, which is not a regulator question but a two stage question: a buck to 4 V followed by this part is the normal arrangement, and the linear stage then removes the switching residue that the buck leaves on the rail.

The dropout figure of 300 mV at 500 mA is 0.6 ohm, so the headroom needed scales with current. At 100 mA the same part needs only about 60 mV plus the current limit margin, which is why a 3.6 V lithium rail can supply a 3.3 V load at low current and fails at high current. A product that runs its radio at 400 mA in bursts and 5 mA idle will see the rail dip during the burst and recover afterwards, and the depth of the dip is set by the input capacitor and the battery internal resistance as much as by the regulator.

The noise and stability points are identical across the fixed members: 20 microvolts RMS is conditional on the bypass capacitor, the minimum output capacitance is 3.3 microfarads, and ceramic is acceptable without a series resistor. On a 3.3 V rail a 16 bit converter has a 50.3 microvolt least significant bit, so this regulator contributes 0.4 of a bit and is not the accuracy limit of a 16 bit channel. It becomes the limit at 18 bits and above, where the same 20 microvolts is 1.6 bits.

Where it fits and where it does not

It fits a 5 V to 3.3 V analogue or mixed rail, a post regulator after a buck on a 12 V industrial board, and any 3.3 V rail where the input can be held above 3.6 V at full load. It does not fit a single cell lithium product at 500 mA, a 3.3 V input, or a 12 V input at high current. Where the rail has to survive the end of a battery discharge, the part is still usable but only at a current the cell can support above 3.6 V, which is a battery question rather than a regulator one.

Supply and second source questions

The questions we get on this code are about dropout at the actual load current, the grade and the body. A 3.3 V regulator is the most commonly cross referenced part in a bill of materials, and the substitutions that fail are the ones that meet the voltage and the current but not the 300 mV dropout, so the rail sags at a battery end of discharge where the original part held. The members that share the die and the ones that only look similar are listed on the power management cross reference page.

Sourcing notes and next step

We quote this code against the bill of materials and check the four fields that decide whether the line runs: output voltage, grade, body and reel. Where the exact code is short we will say so rather than offer a part with a larger dropout that looks the same on a data sheet summary. Send the line items, quantities and required date through the BOM shortage recovery page, and where a customer is trying to remove a part from a long running board, the obsolete part cross reference hub is where the parts still in production but no longer recommended for new builds are tracked. The family list sits on the analog and mixed signal IC page.

Request Quote — In Stock, 100% New & Original, Full Warranty