Contact Us

LT1761MPS5-3.3#TRPBF

Brand: Analog Devices
Analog Devices LT1761MPS5-3.3#TRPBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LT1761MPS5-3.3#TRPBF — Analog & Mixed-Signal ICs | Superb Automation

LT1761MPS5-3.3#TRPBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LT1761MPS5-3.3#TRPBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

LT1761MPS5-3.3#TRPBF: 3.3 V at 100 mA with 20 microvolts of noise, and where the headroom runs out

What this order code is

LT1761MPS5-3.3#TRPBF is the 3.3 V fixed member of the LT1761 family in the 5 lead TSOT-23, in the MP grade on a reel. It is the same die as the other fixed codes, with the output set inside the package, so it delivers 100 mA from 1.8 V to 20 V with 300 mV of dropout and 20 microamps of quiescent current, and 20 microvolts RMS of output noise once the reference pin is bypassed.

Choosing the fixed 3.3 V code over the adjustable one removes the resistor pair and therefore removes a source of error and a line from the bill of materials. The trade is that the output cannot be trimmed, so a system that needs 3.4 V or 3.0 V needs the adjustable code or a different family member.

Parameters as published

ItemValue
Output on this code3.3 V fixed
Output current100 mA
Input range1.8 V to 20 V
Dropout at 100 mA300 mV
Output noise20 uV RMS, 10 Hz to 100 kHz, with bypass capacitor
Quiescent current20 uA
Shutdown currentbelow 0.1 uA
Output capacitorstable from 1 uF ceramic
Fixed optionsnine voltages from 1.2 V to 5 V
Protectionreverse battery, reverse current, current limit, thermal
External diodesnone required
Body5 lead TSOT-23
GradeMP
Packingreel

Numbers that decide the application

300 mV of dropout at 100 mA is 3 ohm, so a 3.3 V output needs 3.6 V at the input at full load. A 3.3 V system rail at minus 5 percent is 3.135 V, which is 465 mV below that, so this part cannot post regulate its own rail; it needs an upstream rail that is higher, which in practice means 5 V, a 3.6 V or 4.2 V lithium cell, or a switching stage. From 5 V at 100 mA the part dissipates 170 mW, which the TSOT-23 removes on a modest copper area, and from 12 V the same current is 870 mW, which it does not.

20 microvolts RMS on 3.3 V is 6.1 parts per million. One code of a 16 bit converter on a 3.3 V span is 50 microvolts, so the regulator contributes 0.4 of a code, and one code of a 12 bit converter is 806 microvolts, so the regulator is 2.5 percent of a code. That is the range in which this part stops being the limiting noise source and the converter or the reference takes over.

20 microamps of quiescent current is 66 microwatts at 3.3 V and 175 mAh over a year, and the shutdown current below 0.1 microamps is 0.33 microwatts, so a switched rail saves almost all of the bias. The 1 microfarad minimum output capacitor is small enough to be a ceramic without a series resistor, which is where older regulators needed a tantalum to stay stable, and that is a reliability point as much as a cost one.

Where it fits and where it does not

It fits analog and digital 3.3 V rails in portable instruments, frequency synthesizer supplies, sensor front ends and any board where a quiet 3.3 V has to come from a higher rail. It does not fit a load above 100 mA, where the 500 mA member of the family in a larger body is the right part, and it does not fit a 3.3 V input, because the dropout leaves no room. It also does not fit an application that needs the output to be adjusted at test, which is the case for the adjustable code.

Supply and second source questions

The questions that come back on this code are about the grade letter, the input rail and the output voltage. The MP letter string is a grade, and a reel without it is a different grade with different guaranteed limits. The input rail is a hard rule rather than a preference: 3.6 V minimum at full load means a 3.3 V source cannot feed it. Regulators that hold 300 mV at 100 mA in a 5 lead body and parts that need a larger output capacitor or a series resistor are separated on the power management cross reference page.

Sourcing notes and next step

We quote this code against the bill of materials and confirm the fields that decide the reel: output voltage, body, grade and packing. The output voltage is part of the ordering string and the family has nine of them in the same body, so a line that says LT1761 without the voltage is not a line we can quote against stock. Send the line items, quantities and required date through the BOM shortage recovery page and we will answer with availability, and where the exact code is short we will say so rather than substitute a different voltage. The wider regulator list sits on the analog and mixed signal IC page.

Request Quote — In Stock, 100% New & Original, Full Warranty