Contact Us

LT1158ISW#TRPBF

Brand: Analog Devices
Analog Devices LT1158ISW#TRPBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LT1158ISW#TRPBF — Analog & Mixed-Signal ICs | Superb Automation

LT1158ISW#TRPBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LT1158ISW#TRPBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

LT1158ISW#TRPBF: A Half Bridge Gate Driver That Removes the Matched FET Pair

The LT1158ISW#TRPBF is a half bridge N-channel power MOSFET driver that runs from 5 V to 30 V, drives the top device above the positive rail with an internal charge pump, and controls both transistors from a single input pin. Transition times are 150 ns driving 3000 pF, peak drive current is over 500 mA, and the gate to source voltage is internally limited to 14.5 V at higher supply voltages. The adaptive non-overlap gate drive is the feature that matters most: protection against shoot through is built in, so the two MOSFETs no longer have to be a matched pair. A continuous current limit loop regulates short circuit current in the top device, the FAULT output can be returned to the enable input so the part shuts down and retries, and the inputs accept TTL and CMOS levels. The order code reads I for the industrial grade, SW for the wide body 16-lead SO and TRPBF for tape and reel, lead free.

150 ns into 3000 pF, read as a current

Five hundred milliamps into 3000 pF is 166.7 V per microsecond, and 150 ns at that rate is a 25 V swing, which is consistent with a 24 V rail. That number is the way to read the drive capability: a larger gate charge stretches the transition proportionally, and a 6000 pF device would take 300 ns at the same peak current. The average current is much smaller than the peak. Thirty nanocoulombs of gate charge at 10 V switched at 100 kHz is 3 mA of average supply current and 30 mW of drive power per device, which is what the charge pump and the supply have to deliver continuously.

FunctionHalf bridge driver for two N-channel MOSFETs, single input
Supply range5 V to 30 V
Transition time150 ns driving 3000 pF
Peak drive currentOver 500 mA, 166.7 V per microsecond into 3000 pF
Top side driveInternal charge pump for continuous DC operation
Gate to source limit14.5 V, 60 percent of a 24 V rail
ProtectionAdaptive non-overlap, continuous current limit, fault output with retry
PackageWide body 16-lead SO

Adaptive non-overlap is a bill of materials change

In a conventional half bridge the dead time is set by resistor and capacitor values that have to be chosen against the slowest and the fastest device in the population, and the two transistors are then bought as a matched pair. The LT1158 senses the gate behaviour and inserts the gap itself, so a board can carry two devices from the same reel without a matching step. That is a procurement simplification as much as an electrical one: a matched pair is a second order line, often from a second supplier, and it is the first thing to disappear in an allocation.

The current limit loop works on the drain to source voltage of the top device. Higher start up currents are allowed as long as that voltage stays under 1.2 V, which at 50 milliohm is 24 A, and the limit takes over once the device comes out of saturation. The threshold is therefore set by the transistor's on resistance rather than by a separate sense resistor, and the FAULT output can drive the enable pin through a capacitor so a fault latches off and retries after a delay.

Where the charge pump matters

A bootstrap capacitor can hold the top gate up only while the switch node keeps moving. A bridge that has to hold the top device on continuously, which is what a DC motor drive does at 100 percent modulation, cannot use one. The internal charge pump on this part is what allows DC operation without an external supply, and the transition between PWM and DC operation is handled internally rather than by the controller. Typical uses are PWM of high current inductive loads, half and full bridge motor control, synchronous step-down stages, three phase brushless drive and transducer drivers.

Two questions buyers ask

Do the two MOSFETs have to match?
No, and that is the point of the adaptive non-overlap circuit. They do have to be rated for the rail and for the current, and the top device's on resistance sets the current limit threshold, so it should not be changed without rechecking that number.

Can it drive a 30 V rail directly?
The supply range stops at 30 V, so a 24 V rail with tolerance fits and a 30 V rail sits at the limit. The gate clamp at 14.5 V keeps standard level devices inside their gate rating, but the supply headroom is a separate check from the gate drive.

Ordering and supply

The LT1158ISW#TRPBF is the industrial grade in the wide body 16-lead SO, tape and reel. The SW suffix is the package, and the narrow body SO of other family members is not interchangeable with it because the pin count and the thermal path differ.

We hold and source this family for production and repair quantities. Start from the family page for analog mixed signal ICs, check a proposed alternative against the power management cross reference, and if the driver is in hand but the MOSFETs are not, send the shortage list through BOM shortage recovery so the pair is checked together.

Request Quote — In Stock, 100% New & Original, Full Warranty