Contact Us

AD5422BREZ

Brand: Analog Devices
Analog Devices AD5422BREZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD5422BREZ — Analog & Mixed-Signal ICs | Superb Automation

AD5422BREZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD5422BREZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD5422BREZ: The HART Pin Exists on the LFCSP, Not on This TSSOP Code

The AD5422 is a 16-bit current and voltage output converter built for 4 mA to 20 mA loops, with a 0.01 percent typical total unadjusted error and a 3 ppm per degree C current output drift. The BREZ order code is the TSSOP body. The HART coupling pin, CAP2, is on the LFCSP version only, so a board that planned to superimpose a HART modem on the current loop using this code has no pin to do it with. That single package detail decides the whole architecture of a loop powered transmitter, and it is far easier to catch at the bill of materials than at first article.

Compliance voltage is a supply decision

The current output can hold its value only while the loop has headroom: the published compliance range is 0 V to AVDD minus 2.5 V. From a 24 V rail that is 21.5 V, which has to cover the sense resistor at the receiving end, the cable resistance and any series protection. A 250 ohm sense resistor at 20 mA already drops 5 V, so a 500 m of cable at 20 ohm per 100 m adds another 2 V, and the transmitter still needs its 2.5 V of internal headroom: 24 V is enough only if nothing else is in the loop. From a 12 V rail the 9.5 V of compliance is often the real limit and not the converter accuracy.

What the accuracy figures mean at 20 mA

One 16-bit step over a 20 mA span is about 305 nA. The 0.01 percent of full scale typical error is 2 uA, which is 6.5 steps, so the typical part is fine for a 4 digit process reading and the guaranteed limit, not the typical figure, is what a loop needs. Drift of 3 ppm per degree C over the 145 C industrial span is 435 ppm, or 8.7 uA at 20 mA, and that term grows without limit once the cabinet runs hot. That is why the internal reference drift of 10 ppm per degree C maximum is worth checking against the loop accuracy target before the converter resolution is discussed at all.

Output rangeOverrange optionWhere it is used
4 mA to 20 mANoneStandard transmitter, live zero at 4 mA
0 mA to 20 mANoneLegacy loops and drives
0 mA to 24 mA20 percentValve and actuator control with a fault band
0 V to 5 V, 0 V to 10 V10 percentVoltage input controllers and PLC analogue cards
Plus or minus 5 V, plus or minus 10 V10 percentBipolar drives and setpoints

Settling, slew and the clear pin

Voltage output settling is quoted as 18 us for a 512 step change to 0.03 percent of full scale, and the current output settles in about 10 us. With the digital slew rate control enabled the output moves at 1 V per microsecond, which is slow on purpose: a step change on a 4 mA to 20 mA loop is a step change on a valve, and the slew control turns a bang into a ramp. The asynchronous CLEAR pin forces the output to zero scale, midscale or the low end of the current range, so a watchdog can put the loop in a defined state without a supply cycle. The supply rails are 10.8 V to 40 V on AVDD with AVSS from minus 26.4 V to minus 3 V, and the sum of the two must stay under 52.8 V.

Sourcing the 16-bit member of the pair

The 12-bit AD5412 is pin compatible with the 16-bit AD5422, so a shortage on one can sometimes be covered by the other if the accuracy budget allows. That is a resolution question, not a pin question, and it has to be answered against the loop accuracy target rather than against the socket. The ADC DAC cross reference page covers the family, the obsolete part cross reference hub page covers the end of life case, and lot checks follow the incoming inspection plan.