Contact Us

HMC-APH462-Die

Brand: Analog Devices
Analog Devices HMC-APH462-Die is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HMC-APH462-Die — Analog & Mixed-Signal ICs | Superb Automation

HMC-APH462-Die

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The HMC-APH462-Die from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

HMC-APH462-Die: 0.8 W from 15 GHz to 27 GHz, and the watt in the title

The HMC-APH462-Die is a two stage gallium arsenide HEMT power amplifier chip specified from 15 GHz to 27 GHz, with 17 dB of gain, 29 dBm at 1 dB compression and 37 dBm of output third order intercept from a 5 V supply drawing 1440 mA across four drain feeds. The document title calls it a 1 W amplifier and the description calls it 0.8 W, and the difference is the usual one between saturation and compression.

Published values

ParameterValue
Frequency range15 GHz to 27 GHz
Output power at 1 dB compression29 dBm typical, about 0.8 W
Saturated output powerabout 30 dBm, the 1 W in the title
Small signal gain16 dB typical from 15 to 17 GHz, 17 dB from 17 to 27 GHz
Output third order intercept34 dBm from 15 to 17 GHz, 37 dBm from 17 to 27 GHz
Input return loss15 dB to 17 GHz, 18 dB above 17 GHz
Output return loss15 dB to 17 GHz, 18 dB above 17 GHz
Supply5 V on four drain feeds, 1440 mA in total
Gate biasVGG per stage, set for 1440 mA total
Die size3.70 mm x 2.62 mm x 0.1 mm
MetallisationTi/Au bond pads and backside, fully passivated

1 W in the title, 0.8 W in the text

29 dBm is 794 mW and 30 dBm is 1 W. The title takes the saturated figure and the description takes the compression figure, and both are honest as long as a link budget knows which one it is using. A system that needs 1 W of linear output should not read the title, because at 1 W the part is already at saturation and the intercept no longer describes it.

The practical rule is to take the compression figure for any link that carries a modulated signal and the saturation figure only for a continuous wave or a pulse where the waveform does not care about compression. For a radar pulse the saturation figure is the right one, and for a point to point radio the compression figure is.

Four drains at 5 V and 1440 mA

1440 mA across four feeds is 360 mA per feed, and 5 V at 1.44 A is 7.2 W of dc input. At 29 dBm out that is about 11 percent conversion, so 6.4 W leaves as heat from a die of 9.7 square millimetres. That is 0.66 W per square millimetre, and the backside of the chip is the only path.

Four drain feeds rather than one is a radio frequency decision: each stage has its own decoupling so that the stages do not couple through the bias line. A module that ties them together at the package edge will show a gain peak or a dip that moves with the capacitor placement, and the vendor's evaluation circuit is the reference for how the feeds are brought out.

Where 15 GHz to 27 GHz sits

The band covers Ku and K band point to point, point to multipoint and VSAT links, and the 17 dB of gain is enough to make this a driver rather than a final stage in a radio, or a final stage in a short link. The linearity of 37 dBm of intercept above 17 GHz is what allows a multi carrier signal to pass without the intermodulation products landing in the receive band.

The gain is higher above 17 GHz than below, which is worth knowing when the part is used to equalise a chain. A system that needs a flat output across the band will need a slope correction somewhere, and the amplifier is already providing about 1 dB of it.

Die handling

The pads and the backside are Ti/Au metallised and the device is passivated, so the chip is compatible with thermocompression and thermosonic bonding as well as conventional die attach. The metal backside means a eutectic or a conductive epoxy attach both work, and the choice between them is a thermal one.

All the published data is probe measured in a 50 ohm environment, so a module measures what the assembly adds to that. For a first article the probe data is the reference and the module measurement is the result, and the difference between them is the assembly rather than the die.

For a board that has to keep running while a reel runs out, the amplifier cross reference is where the family alternatives sit, defense grade components is the check list before a substitute goes in, and the pin to pin cross reference is how a gap is covered without a new line item.

Two questions buyers ask

Is this a 1 W or a 0.8 W amplifier? Both figures appear on the same page: 29 dBm at 1 dB compression, about 0.8 W, and roughly 30 dBm saturated, which is the 1 W in the title. Use the compression figure for a linear signal.

How many supply feeds does it need? Four drain feeds at 5 V in total 1440 mA, with the gate bias set per stage. The feeds are separate so that the stages do not couple through the bias network.